Search results for: 'nmr tube 5mm pack of 10'

5 mm Gel NMR Starter Kit (700 MHz)

NE-373-B-5/4.2
4 - 6 weeks

5 mm Gel NMR Starter Kit (900 MHz)

NE-373-C-5/4.2
4 - 6 weeks

3 mm Shigemi microtube set matched with D2O

BMS-003

$175.00

Stock

Compatible with all manufacturers probes

3 mm Shigemi microtube set matched with Chloroform-d

CMS-003

$175.00

2-4 weeks

Compatible with all manufacturers probes

3 mm Shigemi microtube set matched with DMSO-d6

DMS-003

$190.00

2-4 weeks

Compatible with all manufacturers probes

3 mm Shigemi microtube set matched with Methanol-d4

MMS-003

$190.00

2-4 weeks

Compatible with all manufacturers probes

10 mm Washer Glass Body

NE-231-G10

$61.10

3 - 4 weeks

Universal Jet Tube Cleaner with 24/40 Joint for 2.5 mm

WG-7200-J1

$519.50

2-4 weeks

10 mm Positioning and Extraction Rod

NE-341-10

$54.30

3 - 4 weeks

4 mm ZrO2 HR-MAS rotor with 12 µL PTFE spacer + caps

HZ05538

$1,273.20

Stock

Pack of:
• One 4 mm ZrO₂ HR MAS rotor (labeled)
• Three 4 mm Kel-F drive cap (H6304)
• One 4 mm 12 µL PTFE spacer
• One Kel-F thread pin (HZ04800)
• One M2x25 cylindric screw

4 mm ZrO2 HR-MAS rotor with 50 µL PTFE spacer + caps

HZ07213

$1,239.70

Stock

Pack of:
• One 4 mm ZrO₂ HR MAS rotor (labeled)
• Three 4 mm Kel-F drive cap (H6304)
• One 4 mm 50 µL PTFE spacer
• One Kel-F thread pin (HZ04800)
• One M2x25 cylindric screw

PTFE/Silicone Rubber Septum for 4 and 5 mm Tubes, Pack of 36

TR-LS-01

$22.00

2-4 weeks

5 and 10 mm PEEK Solvent Capillary 1/8"

