Search results for: 'teflon shape for 5 mm nmr tubes'

For use with 4 mm MAS rotor (H6283)

Each set contains:
• Ten Kel-F inserts
• Ten sealing screws
• Ten plugs
• One set of tools (Fork screwdriver, blunt-ended screwdriver, extraction screw)

For use with 3.2 mm Thin Wall MAS rotors (HZ16252)

For use with 3.2 mm Thick Bottom, Regular Wall MAS rotors (HZ09243)

For use with 3.2 mm Thin Wall MAS rotors (HZ16252)

Tool for cap removal for 3.2 mm Regular and Thin Wall MAS rotor

Pack of:
• One 3.2 mm Regular Wall ZrO₂ MAS rotor (HZ09244)
• Three 3.2 mm SP1 drive caps (HZ07306)

For use with 4 mm High Speed MAS rotor only. Please refer to item HZ12360 for regular 4mm SP1 cap

For use with 3.2 mm Thin Wall MAS rotors (HZ16252)
• T° Range: (-30 to +70°C)

Tools for cap positioning on 3.2 mm Regular Wall and Thin Wall MAS rotors

For use with 3.2 mm caps for Regular Wall rotor:
• SP1 drive cap (HZ07306)
• ZrO₂ drive cap (HZ12372)

Kit contains:
• Ten silicone soft plugs with silica tubing
• One 3.2mm soft plug depth gauge
• One 3.2mm soft plug removal tool

Pack of:
• One 3.2mm Thick Bottom, Regular Wall ZrO₂ MAS rotor (HZ09243)
• One 3.2mm SP1 drive cap (HZ07306)
• Two 3.2mm Kel-F drive cap (HZ07308)
• One PTFE spacer (HZ13618)

For use with 4 mm MAS rotor (H6283)

Each set contains:
• 100 Kel-F inserts
• 100 sealing screws
• 100 plugs
• One set of tools (Fork screwdriver, blunt-ended screwdriver, extraction screw)

For use with 4 mm MAS rotor (H6283)

Each set contains:
• 250 Kel-F inserts
• 250 sealing screws
• 250 plugs
• One set of tools (Fork screwdriver, blunt-ended screwdriver, extraction screw)

Has been replaced by Z119229

For moisture sensitive experiments

For use with CRAMPS rotor only

For use with CRAMPS rotor only

discontinued, please refer to H6304, HZ12360 or HZ05951 for alternative caps

Please consult product number HZ16916 or H12135 as an alternative

For use with CRAMPS rotor only

Includes :
• Cap Removal Tool
• Filling Tool
• Sample Packer
• Cap Set Tool
• Tool Insert

Tools for cap positioning on 4 mm MAS rotors

Has been replaced by HZ16913

Coded caps for SampleJet use

For use with 4 mm HR-MAS rotor only (HZ05537, HZ05538, HZ07213) Material : PTFE , Sample Vol.: 12 µL, T° Range: (+10 to +50°C)

For use with 4 mm HR-MAS rotor only (HZ07213)

Pack of:
• One 50 µL HR-MAS PTFE insert
• One M2x2 Kel-F thread pin (HZ04800)
• One M2x25 cylindric screw

For use with 4 mm HR-MAS rotor only (HZ05537, HZ05538)

Pack of:
• One 12 µL HR-MAS PTFE insert
• One M2x2 Kel-F MAS thread pin (HZ04800)
• One M2x25 cylindric screw

For use with 4 mm HR-MAS rotor only (HZ05537, HZ05538)

Pack of:
• One 12 µL HR-MAS Kel-F insert
• One M2x2 Kel-F MAS thread pin (HZ04800)
• One M2x25 cylindric screw

Contains 50 silicone plugs, 50 FKM plugs and a set of tools

For use with 50 µL HR-MAS rotor only (HZ07213)
Kit contains:
• One extration tool
• One scredriver
• One depth gauge

• Ideal for storing, freezing and tracking samples
• Sturdy anodized aluminum construction render this rack autoclavable and resistant to commonly used chemicals

For use with 4mm HR-MAS rotor only (HZ05537, HZ05538, HZ07213)