Search results for: 'teflon shape for 5 mm nmr tubes'

4 mm ZrO2 HR-MAS rotor with 12 µL PTFE spacer + caps

HZ05538

$1,273.20

Stock

Pack of:
• One 4 mm ZrO₂ HR MAS rotor (labeled)
• Three 4 mm Kel-F drive cap (H6304)
• One 4 mm 12 µL PTFE spacer
• One Kel-F thread pin (HZ04800)
• One M2x25 cylindric screw

4 mm ZrO2 HR-MAS rotor with 50 µL PTFE spacer + caps

HZ07213

$1,239.70

Stock

Pack of:
• One 4 mm ZrO₂ HR MAS rotor (labeled)
• Three 4 mm Kel-F drive cap (H6304)
• One 4 mm 50 µL PTFE spacer
• One Kel-F thread pin (HZ04800)
• One M2x25 cylindric screw

DISCONTINUED - 3.2 mm Thick Bottom, Regular Wall ZrO2 MAS rotor

HZ09243
1-3 weeks

Individual 3.2 mm Thick Bottom, Regular Wall ZrO₂ MAS rotor (no caps included)
For use with 3.2 mm caps for Regular Wall rotor:
• SP1 drive cap (HZ07306)
• Kel-F drive cap (HZ07308)

Buna-N O-Ring, 5 mm

NE-372-C-5-O
4 - 6 weeks

2.5 mm Shigemi microtube set matched with Chloroform-d

CMS-0025

$205.00

2-4 weeks

Compatible with Bruker probes only

3 mm Shigemi microtube set matched with Chloroform-d

CMS-003

$175.00

2-4 weeks

Compatible with all manufacturers probes

2.5 mm Shigemi microtube set matched with DMSO-d6

DMS-0025

$205.00

2-4 weeks

Compatible with Bruker probes only

3 mm Shigemi microtube set matched with DMSO-d6

DMS-003

$190.00

2-4 weeks

Compatible with all manufacturers probes

4 mm ZrO2 HR-MAS rotor with 12 µL Kel-F spacer + caps

HZ05537

$1,239.70

Stock

Pack of:
• One 4 mm ZrO₂ HR MAS rotor (labeled)
• Three 4 mm Kel-F drive cap (H6304)
• One 4 mm 12 µL Kel-F spacer
• One Kel-F thread pin (HZ04800)
• One M2x25 cylindric screw

Buna-N O-Ring, 5 mm

NE-370-A-5-O
4 - 6 weeks

For End Gel Plug

2.5 mm SP1 drive cap for Regular Wall rotor

HZ05269

$341.30

Stock

For use with regular wall 2.5 mm MAS rotors (HZ05165)
Length: 2 mm

2.5 mm SP1 bottom cap for Regular Wall rotor

HZ05276

$233.00

Stock

For use with regular wall 2.5 mm MAS rotors (HZ05165)
Length: 2 mm

NMR/EPR Pipets 13-1/4'' O.A.L., long-tip for 3mm, 5mm or larger OD

803A

$139.50

2-4 weeks

1 mm NMR capillaries 100 mm with PTFE Protective Sleeve, Pack of 10

NE-263-1-PS

$111.40

3 - 4 weeks

15 mm PTFE/Silicone Septa, Pack of 12

NE-3215
3 - 4 weeks

• For 10 mm Screw Thread Tubes
• Cap not included

2 mm NMR capillaries 75 mm, Pack of 10

NE-262-2

$76.10

3 - 4 weeks

For use with Microtubes

2 mm Red Caps, Pack of 25

521-T

$9.90

2-4 weeks

Material: Polyethylene

15 mm Open Top Thread Cap, Pack of 12

NE-3015
3 - 4 weeks

• For 10 mm Screw Thread Tubes
• Septa not included

4 mm ZrO2 drive cap

HZ05951

$1,392.00

Stock

For use with:
• 4 mm ZrO₂ MAS rotor (H6283)
• 4 mm sapphire MAS rotor (H8932)
• 4 mm Si₃N₄ MAS rotors (K1911)