NE-231-S5

$42.10

3 - 4 weeks

2.5 mm Shigemi microtube set matched with D2O

BMS-0025

$205.00

2-4 weeks

Compatible with Bruker probes only

5 mm Shigemi microtube set matched with D2O

BMS-005B

$160.00

Stock

Compatible with Bruker probes only

5 mm Shigemi microtube set matched with D2O

BMS-005J

$160.00

2-4 weeks

Compatible with Jeol probes only

5 mm Shigemi microtube set matched with D2O

BMS-005V

$160.00

Stock

Compatible with Varian probes only

2.5 mm Shigemi microtube set matched with Chloroform-d

CMS-0025

$205.00

2-4 weeks

Compatible with Bruker probes only

5 mm Shigemi microtube set matched with Chloroform-d

CMS-005B

$160.00

2-4 weeks

Compatible with Bruker probes only

5 mm Shigemi microtube set matched with Chloroform-d

CMS-005J

$160.00

2-4 weeks

Compatible with Jeol probes only

5 mm Shigemi microtube set matched with Chlorofrom-d

CMS-005V

$160.00

2-4 weeks

Compatible with Varian probes only

2.5 mm Shigemi microtube set matched with DMSO-d6

DMS-0025

$205.00

2-4 weeks

Compatible with Bruker probes only

5 mm Shigemi microtube set matched with DMSO-d6

DMS-005B

$175.00

2-4 weeks

Compatible with Bruker probes only

5 mm Shigemi microtube set matched with DMSO-d6

DMS-005J

$175.00

2-4 weeks

Compatible with Jeol probes only

5 mm Shigemi microtube set matched with DMSO-d6

DMS-005V

$175.00

2-4 weeks

Compatible with Varian probes only

2.5 mm Shigemi microtube set matched with Methanol-d4

MMS-0025

$205.00

2-4 weeks

Compatible with Bruker probes only

5 mm Shigemi microtube set matched with Methanol-d4

MMS-005B

$175.00

2-4 weeks

Compatible with Bruker probes only

5 mm Shigemi microtube set matched with Methanol-d4

MMS-005J

$175.00

2-4 weeks

Compatible with Jeol probes only

5 mm Shigemi microtube set matched with Methanol-d4

MMS-005V

$175.00

2-4 weeks

Compatible with Varian probes only

5 mm Shigemi Advanced microtube set matched with D2O

BMS-005TB

$190.00

2-4 weeks

Compatible with Bruker probes only

5 mm Shigemi Advanced microtube set matched with D2O

BMS-005TJ

$190.00

2-4 weeks

Compatible with Jeol probes only

5 mm Shigemi Advanced microtube set matched with D2O

BMS-005TV

$190.00

2-4 weeks

Compatible with Varian probes only

5 mm Shigemi Advanced microtube set matched with Chloroform-d

CMS-005TB

$190.00

2-4 weeks

Compatible with Bruker probes only

5 mm Shigemi Advanced microtube set matched with Chloroform-d

CMS-005TJ

$190.00

2-4 weeks

Compatible with Jeol probes only

5 mm Shigemi Advanced microtube set matched with Chloroform-d

CMS-005TV

$190.00

2-4 weeks

Compatible with Varian probes only

5 mm Shigemi Advanced microtube set matched with DMSO-d6

DMS-005TB

$205.00

2-4 weeks

Compatible with Bruker probes only

5 mm Shigemi Advanced microtube set matched with DMSO-d6

DMS-005TJ

$205.00

2-4 weeks

Compatible with Jeol probes only

5 mm Shigemi Advanced microtube set matched with DMSO-d6

DMS-005TV

$205.00

2-4 weeks

Compatible with Varian probes only

5 mm Shigemi Advanced microtube set matched with Methanol-d4

MMS-005TB

$205.00

2-4 weeks

Compatible with Bruker probes only

5 mm Shigemi Advanced microtube set matched with Methanol-d4

MMS-005TJ

$205.00

2-4 weeks

Compatible with Jeol probes only

5 mm Shigemi Advanced microtube set matched with Methanol-d4

MMS-005TV

$205.00

2-4 weeks

Compatible with Varian probes only

4 mm CRAMPS PTFE spacer

HZ1872

$66.70

3-6 weeks

For use with CRAMPS rotor only

4 mm CRAMPS PE spacer

HZ2245

$76.50

3-6 weeks

For use with CRAMPS rotor only

Complete Coaxial System with 3.30 mm Insert Tube

517-COMPLETE

$61.10

2-4 weeks

Complete Coaxial System with 2.97 mm Insert Tube

518-COMPLETE

$61.10

2-4 weeks

Complete Coaxial System with 2.52 mm Insert Tube

519-COMPLETE

$61.10

2-4 weeks

Set of 5 racks of 96 tubes 5.0 mm with coded caps with hole

Z168405

$1,722.80

Stock

Set of 5 racks of 96 tubes 3.0 mm with coded caps with hole

Z168406

$1,722.80

Stock

Set of 5 racks of 96 tubes 1.7 mm with coded caps with hole

Z168407

$1,947.50

Stock

Set of 5 racks of 96 tubes 1.0 mm with coded caps with hole

Z168408

$1,947.50

Stock

8 mm Shigemi Advanced microtube set matched with D2O

BMS-008TB

$460.00

2-4 weeks

Compatible with Bruker probes only

8 mm Shigemi Advanced microtube set matched with Chloroform-d

CMS-008TB

$460.00

2-4 weeks

Compatible with Bruker probes only

8 mm Shigemi Advanced microtube set matched with DMSO-d6

DMS-008TB

$485.00

2-4 weeks

Compatible with Bruker probes only

8 mm Shigemi Advanced microtube set matched with Methanol-d4

MMS-008TB

$485.00

2-4 weeks

Compatible with Bruker probes only

5 and 10 mm ETFE Ferrule 1/8"

