Search results for: 'ph mm hr rod band teflon 5mm labels'

For use in 5mm thin walled NMR tubes up to 8 inches in length

Pack of:
• One 4 mm ZrO₂ HR MAS rotor (labeled)
• Three 4 mm Kel-F drive cap (H6304)
• One 4 mm 12 µL PTFE spacer
• One Kel-F thread pin (HZ04800)
• One M2x25 cylindric screw

Pack of:
• One 4 mm ZrO₂ HR MAS rotor (labeled)
• Three 4 mm Kel-F drive cap (H6304)
• One 4 mm 50 µL PTFE spacer
• One Kel-F thread pin (HZ04800)
• One M2x25 cylindric screw

Pack of:
• One 4 mm ZrO₂ HR MAS rotor (labeled)
• Three 4 mm Kel-F drive cap (H6304)
• One 4 mm 12 µL Kel-F spacer
• One Kel-F thread pin (HZ04800)
• One M2x25 cylindric screw

For use with 4mm HR-MAS rotor only (HZ05537, HZ05538, HZ07213)

• For photochemistry studies
• Suprasil®
• Cutoff wavelength: 190 nm

• For photochemistry studies
• Suprasil®
• Cutoff wavelength: 190 nm

• For photochemistry studies
• Cleared Fused QuartzQ
• Cutoff wavelength: 190 nm

• For photochemistry studies
• Suprasil®
• Cutoff wavelength: 190 nm

For Extraction of End Plug

For use with 50 µL HR-MAS rotor only (HZ07213)
Kit contains:
• One extration tool
• One scredriver
• One depth gauge

For use with 4 mm MAS rotor (H6283)

Each set contains:
• 100 Kel-F inserts
• 100 sealing screws
• 100 plugs
• One set of tools (Fork screwdriver, blunt-ended screwdriver, extraction screw)

For use with 4 mm MAS rotor (H6283)

Each set contains:
• 250 Kel-F inserts
• 250 sealing screws
• 250 plugs
• One set of tools (Fork screwdriver, blunt-ended screwdriver, extraction screw)

For 7" Tubes

For use with 4 mm MAS rotor (H6283)

Each set contains:
• Ten Kel-F inserts
• Ten sealing screws
• Ten plugs
• One set of tools (Fork screwdriver, blunt-ended screwdriver, extraction screw)

Kit Contains:
• One Sample Tube NE-UP5-7
• One Adapter NE-325-5/2.5
• One Extration Rod NE-341-5
• Five 2.5 mm O.D. Capillaries NE-262-2.5

For Varian 3 - 5 mm probes and Bruker/JEOL 5 mm probes

Kit Contains:
• One Microtube NE-H5/2.5
• One Adapter NE-325-5/1.7
• One Extration Rod NE-341-5
• Five 1.7 mm O.D. Capillaries NE-262-1.7

For Bruker 2.5 - 5 mm probes

Kit Contains:
• One Microtube NE-H5/2.5-V-Br
• One Adapter NE-325-5/1.7
• One Extration Rod NE-341-5
• Five 1.7 mm O.D. Capillaries NE-262-1.7

• Compatible with New Era 5 mm O.D. 7" NMR Tube
• 1 tube liner with PTFE plug

For use with:
• 4 mm MAS rotor (H6283)
• 4 mm HR-MAS rotors (HZ05537, HZ05528, HZ07213)

For Bruker 2.5 mm probes and Varian 3-5 mm probes and JEOL 5 mm probes

For Bruker 2.5 mm probes and Varian/JEOL 5 mm probes

For Varian 3 - 5 mm probes and Bruker/JEOL 5 mm probes

For Varian 3-5 mm probes and Bruker/JEOL 5 mm probes

For use with:
• 4 mm ZrO₂ MAS rotor (H6283)
• 4 mm sapphire MAS rotor (H8932)
• 4 mm ZrO₂ HR-MAS rotors (HZ05537, HZ05528, HZ07213)

Kit Contains:
• One Microtube NE-H5/3
• One Adapter NE-325-5/2
• One Extration Rod NE-341-5
• Five 1.7 mm O.D. Capillaries NE-262-2

Kit Contains:
• One Microtube NE-H5/3-Br
• One Adapter NE-325-5/2
• One Extration Rod NE-341-5
• Five 2 mm O.D. Capillaries NE-262-2