3 mm Red Caps, Pack of 100

521-P-100

$13.40

2-4 weeks

Material: Polyethylene

8 mm Shigemi Advanced microtube set matched with D2O

BMS-008TB

$460.00

2-4 weeks

Compatible with Bruker probes only

8 mm Shigemi Advanced microtube set matched with D2O

BMS-008TV

$460.00

2-4 weeks

Compatible with Varian probes only

3.2 mm Thin Wall ZrO2 MAS rotor + open one end, + caps

HZ16916

$2,488.20

1-3 weeks

Pack of
• One 3.2 mm thin wall MAS rotor
• Three SP1 drive caps

10 mm Green Caps, Pack of 100

521-C-GRN-100

$12.90

2-4 weeks

Material: Polyethylene

4 mm SP1 drive cap

HZ12360

$239.30

1-3 weeks

For use with:
• 4 mm ZrO₂ MAS rotor (H6283)
• 4 mm sapphire MAS rotor (H8932)
• 4 mm ZrO₂ HR-MAS rotors (HZ05537, HZ05528, HZ07213)

8 mm Shigemi Advanced microtube set matched with Chloroform-d

CMS-008TB

$460.00

2-4 weeks

Compatible with Bruker probes only

8 mm Shigemi Advanced microtube set matched with Choroform-d

CMS-008TV

$460.00

2-4 weeks

Compatible with Varian probes only

8 mm Shigemi Advanced microtube set matched with DMSO-d6

DMS-008TB

$485.00

2-4 weeks

Compatible with Bruker probes only

8 mm Shigemi Advanced microtube set matched with DMSO-d6

DMS-008TV

$485.00

2-4 weeks

Compatible with Varian probes only

15 mm Solid Top Thread Cap With Rubber Liner, Pack of 12

NE-3115
3 - 4 weeks

• For 10 mm Screw Thread Tubes
• Septa included

4 mm sample packer

H148513

$248.20

3-6 weeks

Tool for sample compression into 4 mm MAS rotor

7 mm sample packer

H148514

$235.80

3-6 weeks

Tool for sample compression into 7 mm MAS rotor

4 mm cap remover

HZ05754

$822.40

3-6 weeks

Tool for cap removal from 4 mm MAS rotor

7 mm cap remover

HZ05755

$918.10

3-6 weeks

Tool for cap removal from 7 mm MAS rotor

7 mm filling tool

HZ3328

$67.30

3-6 weeks

Tool for sample loading into 7 mm MAS rotor

4 mm filling tool

HZ3329

$175.50

3-6 weeks

Tool for sample loading into 4 mm MAS rotor

2.5 mm MATCH™ Gripper

H12183

$253.70

Stock

5.0 mm MATCH™ Gripper

H9870

$285.80

3-6 weeks

1.3 mm cap remover

HZ14706

$1,359.40

3-6 weeks

Tool for cap removal from 1.3 mm MAS rotor

1.3 mm filling tool

HZ14714

$94.60

3-6 weeks

Tool for sample loading into 1.3 mm MAS rotor

1.3 mm sample packer

HZ14716

$134.80

3-6 weeks

Tool for sample compression into 1.3 mm MAS rotor

1.9 mm filling tool

HZ16845

$80.80

2-3 weeks

Tool for sample loading into 1.9 mm MAS rotor

1.9 mm sample packer

HZ16850

$228.70

In Stock

Tool for sample compression into 1.9 mm MAS rotor

1.9 mm cap remover

HZ16858

$1,263.70

2-3 weeks

Tool for cap removal from 1.9 mm MAS rotor

1.9 mm SP1 drive cap

H122284

$348.70

1-3 weeks

For use with 1.9 mm MAS rotor

1.3 mm SP1 bottom cap

HZ08194

$264.40

Stock

For use with 1.3 mm MAS rotor