NE-231-F5

$6.80

3 - 4 weeks

4 mm Blue Caps, Pack of 100

NE-310-4-100
3 - 4 weeks

4 mm Blue Caps, Pack of 1000

NE-310-4-1000
3 - 4 weeks

8 mm Red Caps, Pack of 1000

NE-310-8-100

$18.90

3 - 4 weeks

8 mm Red Caps, Pack of 1000

NE-310-8-1000

$122.60

3 - 4 weeks

6 mm Gel NMR Starter Kit (500 MHz)

NE-373-A-6/4.2
4 - 6 weeks

6 mm Gel NMR Starter Kit (700 MHz)

NE-373-B-6/4.2
4 - 6 weeks

6 mm Gel NMR Starter Kit (900 MHz)

NE-373-C-6/4.2
4 - 6 weeks

5.4 mm Gel NMR Starter Kit (500 MHz)

NE-373-A-5.4/4.2
4 - 6 weeks

5.4 mm Gel NMR Starter Kit (700 MHz)

NE-373-B-5.4/4.2
4 - 6 weeks

5.4 mm Gel NMR Starter Kit (900 MHz)

NE-373-C-5.4/4.2
4 - 6 weeks

5 and 10 mm PPS Washer Nut 1/8"

NE-231-N5

$11.90

3 - 4 weeks

7 mm ZrO2 MAS rotor + ZrO2 cap

H14358

$2,465.10

1-3 weeks

Pack of:
• One 7 mm ZrO₂ rotor
• One 7 mm ZrO₂ drive cap

3.2 mm Thin Wall ZrO2 MAS rotor + open one end, + caps

HZ16916

$2,488.20

1-3 weeks

Pack of
• One 3.2 mm thin wall MAS rotor
• Three SP1 drive caps

5 mm serum stopper, sleeve type, Pack of 100

NE-310-5S

$75.70

3 - 4 weeks

Open Cap for 12, 13, 15, 16, 18 mm Tubes, Pack of 12

TR-OC-07-1
2-4 weeks

Complete Compression Gel Device

NE-375-5

$494.10

4 - 6 weeks

Includes 1 Sample Tube NE-UP5-CGT

10 mm PE Cap Gasket

NE-231-C10

$3.80

3 - 4 weeks

4 mm Shigemi microtube set matched with D2O

BMS-004B

$175.00

Stock

Compatible with Bruker probes only

4 mm Shigemi microtube set matched with D2O

BMS-004J

$175.00

Stock

Compatible with Jeol probes only

4 mm Shigemi microtube set matched with D2O

BMS-004V

$175.00

Stock

Compatible with Varian probes only

4 mm Shigemi microtube set matched with Chloroform-d

CMS-004B

$175.00

2-4 weeks

Compatible with Bruker probes only

4 mm Shigemi microtube set matched with Chloroform-d

CMS-004J

$175.00

2-4 weeks

Compatible with Jeol probes only

4 mm Shigemi microtube set matched with Chloroform-d

CMS-004V

$175.00

2-4 weeks

Compatible with Varian probes only

4 mm Shigemi microtube set matched with DMSO-d6

DMS-004B

$190.00

2-4 weeks

Compatible with Bruker probes only

4 mm Shigemi microtube set matched with DMSO-d6

DMS-004J

$190.00

2-4 weeks

Compatible with Jeol probes only

4 mm Shigemi microtube set matched with DMSO-d6

DMS-004V

$190.00

2-4 weeks

Compatible with Varian probes only

4 mm Shigemi microtube set matched with Methanol-d4

MMS-004B

$190.00

2-4 weeks

Compatible with Bruker probes only

4 mm Shigemi microtube set matched with Methanol-d4

MMS-004J

$190.00

2-4 weeks

Compatible with Jeol probes only

4 mm Shigemi microtube set matched with Methanol-d4

MMS-004V

$190.00

2-4 weeks

Compatible with Varian probes only

8 mm Shigemi microtube set matched with D2O

