Search results for: 'tube nmr 10 mm sample'

Pack of:
• One 7 mm ZrO₂ rotor
• One 7 mm ZrO₂ drive cap

For use with CRAMPS rotor only

For use with CRAMPS rotor only

Pack of:
• One 7 mm ZrO₂ MAS rotor
• One 7 mm SP1 drive cap with hole
• One 7 mm Kel-F drive cap without hole
• One 7 mm Kel-F drive cap with hole

Kit contains:
• Ten silicone soft plugs with silica tubing
• One 3.2mm soft plug depth gauge
• One 3.2mm soft plug removal tool

Pack of:
• One 7 mm ZrO₂ rotor
• Three 7 mm Kel-F drive caps without hole

Pack of:
• One 7 mm ZrO₂ CRAMPS rotor
• Two 7 mm Kel-F drive caps without hole
• One cylindric screw M2x25
• One 7 mm CRAMPS Kel-F spacer

Pack of:
• One 2.5 mm Thin Wall ZrO₂ MAS rotor
• Two 2.5 mm SP1 bottom caps for Thin Wall rotor (HZ06694)
• Two 2.5mm SP1 drive caps for Thin Wall rotor (HZ06693)

For stretch from 5 mm to 4.2 mm

For stretch from 5.4 mm to 4.2 mm

For stretch from 6 mm to 4.2 mm

Includes:
• Piston Driver
• Cap
• Piston
• Gel Chamber
• Funnel

Includes:
• Piston Driver
• Cap
• Piston
• Gel Chamber
• Funnel

Includes:
• Piston Driver
• Cap
• Piston
• Gel Chamber
• Funnel

• O.D.: 2.11 mm
• Length: 12"

• O.D.: 2.01 mm
• Length: 12"

• O.D.: 1.57 mm
• Length: 12"

• O.D.: 1.02 mm
• Length: 12"

• O.D.: 0.79 mm
• Length: 12"

For use with:
• 4 mm ZrO₂ MAS rotor (H6283)
• 4 mm sapphire MAS rotor (H8932)
• 4 mm Si₃N₄ MAS rotors (K1911)

For use with:
• 4 mm ZrO₂ MAS rotor (H6283)
• 4 mm sapphire MAS rotor (H8932)
• 4 mm ZrO₂ HR-MAS rotors (HZ05537, HZ05528, HZ07213)

Tool for cap removal from 4 mm MAS rotor

Tool for cap removal from 7 mm MAS rotor

Tool for cap removal from 1.9 mm MAS rotor

For use with 1.9 mm MAS rotor

For use with 1.9 mm MAS rotor

For use with 0.7 mm MAS rotor

For use with 0.7 mm MAS rotor

0.7mm ZrO₂ rotor tested with Vespel caps

Each kit includes:
• One 0.7 mm MAS rotor
• Four 0.7 mm SP1 drive caps
• Four 0.7 mm SP1 bottom caps

For use with:
• 4 mm MAS rotor (H6283)
• 4 mm HR-MAS rotors (HZ05537, HZ05528, HZ07213)

Pack of:
• One 3.2 mm sapphire rotor (B6939)
• One 3.2 mm SP1 drive cap (HZ07306)
• Two 3.2 mm ZrO₂ drive caps (HZ12372)

Tools for cap positioning on 1.3 mm MAS rotor

Tools for cap positioning on 1.9 mm MAS rotor

For use with 7 mm CRAMPS rotor only

For use with regular wall 2.5 mm MAS rotors (HZ05165)
Length: 2 mm

For use with regular wall 2.5 mm MAS rotors (HZ05165)
Length: 2 mm

Kit contains:
• 3.2 mm cap remover for Thin Wall rotor
• 3.2 mm filling funnel for Thin Wall rotor
• 3.2 mm cap set tool for Thin Wall rotor
• 3.2 mm packer for Thin Wall rotor

For End Gel Plug

For Piston NE-372-C-5.4

For Piston NE-372-C-6

Please consult product number HZ16916 or H12135 as an alternative

For use in Thin Wall 5 mm Tubes

For use with:
• 3.2 mm Regular Wall rotor (HZ09244)
• 3.2 mm sapphire rotor (B6939)

• For 5 mm Screw Thread Tubes
• Septa included

• For 5 mm Screw Thread Tubes
• Cap not included

Tools for cap positioning on 7 mm MAS rotors

• For 5 mm Screw Thread Tubes
• Septa not included

For use with 3.2 mm caps for Regular Wall rotor:
• SP1 drive cap (HZ07306)
• ZrO₂ drive cap (HZ12372)

Fits gel chamber NE-372-D-5

Fits gel chamber NE-372-C-5.4

Fits gel chamber NE-372-D-6

Tool for cap removal from 2.5 mm Thin Wall MAS rotor

Tool for cap removal from 2.5 mm Regular Wall MAS rotor

For use with 2.5 mm Thin Wall MAS rotors (HZ15196)