1.3 mm SP1 drive cap

HZ14381

$368.50

Stock

For use with 1.3 mm MAS rotor

1.9 mm SP1 bottom cap

HZ16789

$316.40

1-3 weeks

For use with 1.9 mm MAS rotor

SP1 drive caps 0.7 mm

H141690

$385.50

2-3 weeks

For use with 0.7 mm MAS rotor

0.7 mm SP1 bottom cap

H139022

$353.70

2-3 weeks

For use with 0.7 mm MAS rotor

0.7 mm MAS rotor kit

H153268

$5,261.80

1-3 weeks

0.7mm ZrO₂ rotor tested with Vespel caps

Each kit includes:
• One 0.7 mm MAS rotor
• Four 0.7 mm SP1 drive caps
• Four 0.7 mm SP1 bottom caps

2.5 mm cap remover for Thin Wall rotor

H13836

$1,722.80

3-6 weeks

Tool for cap removal from 2.5 mm Thin Wall MAS rotor

2.5 mm cap remover for Regular Wall rotor

HZ05503

$772.80

3-6 weeks

Tool for cap removal from 2.5 mm Regular Wall MAS rotor

2.5 mm filling tool for Regular Wall rotor

HZ05526

$45.90

3-6 weeks

Tool for sample loading into 2.5 mm Regular Wall MAS rotor

2.5 mm sample packer for Regular Wall rotor

HZ05528

$73.30

3-6 weeks

Tool for sample compression into 2.5 mm Regular Wall MAS rotor

2.5 mm sample packer for Thin Wall rotor

HZ15198

$172.00

3-6 weeks

Tool for sample compression into 2.5 mm Thin Wall MAS rotor

2.5 mm filling tool for Thin Wall rotor

HZ15199

$48.90

3-6 weeks

Tool for sample loading into 2.5 mm Thin Wall MAS rotor

2.5 mm SP1 drive cap for Thin Wall rotor

HZ06693

$582.50

1-3 weeks

For use with 2.5 mm Thin Wall MAS rotors (HZ15196)

2.5 mm SP1 bottom cap for Thin Wall rotor

HZ06694

$388.30

1-3 weeks

For use with 2.5 mm Thin Wall MAS rotors (HZ15196)

3 mm Kel-F Positioning Rod

529-C

$51.90

2-4 weeks

4 mm Kel-F drive cap

H6304

$124.10

1-3 weeks

For use with:
• 4 mm MAS rotor (H6283)
• 4 mm HR-MAS rotors (HZ05537, HZ05528, HZ07213)

3.2 mm sapphire DNP rotor + caps

H13861

$3,969.50

1-3 weeks

Pack of:
• One 3.2 mm sapphire rotor (B6939)
• One 3.2 mm SP1 drive cap (HZ07306)
• Two 3.2 mm ZrO₂ drive caps (HZ12372)

1.3 mm cap set tool

HZ14744

$326.20

3-6 weeks

Tools for cap positioning on 1.3 mm MAS rotor

1.9 mm cap set tool

HZ16855

$131.30

2-3 weeks

Tools for cap positioning on 1.9 mm MAS rotor

PTFE -FEP Tube and 10 mm O.D. Glass Adapter; Both Ends Open

PTFE-10MM-KIT

$129.80

2-4 weeks

7 mm CRAMPS Kel-F spacer

H6250

$68.40

3-6 weeks

For use with 7 mm CRAMPS rotor only

PTFE Gel Chamber, 6 mm

NE-372-D-6
4 - 6 weeks

For casting 6 mm gels

Tool Kit for 3.2 mm Thin Wall rotor

B136904

$1,190.50

Stock

Kit contains:
• 3.2 mm cap remover for Thin Wall rotor
• 3.2 mm filling funnel for Thin Wall rotor
• 3.2 mm cap set tool for Thin Wall rotor
• 3.2 mm packer for Thin Wall rotor

3.2 mm ZrO2 drive cap for Regular Wall rotor

HZ12372

$1,680.10

Delivery time to be confirmed

For use with:
• 3.2 mm Regular Wall rotor (HZ09244)
• 3.2 mm sapphire rotor (B6939)