For Bruker/Varian/JEOL 5 mm probes

For Bruker/Varian/JEOL 5 mm probes

• Compatible with New Era 10 mm O.D. 7" NMR Tube
• 1 tube liner with PTFE plug

2 mM Sucrose, 0.5 mM DSS, 2 mM NaN₃ in D₂O/H₂O 10/90

10 mM Sucrose, 0.5 mM DSS, 2 mM NaN₃ in D₂O/H₂O 10/90

• 2.5 mm Stem
• For Bruker® 2.5 mm MicroProbe

2 mM Sucrose, 0.5 mM DSS, 2 mM NaN₃ in D₂O/H₂O 10/90

10 mM Sucrose, 0.5 mM DSS, 2 mM NaN₃ in D₂O/H₂O 10/90

2 mM Sucrose, 0.5 mM DSS, 2 mM NaN₃ in D₂O/H₂O 10/90

2 mM Sucrose, 0.5 mM DSS, 2 mM NaN₃ in D₂O/H₂O 10/90

• Individual 4 mm Si₃N₄ MAS rotor (no caps included)
• For use with 4 mm caps: ZrO₂ drive cap (HZ05951)

100 mM ¹⁵N-enriched Urea, 100 mM ¹³C-enriched Methanol in DMSO-d₆

100 mM ¹⁵N-enriched Urea, 100 mM ¹³C-enriched Methanol in DMSO-d₆

100 mM ¹⁵N-enriched Urea, 100 mM ¹³C-enriched Methanol in DMSO-d₆

100 mM ¹⁵N-enriched Urea, 100 mM ¹³C-enriched Methanol in DMSO-d₆

• 1.7 mm Stem
• For Bruker® 1.7 mm MicroCryoProbe

Pack of:
• One 1.9 mm ZrO₂ MAS rotor
• Two 1.9 mm SP1 bottom caps (HZ16789)
• Two 1.9 mm SP1 drive caps (H122284)

Individual 4 mm sapphire rotor (no caps included)
For use with 4 mm caps:
• SP1 drive cap (HZ12360)
• ZrO₂ drive cap (HZ05951)

Pack of:
• One 4 mm ZrO₂ MAS rotor (H6283)
• One 4 mm ZrO₂ drive cap (HZ05951)
• One 4 mm Kel-F drive cap (H6304)

2 mM Sucrose, 0.5 mM DSS, 2 mM NaN₃ in D₂O/H₂O 10/90

4 mm ZrO₂ MAS rotors (no caps included)
For use with 4 mm caps:
• Kel-F drive cap (H6304)
• SP1 drive cap (HZ12360)
• ZrO₂ drive cap (HZ05951)

25 mM Cyclosporin in Benzene-d₆

25 mM Cyclosporin in Benzene-d₆

25 mM Cyclosporin in Benzene-d₆

For use in Thin Wall 5 mm Tubes

Pack of:
• One 4 mm ZrO₂ MAS rotor (H6283)
• Three 4 mm Kel-F drive caps (H6304)

For use in Thin Wall 5 mm Tubes

Pack of:
• One 4 mm ZrO₂ MAS rotor (H6283)
• Two 4 mm Kel-F drive caps (H6304)
• One 4 mm SP1 drive caps (HZ12360)

100 mM ¹⁵N-enriched Urea, 100 mM ¹³C-enriched Methanol in DMSO-d₆

Pack of:
• One 4 mm ZrO₂ CRAMPS rotor
• Two 4 mm Kel-F drive caps
• One M2x25 cylindric screw
• One 4 mm CRAMPS PE spacer

Pack of:
• One 4 mm ZrO₂ CRAMPS rotor
• Two 4 mm Kel-F drive caps
• One M2x25 cylindric screw
• One 4 mm CRAMPS PTFE spacer

Pack of :
• One 1.3 mm ZrO₂ MAS rotor
• Two 1.3 mm SP1 bottom cap (HZ08194)
• Two 1.3 mm SP1 drive caps (HZ14381)

For use with Thin Wall Tubes

Pack of:
• One 4 mm ZrO₂ CRAMPS rotor
• Two 4 mm Kel-F drive caps
• One M2x25 cylindric screw
• One 4 mm CRAMPS Kel-F spacer

Pack of:
• One 7 mm ZrO₂ rotor
• One 7 mm ZrO₂ drive cap

• For minimizing evaporation in sample tubes
• Box of 10 plugs
• 1 removal rod included