For use with 2.5 mm Thin Wall MAS rotors (HZ15196)

For use with 3.2 mm Thin Wall MAS rotors (HZ16252)

• For 5 mm Screw Thread Tubes
• Septa included

For use with 3.2 mm Thick Bottom, Regular Wall MAS rotors (HZ09243)

For use with 3.2 mm Thin Wall MAS rotors (HZ16252)

Tool for cap removal for 3.2 mm Regular and Thin Wall MAS rotor

Pack of:
• One 3.2 mm Regular Wall ZrO₂ MAS rotor (HZ09244)
• Three 3.2 mm SP1 drive caps (HZ07306)

For use with 4 mm High Speed MAS rotor only. Please refer to item HZ12360 for regular 4mm SP1 cap

For use with 3.2 mm Thin Wall MAS rotors (HZ16252)
• T° Range: (-30 to +70°C)

Tools for cap positioning on 3.2 mm Regular Wall and Thin Wall MAS rotors

Tools for cap positioning on 2.5 mm Regular Wall and Thin Wall MAS rotors

For use with 3.2 mm caps for Regular Wall rotor:
• SP1 drive cap (HZ07306)
• ZrO₂ drive cap (HZ12372)

Pack of:
• One 3.2mm Thick Bottom, Regular Wall ZrO₂ MAS rotor (HZ09243)
• One 3.2mm SP1 drive cap (HZ07306)
• Two 3.2mm Kel-F drive cap (HZ07308)
• One PTFE spacer (HZ13618)

For use in 5mm thin walled NMR tubes up to 8 inches in length

Coded caps for use with SampleJet system

For use with 4 mm MAS rotor (H6283)

Each set contains:
• 100 Kel-F inserts
• 100 sealing screws
• 100 plugs
• One set of tools (Fork screwdriver, blunt-ended screwdriver, extraction screw)

For use with 4 mm MAS rotor (H6283)

Each set contains:
• 250 Kel-F inserts
• 250 sealing screws
• 250 plugs
• One set of tools (Fork screwdriver, blunt-ended screwdriver, extraction screw)

For moisture sensitive experiments

discontinued, please refer to H6304, HZ12360 or HZ05951 for alternative caps

To secure support rod

For use with Agilent and Jeol Probes

For use with Bruker Probes

For Extraction of End Plug

For all gel chambers

For all gel chambers

O-Ring only for NE-250 system

O-Ring only for NE-253 system

For use with CRAMPS rotor only

• Ideal for storing, freezing and tracking samples
• Sturdy anodized aluminum construction render this rack autoclavable and resistant to commonly used chemicals

Tools for cap positioning on 4 mm MAS rotors

Has been replaced by HZ16913

Coded caps for SampleJet use

• For Bruker and Jeol probe
• 10mm Symmetrical Microtube
• Matched with DMSO

For use with 4 mm HR-MAS rotor only (HZ07213)

Pack of:
• One 50 µL HR-MAS PTFE insert
• One M2x2 Kel-F thread pin (HZ04800)
• One M2x25 cylindric screw

For use with 4 mm HR-MAS rotor only (HZ05537, HZ05538)

Pack of:
• One 12 µL HR-MAS PTFE insert
• One M2x2 Kel-F MAS thread pin (HZ04800)
• One M2x25 cylindric screw

For use with 4 mm HR-MAS rotor only (HZ05537, HZ05538)

Pack of:
• One 12 µL HR-MAS Kel-F insert
• One M2x2 Kel-F MAS thread pin (HZ04800)
• One M2x25 cylindric screw

For Use with Pressure Valve (PCAV) and Controlled Atmosphere (CAV) Tubes

For Use with Pressure Valve (PCAV) Tubes

For Use with Controlled Atmosphere Valve (CAV) Tubes

For Use with Controlled Atmosphere Valve (CAV) Tubes

For Use with Controlled Atmosphere Valve (CAV) Tubes

For Use with Controlled Atmosphere Valve (CAV) Tubes

Contains 50 silicone plugs, 50 FKM plugs and a set of tools

For Use with Pressure Valve (PCAV) and Controlled Atmosphere (CAV) Tubes

For Use with Pressure Valve (PCAV) and Controlled Atmosphere (CAV) Tubes

For Use with Pressure Valve (PCAV) and Controlled Atmosphere (CAV) Tubes

For use with 50 µL HR-MAS rotor only (HZ07213)
Kit contains:
• One extration tool
• One scredriver
• One depth gauge

For use with 4mm HR-MAS rotor only (HZ05537, HZ05538, HZ07213)

For Bruker Probes

For Bruker Late Model Probes

For Bruker Dual Flow Probes

For Varian Probes