Search results for: 'match nmr tube 3 mm'

Pack of:
• One 3.2 mm sapphire rotor (B6939)
• One 3.2 mm SP1 drive cap (HZ07306)
• Two 3.2 mm ZrO₂ drive caps (HZ12372)

Pack of:
• One 7 mm ZrO₂ rotor
• Three 7 mm Kel-F drive caps without hole

Pack of:
• One 7 mm ZrO₂ CRAMPS rotor
• Two 7 mm Kel-F drive caps without hole
• One cylindric screw M2x25
• One 7 mm CRAMPS Kel-F spacer

For use with Microtubes

Coded caps for SampleJet use

Pack of:
• One 2.5 mm Thin Wall ZrO₂ MAS rotor
• Two 2.5 mm SP1 bottom caps for Thin Wall rotor (HZ06694)
• Two 2.5mm SP1 drive caps for Thin Wall rotor (HZ06693)

For use with 2.5 mm caps for Regular Wall MAS rotors:
• HZ05269 (SP1 drive cap)
• HZ05276 (SP1 bottom cap)

Pack of:
• One 4 mm ZrO₂ HR MAS rotor (labeled)
• Three 4 mm Kel-F drive cap (H6304)
• One 4 mm 12 µL PTFE spacer
• One Kel-F thread pin (HZ04800)
• One M2x25 cylindric screw

Pack of:
• One 4 mm ZrO₂ HR MAS rotor (labeled)
• Three 4 mm Kel-F drive cap (H6304)
• One 4 mm 50 µL PTFE spacer
• One Kel-F thread pin (HZ04800)
• One M2x25 cylindric screw

For Use with Pressure Valve (PCAV) and Controlled Atmosphere (CAV) Tubes

Kit contains:
• 3.2 mm cap remover for Thin Wall rotor
• 3.2 mm filling funnel for Thin Wall rotor
• 3.2 mm cap set tool for Thin Wall rotor
• 3.2 mm packer for Thin Wall rotor

Pack of:
• One 4 mm ZrO₂ HR MAS rotor (labeled)
• Three 4 mm Kel-F drive cap (H6304)
• One 4 mm 12 µL Kel-F spacer
• One Kel-F thread pin (HZ04800)
• One M2x25 cylindric screw

For Use with Pressure Valve (PCAV) and Controlled Atmosphere (CAV) Tubes

For Use with Pressure Valve (PCAV) and Controlled Atmosphere (CAV) Tubes

For use with Microtubes

Material: Polyethylene

For use with 3.2 mm caps for Regular Wall rotor:
• SP1 drive cap (HZ07306)
• ZrO₂ drive cap (HZ12372)

For use with:
• 3.2 mm Regular Wall rotor (HZ09244)
• 3.2 mm sapphire rotor (B6939)

Material: Polyethylene

Material: Polyethylene

Material: Polyethylene

Material: Polyethylene

Material: Polyethylene

Material: Polyethylene

Material: Polyethylene

Material: Polyethylene

Material: Polyethylene

Material: Polyethylene

Material: Polyethylene

Material: Polyethylene

Material: Polyethylene

Material: Polyethylene

Material: Polyethylene

Material: Polyethylene

Material: Polyethylene

Material: Polyethylene

Material: Polyethylene

Material: Polyethylene

Material: Polyethylene

Material: Polyethylene

Material: Polyethylene

For use with:
• 4 mm ZrO₂ MAS rotor (H6283)
• 4 mm sapphire MAS rotor (H8932)
• 4 mm Si₃N₄ MAS rotors (K1911)

Material: Polyethylene

For use with:
• 4 mm ZrO₂ MAS rotor (H6283)
• 4 mm sapphire MAS rotor (H8932)
• 4 mm ZrO₂ HR-MAS rotors (HZ05537, HZ05528, HZ07213)

For use in 5mm thin walled NMR tubes up to 8 inches in length

Tool for sample compression into 4 mm MAS rotor

Tool for sample compression into 7 mm MAS rotor

Tool for cap removal from 4 mm MAS rotor

Tool for cap removal from 7 mm MAS rotor

Tool for sample loading into 7 mm MAS rotor

Tool for sample loading into 4 mm MAS rotor

Tool for sample compression into 3.2 mm Regular Wall MAS rotor

Tool for sample loading into 3.2 mm Regular Wall MAS rotor

Material: Polyethylene

Material: Polyethylene

Material: Polyethylene

Material: Polyethylene

0.998

Tool for sample loading into 1.9 mm MAS rotor

Tool for sample compression into 1.9 mm MAS rotor

Tool for cap removal from 1.9 mm MAS rotor

For use with 1.9 mm MAS rotor

For use with 1.9 mm MAS rotor

For use with 0.7 mm MAS rotor

For use with 0.7 mm MAS rotor

For use with 3.2 mm Thick Bottom, Regular Wall MAS rotors (HZ09243)