PTFE/Silicone Rubber Septum for 4 and 5 mm Tubes, Pack of 36

TR-LS-01

$22.00

2-4 weeks

Cap set tool for 7 mm MAS rotor

H148487

$124.10

2-3 weeks

Tools for cap positioning on 7 mm MAS rotors

2.5 mm cap set tool for Regular and Thin Wall rotors

HZ16624

$101.10

3-6 weeks

Tools for cap positioning on 2.5 mm Regular Wall and Thin Wall MAS rotors

1.1 mm Quartz EPR Capillary, Pack of 25

Q-.9X1.1

$240.70

2-4 weeks

Quartz EPR capillary

2.4 mm Suprasil EPR Capillary, Pack of 25

S-2-0X2.4
2-4 weeks

Suprasil® EPR capillary

1.2 mm Quartz EPR Capillary, Pack of 25

Q-1.0X1.2

$244.80

2-4 weeks

Quartz EPR capillary

1.8 mm Quartz EPR Capillary, Pack of 25

Q-1.5X1.8

$236.10

2-4 weeks

Quartz EPR capillary

1.2 mm Suprasil EPR Capillary, Pack of 25

S-1-0X1.2
2-4 weeks

Suprasil® EPR capillary

1.8 mm Suprasil EPR Capillary, Pack of 25

S-1-5X1.8
2-4 weeks

Suprasil® EPR capillary

2.5 mm SP1 drive cap for Regular Wall rotor (long stem)

HZ12600

$186.30

2-3 weeks

For use with regular wall 2.5 mm MAS rotors (HZ05165)
Sample Volume: about 8 µL

3.2 mm sapphire rotor

HZ14471

$1,920.30

1-3 weeks

For use with 3.2 mm caps for Regular Wall rotor:
• SP1 drive cap (HZ07306)
• ZrO₂ drive cap (HZ12372)

3.2 mm sample packer for Regular Wall rotor

HZ07607

$163.20

3-6 weeks

Tool for sample compression into 3.2 mm Regular Wall MAS rotor

3.2 mm filling tool for Regular Wall rotor

HZ07608

$46.90

3-6 weeks

Tool for sample loading into 3.2 mm Regular Wall MAS rotor

Set of 10 Kel-F inserts for 4 mm MAS rotor

B4493

$373.70

1 - 3 weeks

For use with 4 mm MAS rotor (H6283)

Each set contains:
• Ten Kel-F inserts
• Ten sealing screws
• Ten plugs
• One set of tools (Fork screwdriver, blunt-ended screwdriver, extraction screw)

3.2 mm SP1 drive cap for Thin Wall rotor

HZ16253

$343.90

1-3 weeks

For use with 3.2 mm Thin Wall MAS rotors (HZ16252)

3.2 mm sample packer/unpacker

B6988

$1,293.10

3-6 weeks

3.2 mm PTFE Insert for Regular Wall rotor

HZ13618

$56.00

3-6 weeks

For use with 3.2 mm Thick Bottom, Regular Wall MAS rotors (HZ09243)

1.7 mm MATCH™ Gripper

H12181

$490.80

Stock

2.0 mm MATCH™ Gripper

H12182

$253.70

Stock

4.25 mm MATCH™ Gripper

H12186

$295.10

3-6 weeks

1.0 mm MATCH™ Gripper

H12198

$281.00

Stock

3.0 mm MATCH™ Gripper

H9868

$253.70

Stock

4.0 mm MATCH™ Gripper

H9869

$285.80

3-6 weeks

TE102 Standard Aqueous Cell Spectroscopic Quality

WG-812-Q

$898.70

2-4 weeks

For All TE102 except JEOL

PTFE Funnel

NE-372-E-5.4
4 - 6 weeks

For stretch from 5.4 mm to 4.2 mm

3.2 mm Kel-F drive cap for Thin Wall rotor

HZ16908

$294.50

1-3 weeks

For use with 3.2 mm Thin Wall MAS rotors (HZ16252)

