NMR Consumables

Tool for cap removal from 7 mm MAS rotor

For use with 7 mm CRAMPS rotor only

Tool for sample loading into 7 mm MAS rotor

For moisture sensitive experiments

Tool for sample compression into 7 mm MAS rotor

Pack of:
• One 7 mm ZrO₂ CRAMPS rotor
• Two 7 mm Kel-F drive caps without hole
• One cylindric screw M2x25
• One 7 mm CRAMPS Kel-F spacer

Pack of:
• One 7 mm ZrO₂ MAS rotor
• One 7 mm SP1 drive cap with hole
• One 7 mm Kel-F drive cap without hole
• One 7 mm Kel-F drive cap with hole

Pack of:
• One 7 mm ZrO₂ rotor
• Three 7 mm Kel-F drive caps without hole

Pack of:
• One 7 mm ZrO₂ rotor
• One 7 mm ZrO₂ drive cap

• Box of 550 tubes
• Caps not included

• Box of 550 tubes
• Caps included

• Ideal for storing, freezing and tracking samples
• Sturdy anodized aluminum construction render this rack autoclavable and resistant to commonly used chemicals

Tools for cap positioning on 4 mm MAS rotors

Tools for cap positioning on 7 mm MAS rotors

• Replaces Part Number Z117724
• Pack of 100 certified tubes
• 103.5 mm (4") long tubes
• For routine use in SampleJet racks
• Includes 100 coded caps without holes

• Replaces Part Number Z117559
• Pack of 100 certified tubes
• 178 mm (7") long tubes
• For routine use
• Includes 100 coded caps without holes

• Replaces Part Number Z117777
• Pack of 100 certified tubes
• 103.5 mm (4") long tubes
• For routine use in SampleJet racks
• Includes 100 coded caps without holes

• Replaces Part Number Z107373
• Pack of 100 certified tubes
• 178 mm (7") long tubes
• For routine use
• Includes 100 coded caps without holes

For use with 3.2 mm caps for Regular Wall rotor:
• SP1 drive cap (HZ07306)
• ZrO₂ drive cap (HZ12372)

Pack of:
• One 2.5 mm Regular Wall ZrO₂ MAS rotor (HZ05165)
• Two 2.5 mm SP1 bottom caps for Regular Wall rotor (HZ05267)
• Two 2.5 mm SP1 drive caps for Regular Wall rotors (HZ05269)

Individual 3.2 mm Thick Bottom, Regular Wall ZrO₂ MAS rotor (no caps included)
For use with 3.2 mm caps for Regular Wall rotor:
• SP1 drive cap (HZ07306)
• Kel-F drive cap (HZ07308)

Pack of:
• One 3.2 mm Regular Wall ZrO₂ MAS rotor (HZ09244)
• Three 3.2 mm SP1 drive caps (HZ07306)

Please consult product number HZ16916 or H12135 as an alternative

Has been replaced by HZ16913

Has been replaced by Z119229

For use with 4 mm HR-MAS rotor only (HZ05537, HZ05538, HZ07213) Material : PTFE , Sample Vol.: 12 µL, T° Range: (+10 to +50°C)

Contains 50 silicone plugs, 50 FKM plugs and a set of tools

For use with 4 mm MAS rotor (H6283)

Each set contains:
• Ten Kel-F inserts
• Ten sealing screws
• Ten plugs
• One set of tools (Fork screwdriver, blunt-ended screwdriver, extraction screw)

For use with 4 mm MAS rotor (H6283)

Each set contains:
• 100 Kel-F inserts
• 100 sealing screws
• 100 plugs
• One set of tools (Fork screwdriver, blunt-ended screwdriver, extraction screw)

For use with 4 mm MAS rotor (H6283)

Each set contains:
• 250 Kel-F inserts
• 250 sealing screws
• 250 plugs
• One set of tools (Fork screwdriver, blunt-ended screwdriver, extraction screw)

Kit contains:
• Five Shaped tubes (Z106898)
• One shuttle for shaped tube (Z75327)
• Five caps for shaped tube (Z107144)

For use with 0.7 mm MAS rotor

For use with 4mm HR-MAS rotor only (HZ05537, HZ05538, HZ07213)

Includes :
• Cap Removal Tool
• Filling Tool
• Sample Packer
• Cap Set Tool
• Tool Insert

Kit contains:
• 3.2 mm cap remover for Thin Wall rotor
• 3.2 mm filling funnel for Thin Wall rotor
• 3.2 mm cap set tool for Thin Wall rotor
• 3.2 mm packer for Thin Wall rotor

For use with 50 µL HR-MAS rotor only (HZ07213)
Kit contains:
• One extration tool
• One scredriver
• One depth gauge