Search results for: '542-PP-7 5 mm Thin Wall Precision NMR Sample Tube 7" L, 1000 MHz'

Tool for sample compression into 7 mm MAS rotor

Tool for sample compression into 2.5 mm Thin Wall MAS rotor

Tool for sample loading into 7 mm MAS rotor

Tool for sample compression into 2.5 mm Regular Wall MAS rotor

Tool for sample compression into 3.2 mm Regular Wall MAS rotor

Tool for sample loading into 2.5 mm Thin Wall MAS rotor

Tool for cap removal from 7 mm MAS rotor

Tool for sample compression into 4 mm MAS rotor

Tool for sample compression into 1.3 mm MAS rotor

Tool for sample compression into 1.9 mm MAS rotor

Pack of:
• One 7 mm ZrO₂ rotor
• One 7 mm ZrO₂ drive cap

For use with 7 mm CRAMPS rotor only

Pack of:
• One 7 mm ZrO₂ rotor
• Three 7 mm Kel-F drive caps without hole

Pack of:
• One 7 mm ZrO₂ MAS rotor
• One 7 mm SP1 drive cap with hole
• One 7 mm Kel-F drive cap without hole
• One 7 mm Kel-F drive cap with hole

Pack of:
• One 2.5 mm Thin Wall ZrO₂ MAS rotor
• Two 2.5 mm SP1 bottom caps for Thin Wall rotor (HZ06694)
• Two 2.5mm SP1 drive caps for Thin Wall rotor (HZ06693)

Pack of:
• One 7 mm ZrO₂ CRAMPS rotor
• Two 7 mm Kel-F drive caps without hole
• One cylindric screw M2x25
• One 7 mm CRAMPS Kel-F spacer

Tools for cap positioning on 7 mm MAS rotors

Kit contains:
• 3.2 mm cap remover for Thin Wall rotor
• 3.2 mm filling funnel for Thin Wall rotor
• 3.2 mm cap set tool for Thin Wall rotor
• 3.2 mm packer for Thin Wall rotor

Pack of
• One 3.2 mm thin wall MAS rotor
• Three SP1 drive caps

Tool for cap removal from 2.5 mm Thin Wall MAS rotor

For use with 2.5 mm Thin Wall MAS rotors (HZ15196)

For use with 2.5 mm Thin Wall MAS rotors (HZ15196)

For use with 3.2 mm Thin Wall MAS rotors (HZ16252)

Tools for cap positioning on 2.5 mm Regular Wall and Thin Wall MAS rotors

For use with 3.2 mm Thin Wall MAS rotors (HZ16252)

Tool for cap removal for 3.2 mm Regular and Thin Wall MAS rotor

Tools for cap positioning on 3.2 mm Regular Wall and Thin Wall MAS rotors

Tool for sample loading into 2.5 mm Regular Wall MAS rotor

For use with 3.2 mm Thin Wall MAS rotors (HZ16252)
• T° Range: (-30 to +70°C)

Tool for sample loading into 3.2 mm Regular Wall MAS rotor

Pack of:
• One 2.5 mm Regular Wall ZrO₂ MAS rotor (HZ05165)
• Two 2.5 mm SP1 bottom caps for Regular Wall rotor (HZ05267)
• Two 2.5 mm SP1 drive caps for Regular Wall rotors (HZ05269)

For moisture sensitive experiments

For use with regular wall 2.5 mm MAS rotors (HZ05165)
Sample Volume: about 8 µL

For use with 2.5 mm caps for Regular Wall MAS rotors:
• HZ05269 (SP1 drive cap)
• HZ05276 (SP1 bottom cap)

Individual 3.2 mm Thick Bottom, Regular Wall ZrO₂ MAS rotor (no caps included)
For use with 3.2 mm caps for Regular Wall rotor:
• SP1 drive cap (HZ07306)
• Kel-F drive cap (HZ07308)

For use with regular wall 2.5 mm MAS rotors (HZ05165)
Length: 2 mm

For use with regular wall 2.5 mm MAS rotors (HZ05165)
Length: 2 mm

Includes :
• Cap Removal Tool
• Filling Tool
• Sample Packer
• Cap Set Tool
• Tool Insert

Tool for cap removal from 2.5 mm Regular Wall MAS rotor

For use with 3.2 mm Thick Bottom, Regular Wall MAS rotors (HZ09243)

