Search results for: 'tube nmr 10 mm sample'

Material: Polyethylene

Pack of:
• One 4 mm ZrO₂ HR MAS rotor (labeled)
• Three 4 mm Kel-F drive cap (H6304)
• One 4 mm 12 µL Kel-F spacer
• One Kel-F thread pin (HZ04800)
• One M2x25 cylindric screw

Compatible with Varian probes only

Compatible with Varian probes only

Compatible with Bruker probes only

Compatible with Bruker probes only

Compatible with Jeol probes only

Compatible with Varian probes only

Compatible with Bruker probes only

Compatible with Bruker probes only

Compatible with Jeol probes only

Compatible with Varian probes only

#9 Silicon Joint

Material: Polyethylene

Material: Polyethylene

Material: Polyethylene

Material: Polyethylene

Material: Polyethylene

Material: Polyethylene

Material: Polyethylene

Material: Polyethylene

Material: Polyethylene

Material: Polyethylene

Material: Polyethylene

Material: Polyethylene

Material: Polyethylene

Material: Polyethylene

Material: Polyethylene

Material: Polyethylene

Material: Polyethylene

Material: Polyethylene

Material: Polyethylene

Material: Polyethylene

Material: Polyethylene

Material: Polyethylene

Material: Polyethylene

Material: Polyethylene

• 100 g
• 10% ¹⁵N

• 100 g
• 10% ¹⁵N

• 100 g
• 10% ¹⁵N

• 100 g
• 10% ¹⁵N

• 100 g
• 10% ¹⁵N

• 50 g
• 10% ¹⁵N

Pack of
• One 3.2 mm thin wall MAS rotor
• Three SP1 drive caps

Material: Polyethylene

Material: Polyethylene

Material: Polyethylene

Material: Polyethylene

Material: Polyethylene

For Bruker 10 mm O.D.

• 50 g
• 10% ¹⁵N

• For photochemistry studies
• Suprasil®
• Cutoff wavelength: 190 nm

• For photochemistry studies
• Suprasil®
• Cutoff wavelength: 190 nm

• For photochemistry studies
• Cleared Fused QuartzQ
• Cutoff wavelength: 190 nm

• For photochemistry studies
• Suprasil®
• Cutoff wavelength: 190 nm

Individual 4 mm sapphire rotor (no caps included)
For use with 4 mm caps:
• SP1 drive cap (HZ12360)
• ZrO₂ drive cap (HZ05951)

ISO 29/32 Taper Joint

Pack of:
• One 4 mm ZrO₂ MAS rotor (H6283)
• One 4 mm ZrO₂ drive cap (HZ05951)
• One 4 mm Kel-F drive cap (H6304)

For use with 4 mm HR-MAS rotor only (HZ05537, HZ05538, HZ07213) Material : PTFE , Sample Vol.: 12 µL, T° Range: (+10 to +50°C)

• For 10 mm Screw Thread Tubes
• Cap not included

Shuttle to hold 5.0 mm tubes for use with SampleJet system

Shuttle to hold 3.0 mm tubes for use with SampleJet system

Shuttle to hold 1.7 mm tubes for use with SampleJet system

Shuttle to hold 1.0 mm tubes for use with SampleJet system

4 mm ZrO₂ MAS rotors (no caps included)
For use with 4 mm caps:
• Kel-F drive cap (H6304)
• SP1 drive cap (HZ12360)
• ZrO₂ drive cap (HZ05951)

• For 10 mm Screw Thread Tubes
• Septa not included

Pack of:
• One 4 mm ZrO₂ MAS rotor (H6283)
• Three 4 mm Kel-F drive caps (H6304)

Pack of:
• One 4 mm ZrO₂ MAS rotor (H6283)
• Two 4 mm Kel-F drive caps (H6304)
• One 4 mm SP1 drive caps (HZ12360)

Tool for cap removal from 1.3 mm MAS rotor

• For 10 mm Screw Thread Tubes
• Septa included

For use with 1.3 mm MAS rotor

For use with 1.3 mm MAS rotor

Pack of:
• One 4 mm ZrO₂ CRAMPS rotor
• Two 4 mm Kel-F drive caps
• One M2x25 cylindric screw
• One 4 mm CRAMPS Kel-F spacer

Pack of:
• One 7 mm ZrO₂ rotor
• One 7 mm ZrO₂ drive cap

For use with CRAMPS rotor only

For use with CRAMPS rotor only

Pack of:
• One 7 mm ZrO₂ MAS rotor
• One 7 mm SP1 drive cap with hole
• One 7 mm Kel-F drive cap without hole
• One 7 mm Kel-F drive cap with hole

Kit contains:
• Ten silicone soft plugs with silica tubing
• One 3.2mm soft plug depth gauge
• One 3.2mm soft plug removal tool

Pack of:
• One 7 mm ZrO₂ rotor
• Three 7 mm Kel-F drive caps without hole

Pack of:
• One 7 mm ZrO₂ CRAMPS rotor
• Two 7 mm Kel-F drive caps without hole
• One cylindric screw M2x25
• One 7 mm CRAMPS Kel-F spacer

Pack of:
• One 2.5 mm Thin Wall ZrO₂ MAS rotor
• Two 2.5 mm SP1 bottom caps for Thin Wall rotor (HZ06694)
• Two 2.5mm SP1 drive caps for Thin Wall rotor (HZ06693)

