Search results for: 'standard glycine sample fo sulfid solut nmr'

• For Precision Tube Only
• Material: PTFE

• For Precision Tube Only
• Material: PTFE

For Use with Pressure Valve (PCAV) and Controlled Atmosphere (CAV) Tubes

For use in 5mm thin walled NMR tubes up to 8 inches in length

For Use with Pressure Valve (PCAV) and Controlled Atmosphere (CAV) Tubes

For Use with Pressure Valve (PCAV) and Controlled Atmosphere (CAV) Tubes

• Precision EPR tube
• Omni-Fit tube only
• 8" long
•

For All TE102 or TE011

• Precision EPR tube
• Quick Pressure Valve
• Thin Wall
• 8" long

• Precision EPR tube
• Quick Pressure Valve
• Thin Wall
• 8" long

For use in Thin Wall 5 mm Tubes

For use in Thin Wall 5 mm Tubes

For use with Thin Wall Tubes

• O.D.: 2.11 mm
• Length: 12"

• O.D.: 2.01 mm
• Length: 12"

• O.D.: 1.57 mm
• Length: 12"

• O.D.: 1.02 mm
• Length: 12"

• O.D.: 0.79 mm
• Length: 12"

• Precision Quartz EPR tube
• Screw-Cap
• Thin Wall
• 7" long

• Precision Quartz EPR tube
• Screw-Cap
• Thin Wall
• 7" long

• For photochemistry studies
• Suprasil®
• Cutoff wavelength: 190 nm

• For photochemistry studies
• Suprasil®
• Cutoff wavelength: 190 nm

• For photochemistry studies
• Cleared Fused QuartzQ
• Cutoff wavelength: 190 nm

• For photochemistry studies
• Suprasil®
• Cutoff wavelength: 190 nm

• SRC Homology 3 domain (SH3)
• Number of residues: 62
• Protein size: 5.6 kDa
• Labeling: ¹³C, ¹⁵N

• SRC Homology 3 domain (SH3)
• Number of residues: 62
• Protein size: 5.6 kDa
• Labeling: ¹³C, ¹⁵N, D

• B-1 Immunoglobulin G Binding Domain (GB1)
• Residues 303-357 of the protein G, with T303Q mutation
• Size: 6.2 kDa
• Labeling: ¹³C, ¹⁵N

• Full length Ubiquitin (Residue 1-76)
• Protein size: 6.8 kDa
• Labeling: ¹³C, ¹⁵N, D

• B-1 Immunoglobulin G Binding Domain (GB1)
• Residues 303-357 of the protein G, with T303Q mutation
• Size: 6.2 kDa
• Labeling: ¹³C, ¹⁵N

• Full length Ubiquitin (Residue 1-76)
• Protein size: 6.8 kDa
• Labeling: ¹³C, ¹⁵N

O-Ring only for NE-250 system

O-Ring only for NE-253 system

• SRC Homology 3 domain (SH3)
• Number of residues: 62
• Protein size: 5.6 kDa
• Labeling: ¹³C, ¹⁵N

• SRC Homology 3 domain (SH3)
• Number of residues: 62
• Protein size: 5.6 kDa
• Labeling: ¹³C, ¹⁵N, D

• B-1 Immunoglobulin G Binding Domain (GB1)
• Residues 303-357 of the protein G, with T303Q mutation
• Size: 6.2 kDa
• Labeling: ¹³C, ¹⁵N

• Full length Ubiquitin (Residue 1-76)
• Protein size: 6.8 kDa
• Labeling: ¹³C, ¹⁵N, D

• B-1 Immunoglobulin G Binding Domain (GB1)
• Residues 303-357 of the protein G, with T303Q mutation
• Size: 6.2 kDa
• Labeling: ¹³C, ¹⁵N, D

• Full length Ubiquitin (Residue 1-76)
• Protein size: 6.8 kDa
• Labeling: ¹³C, ¹⁵N

• 5 mg
• SRC Homology 3 domain (SH3)
• Number of residues: 62
• Protein size: 5.6 kDa
• Labeling: ¹³C, ¹⁵N

• 5 mg
• SRC Homology 3 domain (SH3)
• Number of residues: 62
• Protein size: 5.6 kDa
• Labeling: ¹³C, ¹⁵N

• 5 mg
• SRC Homology 3 domain (SH3)
• Number of residues: 62
• Protein size: 5.6 kDa
• Labeling: ¹³C, ¹⁵N

