Search results for: 'tube rmn 3 mm'

For Use with Pressure Valve (PCAV) and Controlled Atmosphere (CAV) Tubes

For Use with Pressure Valve (PCAV) and Controlled Atmosphere (CAV) Tubes

• For minimizing evaporation in sample tubes
• Box of 10 plugs
• 1 removal rod included

• For minimizing evaporation in sample tubes
• Box of 10 plugs
• 1 removal rod included

1% Chloroform (CHCl₃) in Acetone-d₆

1% Chloroform (CHCl₃) in Acetone-d₆

• Individual 4 mm Si₃N₄ MAS rotor (no caps included)
• For use with 4 mm caps: ZrO₂ drive cap (HZ05951)

10% Ethylbenzene (EB) in Chloroform-d

10% Ethylbenzene (EB) in Chloroform-d

For use with Microtubes

For use with Microtubes

For use with Microtubes

For use with Microtubes

90% Formamide in DMSO-d₆

10% Ethylbenzene (EB) in Chloroform-d

40% Dioxane in Benzene-d₆

• Class B Borosilicate Glass
• 8" long
• Pack of 100 tubes with caps

Pack of:
• One 1.9 mm ZrO₂ MAS rotor
• Two 1.9 mm SP1 bottom caps (HZ16789)
• Two 1.9 mm SP1 drive caps (H122284)

• Class B Borosilicate Glass
• 7" long
• Pack of 100 tubes with caps

• Class B Borosilicate Glass
• 4" long
• Pack of 100 tubes without caps

Individual 4 mm sapphire rotor (no caps included)
For use with 4 mm caps:
• SP1 drive cap (HZ12360)
• ZrO₂ drive cap (HZ05951)

Shuttle to hold 5.0 mm tubes for use with SampleJet system

Shuttle to hold 1.7 mm tubes for use with SampleJet system

Shuttle to hold 1.0 mm tubes for use with SampleJet system

Pack of:
• One 4 mm ZrO₂ MAS rotor (H6283)
• One 4 mm ZrO₂ drive cap (HZ05951)
• One 4 mm Kel-F drive cap (H6304)

0.998

• Class B Borosilicate Glass
• 7" long
• Pack of 100 tubes with SampleJet caps

Material: Polyethylene

Material: Polyethylene

Material: Polyethylene

4 mm ZrO₂ MAS rotors (no caps included)
For use with 4 mm caps:
• Kel-F drive cap (H6304)
• SP1 drive cap (HZ12360)
• ZrO₂ drive cap (HZ05951)

90% Formamide in DMSO-d₆

Individual 3.2 mm Thick Bottom, Regular Wall ZrO₂ MAS rotor (no caps included)
For use with 3.2 mm caps for Regular Wall rotor:
• SP1 drive cap (HZ07306)
• Kel-F drive cap (HZ07308)

Pack of:
• One 4 mm ZrO₂ MAS rotor (H6283)
• Three 4 mm Kel-F drive caps (H6304)

Pack of:
• One 4 mm ZrO₂ MAS rotor (H6283)
• Two 4 mm Kel-F drive caps (H6304)
• One 4 mm SP1 drive caps (HZ12360)

• Sodium Salt Hydrate
• 98% CP
• 1 g

Pack of:
• One 4 mm ZrO₂ CRAMPS rotor
• Two 4 mm Kel-F drive caps
• One M2x25 cylindric screw
• One 4 mm CRAMPS PE spacer

Pack of:
• One 4 mm ZrO₂ CRAMPS rotor
• Two 4 mm Kel-F drive caps
• One M2x25 cylindric screw
• One 4 mm CRAMPS PTFE spacer

Kit Contains:
• One Microtube NE-H5/3
• One Adapter NE-325-5/2
• One Extration Rod NE-341-5
• Five 1.7 mm O.D. Capillaries NE-262-2

Kit Contains:
• One Microtube NE-H5/3-Br
• One Adapter NE-325-5/2
• One Extration Rod NE-341-5
• Five 2 mm O.D. Capillaries NE-262-2

Pack of:
• One 4 mm ZrO₂ CRAMPS rotor
• Two 4 mm Kel-F drive caps
• One M2x25 cylindric screw
• One 4 mm CRAMPS Kel-F spacer