• Packaging: 10 x 0.75 mL
• 99.9% D

For stretch from 5 mm to 4.2 mm

For stretch from 5.4 mm to 4.2 mm

For stretch from 6 mm to 4.2 mm

Includes:
• Piston Driver
• Cap
• Piston
• Gel Chamber
• Funnel

Includes:
• Piston Driver
• Cap
• Piston
• Gel Chamber
• Funnel

Includes:
• Piston Driver
• Cap
• Piston
• Gel Chamber
• Funnel

For All TE102 except JEOL

• O.D.: 2.11 mm
• Length: 12"

• O.D.: 2.01 mm
• Length: 12"

• O.D.: 1.57 mm
• Length: 12"

• O.D.: 1.02 mm
• Length: 12"

• O.D.: 0.79 mm
• Length: 12"

For use with:
• 4 mm ZrO₂ MAS rotor (H6283)
• 4 mm sapphire MAS rotor (H8932)
• 4 mm Si₃N₄ MAS rotors (K1911)

For All TE102 or TE011

For use with:
• 4 mm ZrO₂ MAS rotor (H6283)
• 4 mm sapphire MAS rotor (H8932)
• 4 mm ZrO₂ HR-MAS rotors (HZ05537, HZ05528, HZ07213)

• Packaging: 5 x 10 mL (PTFE faced rubber septum)
• 99.8% D
• Water content: < 0.02%

Tool for cap removal from 4 mm MAS rotor

Tool for cap removal from 7 mm MAS rotor

Tool for cap removal from 1.9 mm MAS rotor

For use with 0.7 mm MAS rotor

For use with 0.7 mm MAS rotor

For use with 1.9 mm MAS rotor

For use with 1.9 mm MAS rotor

• Sterility and Pyrogenicity Tested
• Normalized for deuterium content
• 1 kg

0.7mm ZrO₂ rotor tested with Vespel caps

Each kit includes:
• One 0.7 mm MAS rotor
• Four 0.7 mm SP1 drive caps
• Four 0.7 mm SP1 bottom caps

Quartz EPR capillary

Suprasil® EPR capillary

Suprasil® EPR capillary

Suprasil® EPR capillary

Quartz EPR capillary

Quartz EPR capillary

For use with:
• 4 mm MAS rotor (H6283)
• 4 mm HR-MAS rotors (HZ05537, HZ05528, HZ07213)

Pack of:
• One 3.2 mm sapphire rotor (B6939)
• One 3.2 mm SP1 drive cap (HZ07306)
• Two 3.2 mm ZrO₂ drive caps (HZ12372)

Tools for cap positioning on 1.3 mm MAS rotor

Tools for cap positioning on 1.9 mm MAS rotor

For use with 7 mm CRAMPS rotor only

For use with regular wall 2.5 mm MAS rotors (HZ05165)
Length: 2 mm

For use with regular wall 2.5 mm MAS rotors (HZ05165)
Length: 2 mm

Kit contains:
• 3.2 mm cap remover for Thin Wall rotor
• 3.2 mm filling funnel for Thin Wall rotor
• 3.2 mm cap set tool for Thin Wall rotor
• 3.2 mm packer for Thin Wall rotor

99% ¹³C

For End Gel Plug

For Piston NE-372-C-5.4

For Piston NE-372-C-6

Please consult product number HZ16916 or H12135 as an alternative

For use in Thin Wall 5 mm Tubes

• Packaging: 5 x 10 mL
• 99.8% D
• Contains 0.03% TMS (v/v)
• Water content: < 0.02%

For use with:
• 3.2 mm Regular Wall rotor (HZ09244)
• 3.2 mm sapphire rotor (B6939)

• For 5 mm Screw Thread Tubes
• Septa included

• For 5 mm Screw Thread Tubes
• Cap not included

Tools for cap positioning on 7 mm MAS rotors

• For 5 mm Screw Thread Tubes
• Septa not included

For use with 3.2 mm caps for Regular Wall rotor:
• SP1 drive cap (HZ07306)
• ZrO₂ drive cap (HZ12372)

Fits gel chamber NE-372-D-5

Fits gel chamber NE-372-C-5.4

Fits gel chamber NE-372-D-6

Tool for cap removal from 2.5 mm Thin Wall MAS rotor

Tool for cap removal from 2.5 mm Regular Wall MAS rotor

For use with 2.5 mm Thin Wall MAS rotors (HZ15196)

For use with 2.5 mm Thin Wall MAS rotors (HZ15196)

For use with 3.2 mm Thin Wall MAS rotors (HZ16252)

• For 5 mm Screw Thread Tubes
• Septa included

For use with 3.2 mm Thick Bottom, Regular Wall MAS rotors (HZ09243)

For use with:
• 3.2 mm Regular Wall MAS rotors (HZ09244)
• 3.2 mm sapphire rotor (B6939)
• T° Range: (-30 to +70°C)

For use with 3.2 mm Thin Wall MAS rotors (HZ16252)

For All TE102 except JEOL

Tool for cap removal for 3.2 mm Regular and Thin Wall MAS rotor

Pack of:
• One 3.2 mm Regular Wall ZrO₂ MAS rotor (HZ09244)
• Three 3.2 mm SP1 drive caps (HZ07306)

For use with 4 mm High Speed MAS rotor only. Please refer to item HZ12360 for regular 4mm SP1 cap

For use with 3.2 mm Thin Wall MAS rotors (HZ16252)
• T° Range: (-30 to +70°C)