• 10 mg
• SRC Homology 3 domain (SH3)
• Number of residues: 62
• Protein size: 5.6 kDa
• Labeling: ¹³C, ¹⁵N, D

• 10 mg
• SRC Homology 3 domain (SH3)
• Number of residues: 62
• Protein size: 5.6 kDa
• Labeling: ¹³C, ¹⁵N, D

• 10 mg
• SRC Homology 3 domain (SH3)
• Number of residues: 62
• Protein size: 5.6 kDa
• Labeling: ¹³C, ¹⁵N, D

• 10 mg
• SRC Homology 3 domain (SH3)
• Number of residues: 62
• Protein size: 5.6 kDa
• Labeling: ¹⁵N

• 20 mg
• SRC Homology 3 domain (SH3)
• Number of residues: 62
• Protein size: 5.6 kDa
• Labeling: ¹⁵N

• 5 mg
• SRC Homology 3 domain (SH3)
• Number of residues: 62
• Protein size: 5.6 kDa
• Labeling: ¹⁵N

• 10 mg
• B-1 Immunoglobulin G Binding Domain (GB1)
• Residues 303-357 of the protein G, with T303Q mutation
• Size: 6.2 kDa
• Labeling: ¹⁵N

• 20 mg
• B-1 Immunoglobulin G Binding Domain (GB1)
• Residues 303-357 of the protein G, with T303Q mutation
• Size: 6.2 kDa
• Labeling: ¹⁵N

• 5 mg
• B-1 Immunoglobulin G Binding Domain (GB1)
• Residues 303-357 of the protein G, with T303Q mutation
• Size: 6.2 kDa
• Labeling: ¹⁵N

• 10 mg
• Full length Ubiquitin (Residue 1-76)
• Protein size: 6.8 kDa
• Labeling: ¹⁵N

• 20 mg
• Full length Ubiquitin (Residue 1-76)
• Protein size: 6.8 kDa
• Labeling: ¹⁵N

• 5 mg
• Full length Ubiquitin (Residue 1-76)
• Protein size: 6.8 kDa
• Labeling: ¹⁵N

• 10 mg
• B-1 Immunoglobulin G Binding Domain (GB1)
• Residues 303-357 of the protein G, with T303Q mutation
• Size: 6.2 kDa
• Labeling: ¹³C, ¹⁵N

• 20 mg
• B-1 Immunoglobulin G Binding Domain (GB1)
• Residues 303-357 of the protein G, with T303Q mutation
• Size: 6.2 kDa
• Labeling: ¹³C, ¹⁵N

• 5 mg
• B-1 Immunoglobulin G Binding Domain (GB1)
• Residues 303-357 of the protein G, with T303Q mutation
• Size: 6.2 kDa
• Labeling: ¹³C, ¹⁵N

• 10 mg
• Full length Ubiquitin (Residue 1-76)
• Protein size: 6.8 kDa
• Labeling: ¹³C, ¹⁵N

• 20 mg
• Full length Ubiquitin (Residue 1-76)
• Protein size: 6.8 kDa
• Labeling: ¹³C, ¹⁵N

• 5 mg
• Full length Ubiquitin (Residue 1-76)
• Protein size: 6.8 kDa
• Labeling: ¹³C, ¹⁵N

• 10 mg
• B-1 Immunoglobulin G Binding Domain (GB1)
• Residues 303-357 of the protein G, with T303Q mutation
• Size: 6.2 kDa
• Labeling: ¹³C, ¹⁵N, D

• 20 mg
• B-1 Immunoglobulin G Binding Domain (GB1)
• Residues 303-357 of the protein G, with T303Q mutation
• Size: 6.2 kDa
• Labeling: ¹³C, ¹⁵N, D

• 5 mg
• B-1 Immunoglobulin G Binding Domain (GB1)
• Residues 303-357 of the protein G, with T303Q mutation
• Size: 6.2 kDa
• Labeling: ¹³C, ¹⁵N, D

• 10 mg
• Full length Ubiquitin (Residue 1-76)
• Protein size: 6.8 kDa
• Labeling: ¹³C, ¹⁵N, D

• 20 mg
• Full length Ubiquitin (Residue 1-76)
• Protein size: 6.8 kDa
• Labeling: ¹³C, ¹⁵N, D

• 5 mg
• Full length Ubiquitin (Residue 1-76)
• Protein size: 6.8 kDa
• Labeling: ¹³C, ¹⁵N, D

