Search results for: 'plug 5 mms tube'

Pack of:
• One 7 mm ZrO₂ CRAMPS rotor
• Two 7 mm Kel-F drive caps without hole
• One cylindric screw M2x25
• One 7 mm CRAMPS Kel-F spacer

Compatible with Bruker probes only

Compatible with Jeol probes only

Compatible with Varian probes only

• For 10 mm Screw Thread Tubes
• Septa included

Individual 3.2 mm Thick Bottom, Regular Wall ZrO₂ MAS rotor (no caps included)
For use with 3.2 mm caps for Regular Wall rotor:
• SP1 drive cap (HZ07306)
• Kel-F drive cap (HZ07308)

Compatible with Varian probes only

Compatible with Varian probes only

For All TE102 except JEOL

Compatible with Bruker and Jeol probes

Pack of:
• One 4 mm ZrO₂ HR MAS rotor (labeled)
• Three 4 mm Kel-F drive cap (H6304)
• One 4 mm 12 µL PTFE spacer
• One Kel-F thread pin (HZ04800)
• One M2x25 cylindric screw

Pack of:
• One 4 mm ZrO₂ HR MAS rotor (labeled)
• Three 4 mm Kel-F drive cap (H6304)
• One 4 mm 50 µL PTFE spacer
• One Kel-F thread pin (HZ04800)
• One M2x25 cylindric screw

Compatible with all manufacturers probes

Compatible with Bruker probes only

Pack of:
• One 4 mm ZrO₂ HR MAS rotor (labeled)
• Three 4 mm Kel-F drive cap (H6304)
• One 4 mm 12 µL Kel-F spacer
• One Kel-F thread pin (HZ04800)
• One M2x25 cylindric screw

For use with regular wall 2.5 mm MAS rotors (HZ05165)
Length: 2 mm

For use with regular wall 2.5 mm MAS rotors (HZ05165)
Length: 2 mm

For casting 6 mm gels

• For Precision NMR tube
• Color: White

For use with Microtubes

For use with Microtubes

Material: Polyethylene

Compatible with Bruker probes only

Compatible with Varian probes only

For use with:
• 4 mm ZrO₂ MAS rotor (H6283)
• 4 mm sapphire MAS rotor (H8932)
• 4 mm Si₃N₄ MAS rotors (K1911)

Pack of
• One 3.2 mm thin wall MAS rotor
• Three SP1 drive caps

For 3 mm O.D., 7" Long NMR tubes

• B-1 Immunoglobulin G Binding Domain (GB1)
• Residues 303-357 of the protein G, with T303Q mutation
• Size: 6.2 kDa
• Labeling: ¹³C, ¹⁵N

• Full length Ubiquitin (Residue 1-76)
• Protein size: 6.8 kDa
• Labeling: ¹³C, ¹⁵N

For use with:
• 4 mm ZrO₂ MAS rotor (H6283)
• 4 mm sapphire MAS rotor (H8932)
• 4 mm ZrO₂ HR-MAS rotors (HZ05537, HZ05528, HZ07213)

Tool for sample compression into 4 mm MAS rotor

Tool for sample compression into 7 mm MAS rotor

Tool for cap removal from 4 mm MAS rotor

Tool for cap removal from 7 mm MAS rotor

Tool for sample loading into 7 mm MAS rotor

Tool for sample loading into 4 mm MAS rotor

Quartz EPR capillary

• Full length Ubiquitin (Residue 1-76)
• Protein size: 6.8 kDa
• Labeling: ¹³C, ¹⁵N, D

• B-1 Immunoglobulin G Binding Domain (GB1)
• Residues 303-357 of the protein G, with T303Q mutation
• Size: 6.2 kDa
• Labeling: ¹³C, ¹⁵N

Tool for cap removal from 1.3 mm MAS rotor

Tool for sample loading into 1.3 mm MAS rotor

Tool for sample compression into 1.3 mm MAS rotor

Tool for sample loading into 1.9 mm MAS rotor

Tool for sample compression into 1.9 mm MAS rotor

Tool for cap removal from 1.9 mm MAS rotor

For use with 1.9 mm MAS rotor

For use with 1.3 mm MAS rotor

For use with 1.3 mm MAS rotor

For use with 1.9 mm MAS rotor

For use with 0.7 mm MAS rotor

For use with 0.7 mm MAS rotor

Suprasil® EPR capillary

Suprasil® EPR capillary

Suprasil® EPR capillary

Quartz EPR capillary

Quartz EPR capillary

For use in 5mm thin walled NMR tubes up to 8 inches in length

Pack of:
• One 3.2 mm sapphire rotor (B6939)
• One 3.2 mm SP1 drive cap (HZ07306)
• Two 3.2 mm ZrO₂ drive caps (HZ12372)

0.7mm ZrO₂ rotor tested with Vespel caps

Each kit includes:
• One 0.7 mm MAS rotor
• Four 0.7 mm SP1 drive caps
• Four 0.7 mm SP1 bottom caps