BMS-008V

$440.00

2-4 weeks

Compatible with Varian probes only

8 mm Shigemi microtube set matched with Chloroform-d

CMS-008V

$440.00

2-4 weeks

Compatible with Varian probes only

8 mm Shigemi microtube set matched with DMSO-d6

DMS-008V

$460.00

2-4 weeks

Compatible with Varian probes only

8 mm Shigemi microtube set matched with Methanol-d4

MMS-008V

$460.00

2-4 weeks

Compatible with Varian probes only

4 mm ZrO2 MAS rotor + Kel-F caps

H14355

$1,052.70

1-3 weeks

Pack of:
• One 4 mm ZrO₂ MAS rotor (H6283)
• Three 4 mm Kel-F drive caps (H6304)

5 mm Caps w/Hole (521-99010153-100)

521-WGS-100
2-4 weeks

Material: Polyethylene

1.3 mm SP1 bottom cap

HZ08194

$264.40

Stock

For use with 1.3 mm MAS rotor

1.3 mm cap remover

HZ14706

$1,359.40

3-6 weeks

Tool for cap removal from 1.3 mm MAS rotor

2.0 mm MATCH™ Gripper

H12182

$253.70

Stock

2.5 mm MATCH™ Gripper

H12183

$253.70

Stock

4.25 mm MATCH™ Gripper

H12186

$295.10

3-6 weeks

3.0 mm MATCH™ Gripper

H9868

$253.70

Stock

4.0 mm MATCH™ Gripper

H9869

$285.80

3-6 weeks

5.0 mm MATCH™ Gripper

H9870

$285.80

3-6 weeks

3 mm POM spinner

Z45665

$425.40

3-6 weeks

5 mm Complete Coaxial System

516-CC-5

$85.70

2-4 weeks

• System includes Inner Insert and Flat Bottom Outer Tube
• Field Compatibility: Up to 600 MHz

1.3 mm ZrO2 MAS rotor + caps

HZ14752

$3,828.00

1-3 weeks

Pack of :
• One 1.3 mm ZrO₂ MAS rotor
• Two 1.3 mm SP1 bottom cap (HZ08194)
• Two 1.3 mm SP1 drive caps (HZ14381)

4 mm ZrO2 MAS rotor + ZrO2 cap

H14356

$2,225.50

1-3 weeks

Pack of:
• One 4 mm ZrO₂ MAS rotor (H6283)
• One 4 mm ZrO₂ drive cap (HZ05951)
• One 4 mm Kel-F drive cap (H6304)

4 mm ZrO2 MAS rotor + Kel-F & SP1 caps

K1910

$1,148.40

1-3 weeks

Pack of:
• One 4 mm ZrO₂ MAS rotor (H6283)
• Two 4 mm Kel-F drive caps (H6304)
• One 4 mm SP1 drive caps (HZ12360)

8 mm Shigemi Advanced microtube set matched with D2O

BMS-008TV

$460.00

2-4 weeks

Compatible with Varian probes only

8 mm Shigemi Advanced microtube set matched with Choroform-d

CMS-008TV

$460.00

2-4 weeks

Compatible with Varian probes only

8 mm Shigemi Advanced microtube set matched with DMSO-d6

DMS-008TV

$485.00

2-4 weeks

Compatible with Varian probes only

8 mm Shigemi Advanced microtube set matched with Methanol-d4

MMS-008TV

$485.00

2-4 weeks

Compatible with Varian probes only

5 mm Finned Vortex Plug

WG-805

$29.20

2-4 weeks

For use with Thin Wall Tubes

3.2 mm sapphire DNP rotor + caps

H13861

$3,969.50

1-3 weeks

Pack of:
• One 3.2 mm sapphire rotor (B6939)
• One 3.2 mm SP1 drive cap (HZ07306)
• Two 3.2 mm ZrO₂ drive caps (HZ12372)

5 mm POM spinner

Z42516

$212.80

Stock

5 mm POM spinner (500 MHz+)