For use with 3.2 mm Thin Wall MAS rotors (HZ16252)

Material: Polyethylene

0.7mm ZrO₂ rotor tested with Vespel caps

Each kit includes:
• One 0.7 mm MAS rotor
• Four 0.7 mm SP1 drive caps
• Four 0.7 mm SP1 bottom caps

For use with:
• 3.2 mm Regular Wall MAS rotors (HZ09244)
• 3.2 mm sapphire rotor (B6939)
• T° Range: (-30 to +70°C)

For use with:
• 4 mm MAS rotor (H6283)
• 4 mm HR-MAS rotors (HZ05537, HZ05528, HZ07213)

For use with 3.2 mm Thin Wall MAS rotors (HZ16252)

Tools for cap positioning on 1.9 mm MAS rotor

• Sodium Salt Hydrate
• 98% CP
• 1 g

For use with 7 mm CRAMPS rotor only

Tool for cap removal for 3.2 mm Regular and Thin Wall MAS rotor

For casting 5 mm gels

For casting 5.4 mm gels

For casting 6 mm gels

For use with regular wall 2.5 mm MAS rotors (HZ05165)
Length: 2 mm

For use with regular wall 2.5 mm MAS rotors (HZ05165)
Length: 2 mm

• Sodium Salt Hydrate
• 99% ¹³C, 98% D
• 1 g

For use with 3.2 mm Thin Wall MAS rotors (HZ16252)
• T° Range: (-30 to +70°C)

99% ¹³C

Kit contains:
• Ten silicone soft plugs with silica tubing
• One 3.2mm soft plug depth gauge
• One 3.2mm soft plug removal tool

For use in Thin Wall 5 mm Tubes

For use with 3.2 mm caps for Regular Wall rotor:
• SP1 drive cap (HZ07306)
• ZrO₂ drive cap (HZ12372)

Tools for cap positioning on 3.2 mm Regular Wall and Thin Wall MAS rotors

• For 5 mm Screw Thread Tubes
• Septa included

• For 5 mm Screw Thread Tubes
• Cap not included

• For 10 mm Screw Thread Tubes
• Cap not included

Tools for cap positioning on 7 mm MAS rotors

• DMPG, Perdeuterated

• For 5 mm Screw Thread Tubes
• Septa not included

• For 10 mm Screw Thread Tubes
• Septa not included

For All TE102 or TE011

Tool for cap removal from 2.5 mm Thin Wall MAS rotor

Tool for cap removal from 2.5 mm Regular Wall MAS rotor

Tool for sample loading into 2.5 mm Regular Wall MAS rotor

Tool for sample compression into 2.5 mm Regular Wall MAS rotor

Tool for sample compression into 2.5 mm Thin Wall MAS rotor

Tool for sample loading into 2.5 mm Thin Wall MAS rotor

For use with 4 mm MAS rotor (H6283)

Each set contains:
• Ten Kel-F inserts
• Ten sealing screws
• Ten plugs
• One set of tools (Fork screwdriver, blunt-ended screwdriver, extraction screw)

Pack of:
• One 3.2mm Thick Bottom, Regular Wall ZrO₂ MAS rotor (HZ09243)
• One 3.2mm SP1 drive cap (HZ07306)
• Two 3.2mm Kel-F drive cap (HZ07308)
• One PTFE spacer (HZ13618)

For use with 2.5 mm Thin Wall MAS rotors (HZ15196)

For use with 2.5 mm Thin Wall MAS rotors (HZ15196)

• For 5 mm Screw Thread Tubes
• Septa included

• For 10 mm Screw Thread Tubes
• Septa included

• B-1 Immunoglobulin G Binding Domain (GB1)
• Residues 303-357 of the protein G, with T303Q mutation
• Size: 6.2 kDa
• Labeling: ¹³C, ¹⁵N

• Full length Ubiquitin (Residue 1-76)
• Protein size: 6.8 kDa
• Labeling: ¹³C, ¹⁵N

• SRC Homology 3 domain (SH3)
• Number of residues: 62
• Protein size: 5.6 kDa
• Labeling: ¹³C, ¹⁵N

• Sodium Salt Hydrate
• 99% ¹³C, 98% D
• 1 g

• 100 mg
• 99% ¹³C
• 98% CP

• 99% ¹³C
• 98% CP

99% ¹³C

• 1 g
• 99% ¹³C
• 98% CP

99% ¹³C

• 100 mg
• 99% ¹³C
• 98% CP

• 99% ¹³C
• 1 g

• 99% ¹³C
• 1 g

• 100 mg
• 99% ¹³C
• 98% CP

• 1 g
• 99% ¹³C
• 95% CP

99% ¹³C

99% ¹³C

• 99% ¹³C
• 1 g

99% D

98% D

• B-1 Immunoglobulin G Binding Domain (GB1)
• Residues 303-357 of the protein G, with T303Q mutation
• Size: 6.2 kDa
• Labeling: ¹³C, ¹⁵N