• For minimizing evaporation in sample tubes
• Box of 10 plugs
• 1 removal rod included

To secure support rod

Pack of:
• One 2.5 mm Regular Wall ZrO₂ MAS rotor (HZ05165)
• Two 2.5 mm SP1 bottom caps for Regular Wall rotor (HZ05267)
• Two 2.5 mm SP1 drive caps for Regular Wall rotors (HZ05269)

Pack of:
• One 7 mm ZrO₂ MAS rotor
• One 7 mm SP1 drive cap with hole
• One 7 mm Kel-F drive cap without hole
• One 7 mm Kel-F drive cap with hole

Pack of:
• One 7 mm ZrO₂ rotor
• Three 7 mm Kel-F drive caps without hole

For Low Temperature NMR Experiments

Pack of:
• One 1.9 mm ZrO₂ MAS rotor
• Two tight fit 1.9 mm SP1 bottom caps (HZ16789)
• Two tight fit 1.9 mm SP1 drive caps (H122284)

Pack of:
• One 7 mm ZrO₂ CRAMPS rotor
• Two 7 mm Kel-F drive caps without hole
• One cylindric screw M2x25
• One 7 mm CRAMPS Kel-F spacer

2 mM Lysozyme in H₂O/D₂O 90/10

• 100 mm long
• Pyrex®
• Both Ends Open

• 100 mm long
• Pyrex®
• Sealed at one end
• For Agilent Cold Probe

Pack of:
• One 2.5 mm Thin Wall ZrO₂ MAS rotor
• Two 2.5 mm SP1 bottom caps for Thin Wall rotor (HZ06694)
• Two 2.5mm SP1 drive caps for Thin Wall rotor (HZ06693)

Individual 3.2 mm Thick Bottom, Regular Wall ZrO₂ MAS rotor (no caps included)
For use with 3.2 mm caps for Regular Wall rotor:
• SP1 drive cap (HZ07306)
• Kel-F drive cap (HZ07308)

For use with Microtubes

For use with Microtubes

• 75 mm long
• Pyrex®
• Sealed at one end

• 100 mm long
• Pyrex®
• Sealed at one end

For use with 2.5 mm caps for Regular Wall MAS rotors:
• HZ05269 (SP1 drive cap)
• HZ05276 (SP1 bottom cap)

For casting 5 mm gels

• 203 mm long
• Pyrex®
• Sealed at one end

• 100 mm long
• Pyrex®
• Sealed at one end

• Suprasil Precision Tube
• Medium Wall
• 250 mm long

2 mM Lysozyme in H₂O/D₂O 90/10

0.3% Chloroform (CHCl₃) in Acetone-d₆, 40 mm height filling

0.3% Chloroform (CHCl₃) in Acetone-d₆, 40 mm height filling

• 203 mm long
• Pyrex®
• Sealed at one end

For use with:
• 4 mm ZrO₂ MAS rotor (H6283)
• 4 mm sapphire MAS rotor (H8932)
• 4 mm Si₃N₄ MAS rotors (K1911)

Pack of
• One 3.2 mm thin wall MAS rotor
• Three SP1 drive caps

For use in Thin Wall 5 mm Tubes

Quartz Economy Tube

Quartz Economy Tube

Suprasil® Economy Tube

Tool for sample compression into 4 mm MAS rotor

Tool for sample compression into 7 mm MAS rotor

Tool for cap removal from 4 mm MAS rotor

Tool for cap removal from 7 mm MAS rotor

Tool for sample loading into 7 mm MAS rotor

Tool for sample loading into 4 mm MAS rotor

For reference standard samples

Tool for cap removal from 1.3 mm MAS rotor

Tool for sample loading into 1.3 mm MAS rotor

Tool for sample compression into 1.3 mm MAS rotor

Tool for sample loading into 1.9 mm MAS rotor

Tool for sample compression into 1.9 mm MAS rotor

Tool for cap removal from 1.9 mm MAS rotor

For use with 1.9 mm MAS rotor

For use with 1.3 mm MAS rotor

For use with 1.3 mm MAS rotor

For use with 1.9 mm MAS rotor

For use with 0.7 mm MAS rotor

For use with 0.7 mm MAS rotor

Pack of:
• One 3.2 mm sapphire rotor (B6939)
• One 3.2 mm SP1 drive cap (HZ07306)
• Two 3.2 mm ZrO₂ drive caps (HZ12372)