Z42516A

$319.20

Stock

8mm Advanced Microtube Matched with D2O

BMS-008T
2 - 4 weeks

10mm Symmetrical Microtube Matched with D2O

BMS-010
2 - 4 weeks

8mm Advanced Microtube Matched with Chloroform

CMS-008T
2 - 4 weeks

10mm Symmetrical Microtube Matched with Chloroform

CMS-010
2 - 4 weeks

8mm Advanced Microtube Matched with DMSO

DMS-008T
2 - 4 weeks

8mm Advanced Microtube Matched with Methanol

MMS-008T
2 - 4 weeks

10mm Symmetrical Microtube Matched with DMSO

DMS-010
2 - 4 weeks

• For Bruker and Jeol probe
• 10mm Symmetrical Microtube
• Matched with DMSO

50 µL PTFE spacer

H11087

$287.50

3-6 weeks

For use with 4 mm HR-MAS rotor only (HZ07213)

Pack of:
• One 50 µL HR-MAS PTFE insert
• One M2x2 Kel-F thread pin (HZ04800)
• One M2x25 cylindric screw

2.5 mm Thin Wall ZrO2 MAS rotor + caps

HZ15196

$2,105.40

1-3 weeks

Pack of:
• One 2.5 mm Thin Wall ZrO₂ MAS rotor
• Two 2.5 mm SP1 bottom caps for Thin Wall rotor (HZ06694)
• Two 2.5mm SP1 drive caps for Thin Wall rotor (HZ06693)

12 µL Kel-F spacer

H8548

$253.80

3-6 weeks

For use with 4 mm HR-MAS rotor only (HZ05537, HZ05538)

Pack of:
• One 12 µL HR-MAS Kel-F insert
• One M2x2 Kel-F MAS thread pin (HZ04800)
• One M2x25 cylindric screw

Rubber Bulb for Pipets, Pack of 50

NE-301-50

$44.30

3 - 4 weeks

5 mm Black Caps, Pack of 1000

NE-310-5-1000-Black

$129.00

3 - 4 weeks

5 mm Blue Caps, Pack of 1000

NE-310-5-1000-Blue

$129.00

3 - 4 weeks

5 mm Green Caps, Pack of 1000

NE-310-5-1000-Green

$129.00

3 - 4 weeks

5 mm Orange Caps, Pack of 1000

NE-310-5-1000-Orange

$129.00

3 - 4 weeks

5 mm Red Caps, Pack of 1000

NE-310-5-1000-Red

$129.00

3 - 4 weeks

5 mm Violet Caps, Pack of 1000

NE-310-5-1000-Violet

$129.00

3 - 4 weeks

5 mm White Caps, Pack of 1000

NE-310-5-1000-White

$129.00

3 - 4 weeks

5 mm Yellow Caps, Pack of 1000

NE-310-5-1000-Yellow

$129.00

3 - 4 weeks

5 mm Black Caps, Pack of 100

NE-310-5-100-Black

$22.40

3 - 4 weeks

5 mm Blue Caps, Pack of 100

NE-310-5-100-Blue

$22.40

3 - 4 weeks

5 mm Green Caps, Pack of 100

NE-310-5-100-Green

$22.40

3 - 4 weeks

5 mm Orange Caps, Pack of 100

NE-310-5-100-Orange

$22.40

3 - 4 weeks

5 mm Red Caps, Pack of 100

NE-310-5-100-Red

$22.40

3 - 4 weeks

5 mm Violet Caps, Pack of 100

NE-310-5-100-Violet

$22.40

3 - 4 weeks

5 mm White Caps, Pack of 100

NE-310-5-100-White

$22.40

3 - 4 weeks

5 mm Yellow Caps, Pack of 100

NE-310-5-100-Yellow

$22.40

3 - 4 weeks

Latex Bulb for Pipets, Pack of 50

804

$28.40

2-4 weeks

Adapter for 1.7 to 5 mm NMR Capillary

NE-325-5/1.7

$49.20

3 - 4 weeks

7 mm ZrO2 MAS rotor + BN3 and Kel-F caps

K1921

$1,209.60

1-3 weeks

Pack of:
• One 7 mm ZrO₂ MAS rotor
• One 7 mm SP1 drive cap with hole
• One 7 mm Kel-F drive cap without hole
• One 7 mm Kel-F drive cap with hole

