Search results for: 'CD3CN+50+ml'

For use with 50 µL HR-MAS rotor only (HZ07213)
Kit contains:
• One extration tool
• One scredriver
• One depth gauge

For use with 4 mm HR-MAS rotor only (HZ07213)

Pack of:
• One 50 µL HR-MAS PTFE insert
• One M2x2 Kel-F thread pin (HZ04800)
• One M2x25 cylindric screw

Pack of:
• One 4 mm ZrO₂ HR MAS rotor (labeled)
• Three 4 mm Kel-F drive cap (H6304)
• One 4 mm 50 µL PTFE spacer
• One Kel-F thread pin (HZ04800)
• One M2x25 cylindric screw

• Box of 9 tubes
• Caps not included

• Box of 9 tubes
• Caps included

Shuttle to hold 5.0 mm tubes for use with SampleJet system

Shuttle to hold 3.0 mm tubes for use with SampleJet system

Shuttle to hold 1.7 mm tubes for use with SampleJet system

Shuttle to hold 1.0 mm tubes for use with SampleJet system

For use with CRAMPS rotor only

For use with CRAMPS rotor only

Contains 50 silicone plugs, 50 FKM plugs and a set of tools

100 mg Pamoic acid/mL DMSO-d₆ + 1% TMS

0.1 mg GDCl₃/mL D₂O with 1% H₂O + 0.1% CH₃OH ¹³C

0.1 mg GDCl₃/mL D₂O with 1% H₂O + 0.1% CH₃OH ¹³C

0.1 mg GDCl₃/mL D₂O with 1% H₂O + 0.1% CH₃OH ¹³C

0.1 mg GDCl₃/mL D₂O with 1% H₂O + 0.1% CH₃OH ¹³C

0.1 mg GDCl₃/mL D₂O with 1% H₂O + 0.1% CH₃OH ¹³C

For use with 4 mm MAS rotor (H6283)

Each set contains:
• Ten Kel-F inserts
• Ten sealing screws
• Ten plugs
• One set of tools (Fork screwdriver, blunt-ended screwdriver, extraction screw)

Pack of:
• One 4 mm ZrO₂ CRAMPS rotor
• Two 4 mm Kel-F drive caps
• One M2x25 cylindric screw
• One 4 mm CRAMPS PE spacer

Pack of:
• One 4 mm ZrO₂ CRAMPS rotor
• Two 4 mm Kel-F drive caps
• One M2x25 cylindric screw
• One 4 mm CRAMPS PTFE spacer

Pack of:
• One 4 mm ZrO₂ HR MAS rotor (labeled)
• Three 4 mm Kel-F drive cap (H6304)
• One 4 mm 12 µL PTFE spacer
• One Kel-F thread pin (HZ04800)
• One M2x25 cylindric screw

For use with 4 mm HR-MAS rotor only (HZ05537, HZ05538, HZ07213) Material : PTFE , Sample Vol.: 12 µL, T° Range: (+10 to +50°C)