Tool for cap removal from 1.3 mm MAS rotor

Tool for sample loading into 1.3 mm MAS rotor

Tool for sample compression into 1.3 mm MAS rotor

Pack of:
• One 7 mm ZrO₂ rotor
• One 7 mm ZrO₂ drive cap

• Sodium Salt Hydrate
• 99% ¹³C, 98% D
• 1 g

For use with 1.3 mm MAS rotor

For use with 1.3 mm MAS rotor

99% ¹³C

Fits Wilmad Precision Thin Wall NMR Tubes

Kit Contains:
• One Sample Tube NE-UP5-7
• One Adapter NE-325-5/2.5
• One Extration Rod NE-341-5
• Five 2.5 mm O.D. Capillaries NE-262-2.5

Pack of:
• One 2.5 mm Regular Wall ZrO₂ MAS rotor (HZ05165)
• Two 2.5 mm SP1 bottom caps for Regular Wall rotor (HZ05267)
• Two 2.5 mm SP1 drive caps for Regular Wall rotors (HZ05269)

For use in Thin Wall 5 mm Tubes

Pack of:
• One 3.2 mm sapphire rotor (B6939)
• One 3.2 mm SP1 drive cap (HZ07306)
• Two 3.2 mm ZrO₂ drive caps (HZ12372)

Pack of
• One 3.2 mm thin wall MAS rotor
• Three SP1 drive caps

Pack of 10

• For 5 mm Screw Thread Tubes
• Septa included

• For 5 mm Screw Thread Tubes
• Cap not included

• For 10 mm Screw Thread Tubes
• Cap not included

Pack of:
• One 7 mm ZrO₂ MAS rotor
• One 7 mm SP1 drive cap with hole
• One 7 mm Kel-F drive cap without hole
• One 7 mm Kel-F drive cap with hole

Tools for cap positioning on 1.3 mm MAS rotor

• For 5 mm Screw Thread Tubes
• Septa not included

• For 10 mm Screw Thread Tubes
• Septa not included

Pack of:
• One 7 mm ZrO₂ rotor
• Three 7 mm Kel-F drive caps without hole

For Low Temperature NMR Experiments

Pack of:
• One 1.9 mm ZrO₂ MAS rotor
• Two tight fit 1.9 mm SP1 bottom caps (HZ16789)
• Two tight fit 1.9 mm SP1 drive caps (H122284)

Coded caps for SampleJet use

Pack of:
• One 7 mm ZrO₂ CRAMPS rotor
• Two 7 mm Kel-F drive caps without hole
• One cylindric screw M2x25
• One 7 mm CRAMPS Kel-F spacer

For All TE102 or TE011

Pack of:
• One 2.5 mm Thin Wall ZrO₂ MAS rotor
• Two 2.5 mm SP1 bottom caps for Thin Wall rotor (HZ06694)
• Two 2.5mm SP1 drive caps for Thin Wall rotor (HZ06693)

• For 5 mm Screw Thread Tubes
• Septa included

• For 10 mm Screw Thread Tubes
• Septa included

For use with 2.5 mm caps for Regular Wall MAS rotors:
• HZ05269 (SP1 drive cap)
• HZ05276 (SP1 bottom cap)

• Sterility and Pyrogenicity Tested
• 99% ¹³C, 98% CP

• Sterility and Pyrogenicity Tested
• 99% ¹³C

Compatible with Bruker and Jeol probes

Pack of:
• One 4 mm ZrO₂ HR MAS rotor (labeled)
• Three 4 mm Kel-F drive cap (H6304)
• One 4 mm 12 µL PTFE spacer
• One Kel-F thread pin (HZ04800)
• One M2x25 cylindric screw

Pack of:
• One 4 mm ZrO₂ HR MAS rotor (labeled)
• Three 4 mm Kel-F drive cap (H6304)
• One 4 mm 50 µL PTFE spacer
• One Kel-F thread pin (HZ04800)
• One M2x25 cylindric screw