4 mm ZrO2 HR-MAS rotor with 12 µL Kel-F spacer + caps

HZ05537

$1,239.70

Stock

Pack of:
• One 4 mm ZrO₂ HR MAS rotor (labeled)
• Three 4 mm Kel-F drive cap (H6304)
• One 4 mm 12 µL Kel-F spacer
• One Kel-F thread pin (HZ04800)
• One M2x25 cylindric screw

5.0 mm SampleJet Shuttle

Z105515

$3,367.40

Stock

Shuttle to hold 5.0 mm tubes for use with SampleJet system

3.0 mm SampleJet Shuttle

Z105909

$3,190.00

Stock

Shuttle to hold 3.0 mm tubes for use with SampleJet system

1.7 mm SampleJet Shuttle

Z106558

$945.20

Stock

Shuttle to hold 1.7 mm tubes for use with SampleJet system

Kel-F thread pin

HZ04800

$33.90

3-6 weeks

For use with 4 mm HR-MAS rotor only (HZ05537, HZ05538, HZ07213) Material : PTFE , Sample Vol.: 12 µL, T° Range: (+10 to +50°C)

5 mm Off-Coil Lock Cell

NE-5-OCL

$39.30

3 - 4 weeks

For use in Thin Wall 5 mm Tubes

PTFE Gel Chamber, 5 mm

NE-372-D-5
4 - 6 weeks

For casting 5 mm gels

PTFE Piston with Buna-N O-Ring, 5 mm

NE-372-C-5
4 - 6 weeks

Fits gel chamber NE-372-D-5

3.2 mm silicone soft plug kit

B7089

$2,474.90

3-6 weeks

Kit contains:
• Ten silicone soft plugs with silica tubing
• One 3.2mm soft plug depth gauge
• One 3.2mm soft plug removal tool

Buna-N O-Ring, 5 mm

NE-372-C-5-O
4 - 6 weeks

FETFE O-ring

NE-250-O
3 - 4 weeks

O-Ring only for NE-250 system

FETFE O-ring

NE-253-O
3 - 4 weeks

O-Ring only for NE-253 system

5 mm Coaxial Inner Cell for Bruker probes

NE-5-CIC

$38.70

Stock

For use in Thin Wall 5 mm Tubes

5 mm Coaxial Inner Cell for Varian probes

NE-5-CIC-V

$38.70

3 - 4 weeks

For use in Thin Wall 5 mm Tubes

Nut And Ferrule

NE-PCAV-FN

$15.50

4 - 6 weeks

For Use with Pressure Valve (PCAV) and Controlled Atmosphere (CAV) Tubes

TFE Plug with knob, O-rings, nut and ferrule

NE-PCAV-P

$110.60

4 - 6 weeks

For Use with Pressure Valve (PCAV) Tubes

Pyrex CAV Glass Adapter

NE-CAV-A

$18.80

4 - 6 weeks

For Use with Controlled Atmosphere Valve (CAV) Tubes

Pyrex PCAV Glass Adapter

NE-CAV-JA

$50.10

4 - 6 weeks

For Use with Controlled Atmosphere Valve (CAV) Tubes

TFE Plug with knob, O-rings, nut and ferrule

NE-CAV-P

$86.20

4 - 6 weeks

For Use with Controlled Atmosphere Valve (CAV) Tubes

Aegis Sealing O-ring

NE-CAV-SO-A

$63.50

4 - 6 weeks

For Use with Controlled Atmosphere Valve (CAV) Tubes

Tool Kit for 50 mL HR-MAS rotor

B2950

$67.10

3-6 weeks

For use with 50 µL HR-MAS rotor only (HZ07213)
Kit contains:
• One extration tool
• One scredriver
• One depth gauge