3.2 mm Regular and Thin Wall rotor cap remover

HZ16913

$1,109.50

2-3 weeks

Tool for cap removal for 3.2 mm Regular and Thin Wall MAS rotor

PTFE Needle

90615

$59.10

2-4 weeks

• O.D.: 2.11 mm
• Length: 12"

PTFE Needle

90616

$51.80

2-4 weeks

• O.D.: 2.01 mm
• Length: 12"

PTFE Needle

90619

$51.80

2-4 weeks

• O.D.: 1.57 mm
• Length: 12"

PTFE Needle

90624

$62.80

2-4 weeks

• O.D.: 1.02 mm
• Length: 12"

PTFE Needle

90630

$61.50

2-4 weeks

• O.D.: 0.79 mm
• Length: 12"

Complete Gel Press System, 5.4 mm

NE-372-5.4/4.2
4 - 6 weeks

Includes:
• Piston Driver
• Cap
• Piston
• Gel Chamber
• Funnel

Discontinued - Please consult product number HZ16916 as an alternative

H12135
1-3 weeks

Pack of:
• One 3.2 mm Regular Wall ZrO₂ MAS rotor (HZ09244)
• Three 3.2 mm SP1 drive caps (HZ07306)

O-ring for 3 mm spinner, set of 10

Z121714

$32.20

3-6 weeks

4 mm SP1 cap for High Speed rotor

HZ06427

$373.60

Stock

For use with 4 mm High Speed MAS rotor only. Please refer to item HZ12360 for regular 4mm SP1 cap

3.2 mm SP1 bottom cap for Thin Wall rotor

HZ16254

$318.40

3-6 weeks

For use with 3.2 mm Thin Wall MAS rotors (HZ16252)
• T° Range: (-30 to +70°C)

5 mm Positioning and Extraction Rod

NE-341-5

$27.20

3 -4 weeks

3.2 mm cap set tool for Regular and Thin Wall rotors

HZ16621

$65.70

3-6 weeks

Tools for cap positioning on 3.2 mm Regular Wall and Thin Wall MAS rotors

5 mm Black Caps, Pack of 1000

NE-310-5-1000-Black

$129.00

3 - 4 weeks

5 mm Blue Caps, Pack of 1000

NE-310-5-1000-Blue

$129.00

3 - 4 weeks

5 mm Green Caps, Pack of 1000

NE-310-5-1000-Green

$129.00

3 - 4 weeks

5 mm Orange Caps, Pack of 1000

NE-310-5-1000-Orange

$129.00

3 - 4 weeks

5 mm Red Caps, Pack of 1000

NE-310-5-1000-Red

$129.00

3 - 4 weeks

5 mm Violet Caps, Pack of 1000

NE-310-5-1000-Violet

$129.00

3 - 4 weeks

5 mm White Caps, Pack of 1000

NE-310-5-1000-White

$129.00

3 - 4 weeks

5 mm Yellow Caps, Pack of 1000

NE-310-5-1000-Yellow

$129.00

3 - 4 weeks

5 mm Black Caps, Pack of 100

NE-310-5-100-Black

$22.40

3 - 4 weeks

5 mm Blue Caps, Pack of 100

NE-310-5-100-Blue

$22.40

3 - 4 weeks

5 mm Green Caps, Pack of 100

NE-310-5-100-Green

$22.40

3 - 4 weeks

5 mm Orange Caps, Pack of 100

NE-310-5-100-Orange

$22.40

3 - 4 weeks

5 mm Red Caps, Pack of 100

NE-310-5-100-Red

$22.40

3 - 4 weeks

5 mm Violet Caps, Pack of 100

NE-310-5-100-Violet

$22.40

3 - 4 weeks

5 mm White Caps, Pack of 100

NE-310-5-100-White

$22.40

3 - 4 weeks

5 mm Yellow Caps, Pack of 100

NE-310-5-100-Yellow

$22.40

3 - 4 weeks

DISCONTINUED (replaced by HZ14471) - 3.2 mm sapphire rotor

B6939
1-3 weeks

For use with 3.2 mm caps for Regular Wall rotor:
• SP1 drive cap (HZ07306)
• ZrO₂ drive cap (HZ12372)