0.7mm ZrO₂ rotor tested with Vespel caps

Each kit includes:
• One 0.7 mm MAS rotor
• Four 0.7 mm SP1 drive caps
• Four 0.7 mm SP1 bottom caps

For use with Microtubes

For use with Microtubes

Shuttle to hold 5.0 mm tubes for use with SampleJet system

Shuttle to hold 3.0 mm tubes for use with SampleJet system

Shuttle to hold 1.7 mm tubes for use with SampleJet system

Shuttle to hold 1.0 mm tubes for use with SampleJet system

Compatible with Bruker probes only

Compatible with Jeol probes only

Compatible with Varian probes only

Pack of 10

Pack of 10

Pack of 10

Pack of 10

Pack of 10

Pack of 10

Pack of 10

Pack of 10

Tools for cap positioning on 1.3 mm MAS rotor

Tools for cap positioning on 1.9 mm MAS rotor

Compatible with Bruker probes only

Compatible with Bruker probes only

Compatible with Jeol probes only

Compatible with Varian probes only

For use with 4 mm HR-MAS rotor only (HZ07213)

Pack of:
• One 50 µL HR-MAS PTFE insert
• One M2x2 Kel-F thread pin (HZ04800)
• One M2x25 cylindric screw

For use with 7 mm CRAMPS rotor only

For use with regular wall 2.5 mm MAS rotors (HZ05165)
Length: 2 mm

For use with regular wall 2.5 mm MAS rotors (HZ05165)
Length: 2 mm

For use with Microtubes

For use with 4 mm HR-MAS rotor only (HZ05537, HZ05538)

Pack of:
• One 12 µL HR-MAS PTFE insert
• One M2x2 Kel-F MAS thread pin (HZ04800)
• One M2x25 cylindric screw

Kit contains:
• 3.2 mm cap remover for Thin Wall rotor
• 3.2 mm filling funnel for Thin Wall rotor
• 3.2 mm cap set tool for Thin Wall rotor
• 3.2 mm packer for Thin Wall rotor

For use with 4 mm HR-MAS rotor only (HZ05537, HZ05538)

Pack of:
• One 12 µL HR-MAS Kel-F insert
• One M2x2 Kel-F MAS thread pin (HZ04800)
• One M2x25 cylindric screw

• For 5 mm Screw Thread Tubes
• Cap not included

For use with:
• 3.2 mm Regular Wall rotor (HZ09244)
• 3.2 mm sapphire rotor (B6939)

• For 5 mm Screw Thread Tubes
• Septa not included

• For 5 mm Screw Thread Tubes
• Septa included

• Box of 400 tubes
• Caps not included

• Box of 100 tubes
• Caps not included

• Box of 30 tubes
• Caps not included

• Box of 9 tubes
• Caps not included

Box of 450 inserts

Tools for cap positioning on 7 mm MAS rotors

For casting 5.4 mm gels

For casting 6 mm gels

• Box of 550 tubes
• Caps not included

For use with 3.2 mm caps for Regular Wall rotor:
• SP1 drive cap (HZ07306)
• ZrO₂ drive cap (HZ12372)

• Replaces Part Number Z117559
• Pack of 100 certified tubes
• 178 mm (7") long tubes
• For routine use
• Includes 100 coded caps without holes

• Replaces Part Number Z107373
• Pack of 100 certified tubes
• 178 mm (7") long tubes
• For routine use
• Includes 100 coded caps without holes

For use with Microtubes

Box of 450 inserts

Box of 450 inserts

• Replaces Part Number Z117724
• Pack of 100 certified tubes
• 103.5 mm (4") long tubes
• For routine use in SampleJet racks
• Includes 100 coded caps without holes

• Replaces Part Number Z117777
• Pack of 100 certified tubes
• 103.5 mm (4") long tubes
• For routine use in SampleJet racks
• Includes 100 coded caps without holes

Compatible with Bruker probes only

Compatible with Jeol probes only

Compatible with Varian probes only

Tool for cap removal from 2.5 mm Thin Wall MAS rotor

Tool for cap removal from 2.5 mm Regular Wall MAS rotor

Tool for sample loading into 2.5 mm Regular Wall MAS rotor

Tool for sample compression into 2.5 mm Regular Wall MAS rotor

Tool for sample compression into 3.2 mm Regular Wall MAS rotor

Tool for sample loading into 3.2 mm Regular Wall MAS rotor