Biradical for Dynamic Nuclear Polarization

Biradical for Dynamic Nuclear Polarization

Biradical for Dynamic Nuclear Polarization

For use with 3.2 mm Thin Wall MAS rotors (HZ16252)
• T° Range: (-30 to +70°C)

Has been replaced by HZ16913

Kit contains:
• 3.2 mm cap remover for Thin Wall rotor
• 3.2 mm filling funnel for Thin Wall rotor
• 3.2 mm cap set tool for Thin Wall rotor
• 3.2 mm packer for Thin Wall rotor

For use with 50 µL HR-MAS rotor only (HZ07213)
Kit contains:
• One extration tool
• One scredriver
• One depth gauge

For use with 4 mm MAS rotor (H6283)

Each set contains:
• Ten Kel-F inserts
• Ten sealing screws
• Ten plugs
• One set of tools (Fork screwdriver, blunt-ended screwdriver, extraction screw)

For use with 4 mm HR-MAS rotor only (HZ07213)

Pack of:
• One 50 µL HR-MAS PTFE insert
• One M2x2 Kel-F thread pin (HZ04800)
• One M2x25 cylindric screw

Pack of:
• One 3.2 mm Regular Wall ZrO₂ MAS rotor (HZ09244)
• Three 3.2 mm SP1 drive caps (HZ07306)

For use with 1.9 mm MAS rotor

Pack of:
• One 1.9 mm ZrO₂ MAS rotor
• Two 1.9 mm SP1 bottom caps (HZ16789)
• Two 1.9 mm SP1 drive caps (H122284)

Tool for cap removal from 2.5 mm Thin Wall MAS rotor

Pack of:
• One 4 mm ZrO₂ MAS rotor (H6283)
• Three 4 mm Kel-F drive caps (H6304)

Pack of:
• One 4 mm ZrO₂ MAS rotor (H6283)
• One 4 mm ZrO₂ drive cap (HZ05951)
• One 4 mm Kel-F drive cap (H6304)

Pack of:
• One 7 mm ZrO₂ rotor
• Three 7 mm Kel-F drive caps without hole

Pack of:
• One 7 mm ZrO₂ rotor
• One 7 mm ZrO₂ drive cap

Tools for cap positioning on 4 mm MAS rotors

0.7mm ZrO₂ rotor tested with Vespel caps

Each kit includes:
• One 0.7 mm MAS rotor
• Four 0.7 mm SP1 drive caps
• Four 0.7 mm SP1 bottom caps

For use with 7 mm CRAMPS rotor only

For moisture sensitive experiments

4 mm ZrO₂ MAS rotors (no caps included)
For use with 4 mm caps:
• Kel-F drive cap (H6304)
• SP1 drive cap (HZ12360)
• ZrO₂ drive cap (HZ05951)

For use with:
• 4 mm MAS rotor (H6283)
• 4 mm HR-MAS rotors (HZ05537, HZ05528, HZ07213)

Pack of:
• One 4 mm ZrO₂ CRAMPS rotor
• Two 4 mm Kel-F drive caps
• One M2x25 cylindric screw
• One 4 mm CRAMPS PE spacer

Pack of:
• One 4 mm ZrO₂ CRAMPS rotor
• Two 4 mm Kel-F drive caps
• One M2x25 cylindric screw
• One 4 mm CRAMPS Kel-F spacer

Pack of:
• One 4 mm ZrO₂ CRAMPS rotor
• Two 4 mm Kel-F drive caps
• One M2x25 cylindric screw
• One 4 mm CRAMPS PTFE spacer

For use with 4 mm HR-MAS rotor only (HZ05537, HZ05538)

Pack of:
• One 12 µL HR-MAS Kel-F insert
• One M2x2 Kel-F MAS thread pin (HZ04800)
• One M2x25 cylindric screw

For use with 4 mm HR-MAS rotor only (HZ05537, HZ05538)

Pack of:
• One 12 µL HR-MAS PTFE insert
• One M2x2 Kel-F MAS thread pin (HZ04800)
• One M2x25 cylindric screw

Individual 4 mm sapphire rotor (no caps included)
For use with 4 mm caps:
• SP1 drive cap (HZ12360)
• ZrO₂ drive cap (HZ05951)

For use with 4mm HR-MAS rotor only (HZ05537, HZ05538, HZ07213)