Complete Compression Gel Device

NE-375-5

$494.10

4 - 6 weeks

Includes 1 Sample Tube NE-UP5-CGT

PTFE Holder

529-B

$74.90

2-4 weeks

3.2 mm silicone soft plug kit

B7089

$2,474.90

3-6 weeks

Kit contains:
• Ten silicone soft plugs with silica tubing
• One 3.2mm soft plug depth gauge
• One 3.2mm soft plug removal tool

3.2 mm Thick Bottom, Regular Wall ZrO2 MAS rotor + caps + PTFE spacer

HZ13706

$1,852.90

1-3 weeks

Pack of:
• One 3.2mm Thick Bottom, Regular Wall ZrO₂ MAS rotor (HZ09243)
• One 3.2mm SP1 drive cap (HZ07306)
• Two 3.2mm Kel-F drive cap (HZ07308)
• One PTFE spacer (HZ13618)

5 mm PE Cap Gasket

NE-231-C5

$3.10

3 - 4 weeks

POM balls, Transparent White (Pack of 100)

Z72497

$49.10

3-6 weeks

10 mm Coaxial Inner Cell for Bruker probes

NE-10-CIC

$56.80

3 - 4 weeks

POM balls, Pastel Orange (Pack of 100)

Z147552

$37.20

2-3 weeks

POM balls, Azure Blue (Pack of 100)

Z147553

$37.20

2-3 weeks

POM balls, Traffic Red (Pack of 100)

Z147554

$44.30

2-3 weeks

POM balls, Zinc Yellow (Pack of 100)

Z147555

$37.20

2-3 weeks

10 mm Coaxial Inner Cell for Varian probes

NE-10-CIC-V

$56.80

3 - 4 weeks

3 - 4 weeks

5 and 10 mm PEEK Solvent Capillary 1/8"

NE-231-S5

$42.10

3 - 4 weeks

Buna-N O-Ring, 5.4 mm

NE-372-C-5.4-O
4 - 6 weeks

For Piston NE-372-C-5.4

PTFE/Silicone Rubber Septum for 10 mm Tubes, Pack of 36

TR-LS-05

$69.30

2-4 weeks

Sample position gauge Standard Bore, new model

Z119229

$904.00

2-3 weeks

DISCONTINUTED - Sample position gauge, Standard Bore

Z3914

$1,215.10

3-6 weeks

Has been replaced by Z119229

Sample position gauge, Wide Bore

Z3915

$1,865.60

3-6 weeks

PTFE Piston with Buna-N O-Ring, 5.4 mm

NE-372-C-5.4
4 - 6 weeks

Fits gel chamber NE-372-C-5.4

10 mm ceramic spinner

H00805

$951.80

3-6 weeks

3 mm POM spinner

Z45665

$425.40

3-6 weeks

3 mm PEEK spinner

Z48130

$996.90

3-6 weeks

3 mm ceramic spinner

Z49727

$1,321.40

3-6 weeks

10 mm POM spinner

Z5293

$212.80

Stock

1 mm POM spinner

Z70973

$277.50

3-6 weeks

3 and 5 mm Washer Glass Body

NE-231-G

$22.90

3 - 4 weeks

7 mm Kel-F insert

H6251

$288.00

3-6 weeks

For moisture sensitive experiments

4 mm CRAMPS PTFE spacer

HZ1872

$66.70

3-6 weeks

For use with CRAMPS rotor only

4 mm CRAMPS PE spacer

HZ2245

$76.50

3-6 weeks

For use with CRAMPS rotor only

7 mm ZrO2 drive cap

HZ2717

$1,310.40

3-6 weeks

4 mm Macor drive cap

K1935

$239.00

discontinued, please refer to H6304, HZ12360 or HZ05951 for alternative caps

DISCONTINUED 3.2 mm Thin Wall ZrO2 MAS rotor, open on both ends + caps

H163649
1-3 weeks

Please consult product number HZ16916 or H12135 as an alternative

TE102 Standard Aqueous Cell Spectroscopic Quality

WG-812-S-Q

$2,403.40

2-4 weeks

For All TE102 except JEOL

50 mL Suprasil Nitrogen Dewar Flask

WG-816-B-Q

$1,122.90

2-4 weeks

For Bruker 10 mm O.D.