Tool for sample loading into 4 mm MAS rotor

Tool for sample loading into 1.3 mm MAS rotor

Tool for sample loading into 1.9 mm MAS rotor

For use with:
• 3.2 mm Regular Wall rotor (HZ09244)
• 3.2 mm sapphire rotor (B6939)

Please consult product number HZ16916 or H12135 as an alternative

For use with 3.2 mm caps for Regular Wall rotor:
• SP1 drive cap (HZ07306)
• ZrO₂ drive cap (HZ12372)

• Individual 4 mm Si₃N₄ MAS rotor (no caps included)
• For use with 4 mm caps: ZrO₂ drive cap (HZ05951)

For use with 3.2 mm caps for Regular Wall rotor:
• SP1 drive cap (HZ07306)
• ZrO₂ drive cap (HZ12372)

Pack of:
• One 3.2 mm sapphire rotor (B6939)
• One 3.2 mm SP1 drive cap (HZ07306)
• Two 3.2 mm ZrO₂ drive caps (HZ12372)

Pack of:
• One 3.2mm Thick Bottom, Regular Wall ZrO₂ MAS rotor (HZ09243)
• One 3.2mm SP1 drive cap (HZ07306)
• Two 3.2mm Kel-F drive cap (HZ07308)
• One PTFE spacer (HZ13618)

Pack of:
• One 4 mm ZrO₂ HR MAS rotor (labeled)
• Three 4 mm Kel-F drive cap (H6304)
• One 4 mm 12 µL PTFE spacer
• One Kel-F thread pin (HZ04800)
• One M2x25 cylindric screw

Pack of:
• One 4 mm ZrO₂ HR MAS rotor (labeled)
• Three 4 mm Kel-F drive cap (H6304)
• One 4 mm 50 µL PTFE spacer
• One Kel-F thread pin (HZ04800)
• One M2x25 cylindric screw

Pack of :
• One 1.3 mm ZrO₂ MAS rotor
• Two 1.3 mm SP1 bottom cap (HZ08194)
• Two 1.3 mm SP1 drive caps (HZ14381)

Pack of:
• One 4 mm ZrO₂ HR MAS rotor (labeled)
• Three 4 mm Kel-F drive cap (H6304)
• One 4 mm 12 µL Kel-F spacer
• One Kel-F thread pin (HZ04800)
• One M2x25 cylindric screw

For use with 0.7 mm MAS rotor

For use with 0.7 mm MAS rotor

0.7mm ZrO₂ rotor tested with Vespel caps

Each kit includes:
• One 0.7 mm MAS rotor
• Four 0.7 mm SP1 drive caps
• Four 0.7 mm SP1 bottom caps

For Low Temperature NMR Experiments

Pack of:
• One 1.9 mm ZrO₂ MAS rotor
• Two tight fit 1.9 mm SP1 bottom caps (HZ16789)
• Two tight fit 1.9 mm SP1 drive caps (H122284)

Pack of:
• One 1.9 mm ZrO₂ MAS rotor
• Two 1.9 mm SP1 bottom caps (HZ16789)
• Two 1.9 mm SP1 drive caps (H122284)

Individual 4 mm sapphire rotor (no caps included)
For use with 4 mm caps:
• SP1 drive cap (HZ12360)
• ZrO₂ drive cap (HZ05951)

Pack of:
• One 4 mm ZrO₂ MAS rotor (H6283)
• One 4 mm ZrO₂ drive cap (HZ05951)
• One 4 mm Kel-F drive cap (H6304)

4 mm ZrO₂ MAS rotors (no caps included)
For use with 4 mm caps:
• Kel-F drive cap (H6304)
• SP1 drive cap (HZ12360)
• ZrO₂ drive cap (HZ05951)

Pack of:
• One 4 mm ZrO₂ MAS rotor (H6283)
• Three 4 mm Kel-F drive caps (H6304)

Pack of:
• One 4 mm ZrO₂ MAS rotor (H6283)
• Two 4 mm Kel-F drive caps (H6304)
• One 4 mm SP1 drive caps (HZ12360)