For use with regular wall 2.5 mm MAS rotors (HZ05165)
Length: 2 mm

For use with regular wall 2.5 mm MAS rotors (HZ05165)
Length: 2 mm

Tool for cap removal from 2.5 mm Regular Wall MAS rotor

Tool for cap removal from 4 mm MAS rotor

Tool for cap removal from 7 mm MAS rotor

For use with:
• 4 mm ZrO₂ MAS rotor (H6283)
• 4 mm sapphire MAS rotor (H8932)
• 4 mm Si₃N₄ MAS rotors (K1911)

For use with 4 mm High Speed MAS rotor only. Please refer to item HZ12360 for regular 4mm SP1 cap

For use with 2.5 mm Thin Wall MAS rotors (HZ15196)

For use with 2.5 mm Thin Wall MAS rotors (HZ15196)

For use with:
• 4 mm ZrO₂ MAS rotor (H6283)
• 4 mm sapphire MAS rotor (H8932)
• 4 mm ZrO₂ HR-MAS rotors (HZ05537, HZ05528, HZ07213)

For use with 3.2 mm Thick Bottom, Regular Wall MAS rotors (HZ09243)

Pack of:
• One 3.2mm Thick Bottom, Regular Wall ZrO₂ MAS rotor (HZ09243)
• One 3.2mm SP1 drive cap (HZ07306)
• Two 3.2mm Kel-F drive cap (HZ07308)
• One PTFE spacer (HZ13618)

Tools for cap positioning on 1.3 mm MAS rotor

Pack of:
• One 2.5 mm Thin Wall ZrO₂ MAS rotor
• Two 2.5 mm SP1 bottom caps for Thin Wall rotor (HZ06694)
• Two 2.5mm SP1 drive caps for Thin Wall rotor (HZ06693)

For use with 3.2 mm Thin Wall MAS rotors (HZ16252)

Tools for cap positioning on 3.2 mm Regular Wall and Thin Wall MAS rotors

Tools for cap positioning on 2.5 mm Regular Wall and Thin Wall MAS rotors

For use with 1.9 mm MAS rotor

Tools for cap positioning on 1.9 mm MAS rotor

Tool for cap removal from 1.9 mm MAS rotor

For use with 3.2 mm Thin Wall MAS rotors (HZ16252)

For use with CRAMPS rotor only

For use with CRAMPS rotor only

For use with CRAMPS rotor only

Pack of:
• One 7 mm ZrO₂ MAS rotor
• One 7 mm SP1 drive cap with hole
• One 7 mm Kel-F drive cap without hole
• One 7 mm Kel-F drive cap with hole

Pack of:
• One 7 mm ZrO₂ CRAMPS rotor
• Two 7 mm Kel-F drive caps without hole
• One cylindric screw M2x25
• One 7 mm CRAMPS Kel-F spacer

discontinued, please refer to H6304, HZ12360 or HZ05951 for alternative caps

For use with 0.7 mm MAS rotor

For use with 0.7 mm MAS rotor

Tools for cap positioning on 7 mm MAS rotors

Tool for cap removal for 3.2 mm Regular and Thin Wall MAS rotor

Pack of:
• One 4 mm ZrO₂ MAS rotor (H6283)
• Two 4 mm Kel-F drive caps (H6304)
• One 4 mm SP1 drive caps (HZ12360)

Quartz Precision Tube

Quartz Precision Tube

Quartz Precision Tube

Quartz Precision Tube

Quartz Precision Tube

Quartz Precision Tube

Quartz Precision Tube

Quartz Precision Tube

Suprasil® Precision Tube

Suprasil® Precision Tube

Suprasil® Precision Tube

Suprasil® Precision Tube

Suprasil® Precision Tube

Suprasil® Precision Tube

Suprasil® EPR capillary

Quartz EPR capillary

Quartz EPR capillary

Quartz EPR capillary

Suprasil® EPR capillary

Suprasil® EPR capillary

• For Bruker and Jeol probe
• 10mm Symmetrical Microtube
• Matched with DMSO

For use with:
• 3.2 mm Regular Wall rotor (HZ09244)
• 3.2 mm sapphire rotor (B6939)

For use with 3.2 mm caps for Regular Wall rotor:
• SP1 drive cap (HZ07306)
• ZrO₂ drive cap (HZ12372)

For use with 3.2 mm caps for Regular Wall rotor:
• SP1 drive cap (HZ07306)
• ZrO₂ drive cap (HZ12372)