• Full length Ubiquitin (Residue 1-76)
• Protein size: 6.8 kDa
• Labeling: ¹³C, ¹⁵N

• SRC Homology 3 domain (SH3)
• Number of residues: 62
• Protein size: 5.6 kDa
• Labeling: ¹³C, ¹⁵N, D

• Full length Ubiquitin (Residue 1-76)
• Protein size: 6.8 kDa
• Labeling: ¹³C, ¹⁵N, D

• B-1 Immunoglobulin G Binding Domain (GB1)
• Residues 303-357 of the protein G, with T303Q mutation
• Size: 6.2 kDa
• Labeling: ¹³C, ¹⁵N

• DMPC, Perdeuterated

D6PC, Perdeuterated

• D7PC, Perdeuterated

• DMPE, Perdeuterated

DOPC, Perdeuterated

DOPG, Perdeuterated

• DOPG, Deuterated on both acyl chains
• Deuteration: 98 % (except alpha protons that are Deuterated at 50 %)
• Chemical purity > 99 %

• Sodium Salt Hydrate
• 99% ¹³C, 98% D
• 1 g

• Sodium Salt Hydrate
• 97% CP
• 250 mg

• D6PC, Deuterated on both acyl chains
• 250 mg
• Deuteration: 98 %
• Chemical purity > 99 %

• D7PC, Deuterated on both acyl chains
• 250 mg
• Deuteration: 98 %
• Chemical purity > 99 %

• DMPC, Deuterated on both acyl chains
• 250 mg
• Deuteration: 98 %
• Chemical purity > 99 %

• D6PG, Deuterated on both acyl chains
• 250 mg
• Deuteration: 98 %
• Chemical purity > 99 %

• D7PG, Deuterated on both acyl chains
• 250 mg
• Deuteration: 98 %
• Chemical purity > 99 %

• DMPG, Deuterated on both acyl chains
• 250 mg
• Deuteration: 98 %
• Chemical purity > 99 %

• DPPG, Deuterated on both acyl chains
• 250 mg
• Deuteration: 98 %
• Chemical purity > 99 %
• 100mg

• D6PE, Deuterated on both acyl chains
• 250 mg
• Deuteration: 98 %
• Chemical purity > 99 %

• D7PE, Deuterated on both acyl chains
• 250 mg
• Deuteration: 98 %
• Chemical purity > 99 %

• DMPE, Deuterated on both acyl chains
• 250 mg
• Deuteration: 98 %
• Chemical purity > 99 %

• DPPE, Deuterated on both acyl chains
• 250 mg
• Deuteration: 98 %
• Chemical purity > 99 %

• DOPC, Deuterated on both acyl chains
• 250 mg
• Deuteration: 98 % (except alpha protons that are Deuterated at 50 %)
• Chemical purity > 99 %

• Full length Ubiquitin (Residue 1-76)
• Protein size: 6.8 kDa
• Labeling: ¹³C, ¹⁵N, D

• B-1 Immunoglobulin G Binding Domain (GB1)
• Residues 303-357 of the protein G, with T303Q mutation
• Size: 6.2 kDa
• Labeling: ¹³C, ¹⁵N, D

• Sodium Salt Solution, 5 mM Tris Buffer
• 98% D

• Sodium Salt Solution, 5 mM Tris Buffer
• 98% D

99% ¹³C, 97% D

CAS number: 285978-08-7
¹³CD₃CH(NH₂)CO₂H

Pack of:
• One 3.2 mm Regular Wall ZrO₂ MAS rotor (HZ09244)
• Three 3.2 mm SP1 drive caps (HZ07306)

• DOPE, Deuterated on both acyl chains and ethanolamine
• Deuteration: 98 % (except alpha protons that are Deuterated at 50 %)
• Chemical purity > 99 %

• DPPC, Deuterated on both acyl chains
• 250 mg
• Deuteration: 98 %
• Chemical purity > 99 %

For use with 4 mm High Speed MAS rotor only. Please refer to item HZ12360 for regular 4mm SP1 cap

¹³CD₂HCD(NH₂)CO₂H

99% ¹³C, 98% ¹⁵N, 98% CP

• 100 mg
• 99% ¹³C

• Sodium Salt Solution, 5 mM Tris Buffer
• 98% D

Tools for cap positioning on 2.5 mm Regular Wall and Thin Wall MAS rotors

• 1 g
• 98% D

99% ¹³C

• 100 mg
• 99% ¹³C
• 98% CP

• 1 g
• 98%¹³C
• 95% CP

• 98% ¹³C
• 95% CP

• 250 mg
• 99% ¹³C
• 98% CP