• Sodium Salt Hydrate
• 99% ¹³C, 98% D
• 1 g

98% D

99% D

• 100 mg
• 99% ¹³C
• 98% CP

• 99% ¹³C
• 98% CP

99% ¹³C

• 1 g
• 99% ¹³C
• 98% CP

99% ¹³C

• 100 mg
• 99% ¹³C
• 98% CP

• 99% ¹³C
• 1 g

• 99% ¹³C
• 1 g

• 100 mg
• 99% ¹³C
• 98% CP

• 1 g
• 99% ¹³C
• 95% CP

99% ¹³C

99% ¹³C

• 99% ¹³C
• 1 g

Compatible with Bruker probes only

Compatible with Jeol probes only

Compatible with Varian probes only

Kit contains:
• 3.2 mm cap remover for Thin Wall rotor
• 3.2 mm filling funnel for Thin Wall rotor
• 3.2 mm cap set tool for Thin Wall rotor
• 3.2 mm packer for Thin Wall rotor

• For Precision NMR tube
• Color: Red

Pack of:
• One 4 mm ZrO₂ HR MAS rotor (labeled)
• Three 4 mm Kel-F drive cap (H6304)
• One 4 mm 12 µL Kel-F spacer
• One Kel-F thread pin (HZ04800)
• One M2x25 cylindric screw

For use with 3.2 mm caps for Regular Wall rotor:
• SP1 drive cap (HZ07306)
• ZrO₂ drive cap (HZ12372)

• Sodium Salt Hydrate
• 99% ¹³C, 98% D
• 1 g

• Sodium Salt Hydrate
• 97% CP
• 250 mg

For use with:
• 3.2 mm Regular Wall rotor (HZ09244)
• 3.2 mm sapphire rotor (B6939)

For casting 5 mm gels

For casting 5.4 mm gels

For casting 6 mm gels

• Sodium Salt Solution, 5 mM Tris Buffer
• 98% D

• Sodium Salt Solution, 5 mM Tris Buffer
• 98% D

99% ¹³C, 97% D

CAS number: 285978-08-7
¹³CD₃CH(NH₂)CO₂H

Compatible with Varian probes only

Compatible with Varian probes only

Compatible with Bruker and Jeol probes

For use with:
• 4 mm ZrO₂ MAS rotor (H6283)
• 4 mm sapphire MAS rotor (H8932)
• 4 mm Si₃N₄ MAS rotors (K1911)

¹³CD₂HCD(NH₂)CO₂H

99% ¹³C, 98% ¹⁵N, 98% CP

Compatible with Bruker probes only

Compatible with Jeol probes only

Compatible with Varian probes only

• 100 mg
• 99% ¹³C

• Sterility and Pyrogenicity Tested
• 99% ¹³C, 99% CP

• Sterility and Pyrogenicity Tested
• 99% ¹³C

• Sterility and Pyrogenicity Tested
• 45-55 % (w/w) in H₂O
• ≥99% ¹³C, ≥98% CP, ≥98% Chiral Purity (HPLC)

• Sodium Salt Solution, 5 mM Tris Buffer
• 98% D

For 5 mm O.D., 7" Long NMR tubes

Compatible with Bruker probes only

Compatible with Bruker probes only

Compatible with Jeol probes only

Compatible with Varian probes only

• 1 g
• 98% D

99% ¹³C, 98% ¹⁵N

• 100 mg
• 99% ¹³C, 98% ¹⁵N
• 95% CP

99% ¹³C

• 100 mg
• 99% ¹³C
• 98% CP

• 1 g
• 98%¹³C
• 95% CP

• 98% ¹³C
• 95% CP

• 250 mg
• 99% ¹³C
• 98% CP

For use with:
• 4 mm ZrO₂ MAS rotor (H6283)
• 4 mm sapphire MAS rotor (H8932)
• 4 mm ZrO₂ HR-MAS rotors (HZ05537, HZ05528, HZ07213)

Tool for sample compression into 3.2 mm Regular Wall MAS rotor

Tool for sample loading into 3.2 mm Regular Wall MAS rotor

Tool for sample compression into 4 mm MAS rotor

Tool for sample compression into 7 mm MAS rotor

Tool for cap removal from 4 mm MAS rotor

Tool for cap removal from 7 mm MAS rotor

Tool for sample loading into 7 mm MAS rotor

Tool for sample loading into 4 mm MAS rotor

• Sodium Salt Solution, 5 mM Tris Buffer
• 98% D

Quartz EPR capillary

Tool for sample loading into 1.9 mm MAS rotor

Tool for sample compression into 1.9 mm MAS rotor

Tool for cap removal from 1.9 mm MAS rotor

For use with 1.9 mm MAS rotor