Tool for cap removal from 1.3 mm MAS rotor

For use with 1.3 mm MAS rotor

For use with 1.3 mm MAS rotor

Pack of:
• One 4 mm ZrO₂ CRAMPS rotor
• Two 4 mm Kel-F drive caps
• One M2x25 cylindric screw
• One 4 mm CRAMPS PE spacer

Pack of:
• One 4 mm ZrO₂ CRAMPS rotor
• Two 4 mm Kel-F drive caps
• One M2x25 cylindric screw
• One 4 mm CRAMPS PTFE spacer

Pack of:
• One 4 mm ZrO₂ CRAMPS rotor
• Two 4 mm Kel-F drive caps
• One M2x25 cylindric screw
• One 4 mm CRAMPS Kel-F spacer

Kit contains:
• Ten silicone soft plugs with silica tubing
• One 3.2mm soft plug depth gauge
• One 3.2mm soft plug removal tool

Has been replaced by HZ16913

Pack of:
• One 3.2 mm Regular Wall ZrO₂ MAS rotor (HZ09244)
• Three 3.2 mm SP1 drive caps (HZ07306)

For use with:
• 4 mm ZrO₂ MAS rotor (H6283)
• 4 mm sapphire MAS rotor (H8932)
• 4 mm Si₃N₄ MAS rotors (K1911)

For use with:
• 4 mm ZrO₂ MAS rotor (H6283)
• 4 mm sapphire MAS rotor (H8932)
• 4 mm ZrO₂ HR-MAS rotors (HZ05537, HZ05528, HZ07213)

For use with 4 mm HR-MAS rotor only (HZ05537, HZ05538, HZ07213) Material : PTFE , Sample Vol.: 12 µL, T° Range: (+10 to +50°C)

Tool for cap removal from 4 mm MAS rotor

Tool for cap removal from 1.9 mm MAS rotor

For use with 1.9 mm MAS rotor

For use with 1.9 mm MAS rotor

For use with:
• 4 mm MAS rotor (H6283)
• 4 mm HR-MAS rotors (HZ05537, HZ05528, HZ07213)

Tools for cap positioning on 1.3 mm MAS rotor

Tools for cap positioning on 1.9 mm MAS rotor

For use with 4 mm MAS rotor (H6283)

Each set contains:
• Ten Kel-F inserts
• Ten sealing screws
• Ten plugs
• One set of tools (Fork screwdriver, blunt-ended screwdriver, extraction screw)

For use with 4 mm High Speed MAS rotor only. Please refer to item HZ12360 for regular 4mm SP1 cap

For use with 4 mm MAS rotor (H6283)

Each set contains:
• 100 Kel-F inserts
• 100 sealing screws
• 100 plugs
• One set of tools (Fork screwdriver, blunt-ended screwdriver, extraction screw)

For use with 4 mm MAS rotor (H6283)

Each set contains:
• 250 Kel-F inserts
• 250 sealing screws
• 250 plugs
• One set of tools (Fork screwdriver, blunt-ended screwdriver, extraction screw)

For use with CRAMPS rotor only

For use with CRAMPS rotor only

discontinued, please refer to H6304, HZ12360 or HZ05951 for alternative caps

For use with CRAMPS rotor only

• Ideal for storing, freezing and tracking samples
• Sturdy anodized aluminum construction render this rack autoclavable and resistant to commonly used chemicals

Tools for cap positioning on 4 mm MAS rotors

For use with 4 mm HR-MAS rotor only (HZ07213)

Pack of:
• One 50 µL HR-MAS PTFE insert
• One M2x2 Kel-F thread pin (HZ04800)
• One M2x25 cylindric screw

For use with 4 mm HR-MAS rotor only (HZ05537, HZ05538)

Pack of:
• One 12 µL HR-MAS PTFE insert
• One M2x2 Kel-F MAS thread pin (HZ04800)
• One M2x25 cylindric screw

For use with 4 mm HR-MAS rotor only (HZ05537, HZ05538)

Pack of:
• One 12 µL HR-MAS Kel-F insert
• One M2x2 Kel-F MAS thread pin (HZ04800)
• One M2x25 cylindric screw

Contains 50 silicone plugs, 50 FKM plugs and a set of tools

For use with 50 µL HR-MAS rotor only (HZ07213)
Kit contains:
• One extration tool
• One scredriver
• One depth gauge

For use with 4mm HR-MAS rotor only (HZ05537, HZ05538, HZ07213)