Tool for cap removal from 2.5 mm Thin Wall MAS rotor

Tool for cap removal from 2.5 mm Regular Wall MAS rotor

Tool for sample loading into 2.5 mm Regular Wall MAS rotor

Tool for sample compression into 2.5 mm Regular Wall MAS rotor

Tool for sample compression into 2.5 mm Thin Wall MAS rotor

Tool for sample loading into 2.5 mm Thin Wall MAS rotor

Compatible with Bruker and Jeol probes

• O.D.: 2.11 mm
• Length: 12"

• O.D.: 2.01 mm
• Length: 12"

• O.D.: 1.57 mm
• Length: 12"

• O.D.: 1.02 mm
• Length: 12"

• O.D.: 0.79 mm
• Length: 12"

For use with 2.5 mm Thin Wall MAS rotors (HZ15196)

For use with 2.5 mm Thin Wall MAS rotors (HZ15196)

For use with:
• 4 mm MAS rotor (H6283)
• 4 mm HR-MAS rotors (HZ05537, HZ05528, HZ07213)

Compatible with Bruker and Jeol probes

Compatible with Bruker and Jeol probes

Compatible with Bruker probes only

Compatible with Jeol probes only

Compatible with Varian probes only

Pack of 10

Pack of 10

Pack of 10

Pack of 10

Pack of 10

Pack of 10

Tools for cap positioning on 1.3 mm MAS rotor

Tools for cap positioning on 1.9 mm MAS rotor

For use with 7 mm CRAMPS rotor only

• Packaging: 5 x 10 mL (PTFE faced rubber septum)
• 99.8% D
• Water content: < 0.02%

Compatible with Bruker probes only

Compatible with Jeol probes only

Compatible with Varian probes only

Compatible with Bruker probes only

Compatible with Jeol probes only

Compatible with Varian probes only

For use with Microtubes

For stretch from 5.4 mm to 4.2 mm

Compatible with Bruker and Jeol probes

Compatible with Varian probes only

Compatible with Varian probes only

Material: Polyethylene

• 250 mg
• 99% ¹³C

• 1 g
• 99% ¹³C

Material: Polyethylene

Kit contains:
• 3.2 mm cap remover for Thin Wall rotor
• 3.2 mm filling funnel for Thin Wall rotor
• 3.2 mm cap set tool for Thin Wall rotor
• 3.2 mm packer for Thin Wall rotor

Compatible with Bruker and Jeol probes

Compatible with Varian probes only

Compatible with Varian probes only

Compatible with Bruker and Jeol probes

Compatible with Varian probes only

Compatible with Varian probes only

Includes:
• Piston Driver
• Cap
• Piston
• Gel Chamber
• Funnel

Fits Wilmad Precision Thin Wall NMR Tubes

Material: Polyethylene

Compatible with Bruker probes only

Compatible with all manufacturers probes

For use with:
• 3.2 mm Regular Wall rotor (HZ09244)
• 3.2 mm sapphire rotor (B6939)

Compatible with Bruker probes only

Compatible with all manufacturers probes

Compatible with Bruker probes only

Compatible with all manufacturers probes

Box of 450 inserts

Tools for cap positioning on 7 mm MAS rotors

Compatible with Bruker probes only

Compatible with Varian probes only

For use with 3.2 mm caps for Regular Wall rotor:
• SP1 drive cap (HZ07306)
• ZrO₂ drive cap (HZ12372)

For use with Microtubes

Tools for cap positioning on 2.5 mm Regular Wall and Thin Wall MAS rotors

• Packaging: 5 x 10 mL
• 99.8% D
• Contains 0.03% TMS (v/v)
• Water content: < 0.02%

Compatible with Bruker probes only

Compatible with Varian probes only

Compatible with Bruker probes only

Compatible with Varian probes only

For use with regular wall 2.5 mm MAS rotors (HZ05165)
Sample Volume: about 8 µL

Box of 450 inserts

Box of 450 inserts

Tool for sample compression into 3.2 mm Regular Wall MAS rotor

Tool for sample loading into 3.2 mm Regular Wall MAS rotor

Includes 1 Sample Tube NE-UP5-CGT

For use with 3.2 mm Thin Wall MAS rotors (HZ16252)

For use with:
• 3.2 mm Regular Wall MAS rotors (HZ09244)
• 3.2 mm sapphire rotor (B6939)
• T° Range: (-30 to +70°C)

For use with 3.2 mm Thick Bottom, Regular Wall MAS rotors (HZ09243)

For use with Microtubes

For use with Microtubes

For use with Microtubes

For use with Microtubes

For use with Microtubes

For All TE102 except JEOL

For Bruker 10 mm O.D.

For Bruker 8 mm O.D.

Contains:
• 1 Bushing/Heat Shield with O-Rings