Brukers set of SFC calibration standards

E1201050

$2,389.10

2-3 weeks

1.9 mm SP1 drive cap

H122284

$348.70

1-3 weeks

For use with 1.9 mm MAS rotor

2.5 mm cap remover for Thin Wall rotor

H13836

$1,722.80

3-6 weeks

Tool for cap removal from 2.5 mm Thin Wall MAS rotor

Cap set tool for 4mm MAS rotor

H148486

$175.50

3-6 weeks

Tools for cap positioning on 4 mm MAS rotors

4 mm sample packer

H148513

$248.20

3-6 weeks

Tool for sample compression into 4 mm MAS rotor

0.7 mm MAS rotor kit

H153268

$5,261.80

1-3 weeks

0.7mm ZrO₂ rotor tested with Vespel caps

Each kit includes:
• One 0.7 mm MAS rotor
• Four 0.7 mm SP1 drive caps
• Four 0.7 mm SP1 bottom caps

7 mm Kel-F insert

H6251

$288.00

3-6 weeks

For moisture sensitive experiments

4 mm ZrO2 MAS rotor

H6283

$542.90

1-3 weeks

4 mm ZrO₂ MAS rotors (no caps included)
For use with 4 mm caps:
• Kel-F drive cap (H6304)
• SP1 drive cap (HZ12360)
• ZrO₂ drive cap (HZ05951)

2.5 mm Regular Wall ZrO2 MAS rotor

HZ05165

$1,313.40

1-3 weeks

For use with 2.5 mm caps for Regular Wall MAS rotors:
• HZ05269 (SP1 drive cap)
• HZ05276 (SP1 bottom cap)

2.5 mm SP1 drive cap for Regular Wall rotor

HZ05269

$341.30

Stock

For use with regular wall 2.5 mm MAS rotors (HZ05165)
Length: 2 mm

2.5 mm SP1 bottom cap for Regular Wall rotor

HZ05276

$233.00

Stock

For use with regular wall 2.5 mm MAS rotors (HZ05165)
Length: 2 mm

2.5 mm cap remover for Regular Wall rotor

HZ05503

$772.80

3-6 weeks

Tool for cap removal from 2.5 mm Regular Wall MAS rotor

2.5 mm filling tool for Regular Wall rotor

HZ05526

$45.90

3-6 weeks

Tool for sample loading into 2.5 mm Regular Wall MAS rotor

2.5 mm sample packer for Regular Wall rotor

HZ05528

$73.30

3-6 weeks

Tool for sample compression into 2.5 mm Regular Wall MAS rotor

4 mm cap remover

HZ05754

$822.40

3-6 weeks

Tool for cap removal from 4 mm MAS rotor

7 mm cap remover

HZ05755

$918.10

3-6 weeks

Tool for cap removal from 7 mm MAS rotor

4 mm ZrO2 drive cap

HZ05951

$1,392.00

Stock

For use with:
• 4 mm ZrO₂ MAS rotor (H6283)
• 4 mm sapphire MAS rotor (H8932)
• 4 mm Si₃N₄ MAS rotors (K1911)

4 mm SP1 cap for High Speed rotor

HZ06427

$373.60

Stock

For use with 4 mm High Speed MAS rotor only. Please refer to item HZ12360 for regular 4mm SP1 cap

2.5 mm SP1 drive cap for Thin Wall rotor

HZ06693

$582.50

1-3 weeks

For use with 2.5 mm Thin Wall MAS rotors (HZ15196)

2.5 mm SP1 bottom cap for Thin Wall rotor

HZ06694

$388.30

1-3 weeks

For use with 2.5 mm Thin Wall MAS rotors (HZ15196)

3.2 mm sample packer for Regular Wall rotor

HZ07607

$163.20

3-6 weeks

Tool for sample compression into 3.2 mm Regular Wall MAS rotor

3.2 mm filling tool for Regular Wall rotor

HZ07608

$46.90

3-6 weeks

Tool for sample loading into 3.2 mm Regular Wall MAS rotor

DISCONTINUED - 3.2 mm Thick Bottom, Regular Wall ZrO2 MAS rotor

HZ09243
1-3 weeks

Individual 3.2 mm Thick Bottom, Regular Wall ZrO₂ MAS rotor (no caps included)
For use with 3.2 mm caps for Regular Wall rotor:
• SP1 drive cap (HZ07306)
• Kel-F drive cap (HZ07308)