50 mL Suprasil Nitrogen Dewar Flask

WG-816-D-Q

$1,370.50

2-4 weeks

For Bruker 8 mm O.D.

10 mm Kel-F spinner

H00306

$377.30

3-6 weeks

3 mm Kel-F spinner

Z45666

$829.60

2-3 weeks

4 mm CRAMPS Kel-F spacer

HZ2405

$72.60

3-6 weeks

For use with CRAMPS rotor only

10 mm Glass Sleeve

NE-205-10

$37.20

4 - 6 weeks

Open Cap for 12, 13, 15, 16, 18 mm Tubes, Pack of 12

TR-OC-07-1
2-4 weeks

5 and 10 mm ETFE Ferrule 1/8"

NE-231-F5

$6.80

3 - 4 weeks

7 mm ZrO2 rotor for laser heating

H128297

$3,440.50

1-3 weeks

7 mm BN3 drive cap with hole

HZ1651

$156.60

Stock

3.2 mm soft plug removal tool

B7005

$2,007.00

3-6 weeks

3.2 mm soft plug depth gauge

B7006

$601.60

3-6 weeks

Tool Kit for 0.7 mm MAS rotor

H149435

$24,253.00

2-3 weeks

Includes :
• Cap Removal Tool
• Filling Tool
• Sample Packer
• Cap Set Tool
• Tool Insert

5 and 10 mm PPS Washer Nut 1/8"

NE-231-N5

$11.90

3 - 4 weeks

10 mm Kel-F spinner, Wide Bore

H00809

$1,153.10

3-6 weeks

7 mm Kel-F drive cap with hole

H6244

$169.80

3-6 weeks

7 mm Kel-F drive cap without hole

HZ1662

$129.30

Stock

W Band Suprasil EPR Tube both ends open, 40 mm, Pack of 10

WG-213ST9S

$244.80

2-4 weeks

• For photochemistry studies
• Suprasil®
• Cutoff wavelength: 190 nm

W Band Suprasil EPR Tube one end sealed, 40 mm, Pack of 10

WG-213ST9S-RB

$305.00

2-4 weeks

• For photochemistry studies
• Suprasil®
• Cutoff wavelength: 190 nm

Q Band CFQ EPR Tube one end sealed, 100 mm, Pack of 10

WG-221T-RB

$227.30

2-4 weeks

• For photochemistry studies
• Cleared Fused QuartzQ
• Cutoff wavelength: 190 nm

Q Band Suprasil EPR Tube one end sealed, 100 mm, Pack of 10

WG-222T-RB

$323.60

2-4 weeks

• For photochemistry studies
• Suprasil®
• Cutoff wavelength: 190 nm

TE102 Low Temperature Aqueous Cell Suprasil

WG-808-Q

$988.80

2-4 weeks

For All TE102 or TE011

Buna-N O-Ring, 6 mm

NE-372-C-6-O
4 - 6 weeks

For Piston NE-372-C-6

Cap set tool for 4mm MAS rotor

H148486

$175.50

3-6 weeks

Tools for cap positioning on 4 mm MAS rotors

3 - 4 weeks

10 mm Red Caps, Pack of 100

NE-310-10-1000

$161.70

3 - 4 weeks

3 mm Red Caps, Pack of 100

NE-310-3-100

$17.60

Stock

3 mm Red Caps, Pack of 1000

NE-310-3-1000

$111.50

Stock

3 - 4 weeks