Search results for: 'the dbms_pipe.receive_message can 98 cap 98 ca 98 15'

Tool for cap removal from 1.3 mm MAS rotor

Pack of :
• One 1.3 mm ZrO₂ MAS rotor
• Two 1.3 mm SP1 bottom cap (HZ08194)
• Two 1.3 mm SP1 drive caps (HZ14381)

Tool for cap removal from 4 mm MAS rotor

Tool for cap removal from 1.9 mm MAS rotor

Pack of:
• One 4 mm ZrO₂ MAS rotor (H6283)
• One 4 mm ZrO₂ drive cap (HZ05951)
• One 4 mm Kel-F drive cap (H6304)

discontinued, please refer to H6304, HZ12360 or HZ05951 for alternative caps

Pack of:
• One 4 mm ZrO₂ MAS rotor (H6283)
• Two 4 mm Kel-F drive caps (H6304)
• One 4 mm SP1 drive caps (HZ12360)

Pack of:
• One 4 mm ZrO₂ MAS rotor (H6283)
• Three 4 mm Kel-F drive caps (H6304)

Coded caps for use with SampleJet system

For use with 1.3 mm MAS rotor

For use with 1.3 mm MAS rotor

Tool for cap removal from 2.5 mm Thin Wall MAS rotor

Tool for cap removal from 2.5 mm Regular Wall MAS rotor

Tool for cap removal for 3.2 mm Regular and Thin Wall MAS rotor

Pack of:
• One 1.9 mm ZrO₂ MAS rotor
• Two 1.9 mm SP1 bottom caps (HZ16789)
• Two 1.9 mm SP1 drive caps (H122284)

Pack of:
• One 7 mm ZrO₂ MAS rotor
• One 7 mm SP1 drive cap with hole
• One 7 mm Kel-F drive cap without hole
• One 7 mm Kel-F drive cap with hole

For Low Temperature NMR Experiments

Pack of:
• One 1.9 mm ZrO₂ MAS rotor
• Two tight fit 1.9 mm SP1 bottom caps (HZ16789)
• Two tight fit 1.9 mm SP1 drive caps (H122284)

For use with:
• 4 mm ZrO₂ MAS rotor (H6283)
• 4 mm sapphire MAS rotor (H8932)
• 4 mm Si₃N₄ MAS rotors (K1911)

For use with:
• 4 mm ZrO₂ MAS rotor (H6283)
• 4 mm sapphire MAS rotor (H8932)
• 4 mm ZrO₂ HR-MAS rotors (HZ05537, HZ05528, HZ07213)

For use with:
• 4 mm MAS rotor (H6283)
• 4 mm HR-MAS rotors (HZ05537, HZ05528, HZ07213)

Pack of:
• One 4 mm ZrO₂ CRAMPS rotor
• Two 4 mm Kel-F drive caps
• One M2x25 cylindric screw
• One 4 mm CRAMPS PE spacer

Pack of:
• One 4 mm ZrO₂ CRAMPS rotor
• Two 4 mm Kel-F drive caps
• One M2x25 cylindric screw
• One 4 mm CRAMPS PTFE spacer

Tool for cap removal from 7 mm MAS rotor

Pack of:
• One 2.5 mm Regular Wall ZrO₂ MAS rotor (HZ05165)
• Two 2.5 mm SP1 bottom caps for Regular Wall rotor (HZ05267)
• Two 2.5 mm SP1 drive caps for Regular Wall rotors (HZ05269)

Pack of:
• One 4 mm ZrO₂ CRAMPS rotor
• Two 4 mm Kel-F drive caps
• One M2x25 cylindric screw
• One 4 mm CRAMPS Kel-F spacer

Pack of
• One 3.2 mm thin wall MAS rotor
• Three SP1 drive caps

Tools for cap positioning on 1.3 mm MAS rotor

Tools for cap positioning on 1.9 mm MAS rotor

For reference standard samples

Pack of:
• One 3.2mm Thick Bottom, Regular Wall ZrO₂ MAS rotor (HZ09243)
• One 3.2mm SP1 drive cap (HZ07306)
• Two 3.2mm Kel-F drive cap (HZ07308)
• One PTFE spacer (HZ13618)

Pack of:
• One 7 mm ZrO₂ CRAMPS rotor
• Two 7 mm Kel-F drive caps without hole
• One cylindric screw M2x25
• One 7 mm CRAMPS Kel-F spacer

Pack of:
• One 3.2 mm sapphire rotor (B6939)
• One 3.2 mm SP1 drive cap (HZ07306)
• Two 3.2 mm ZrO₂ drive caps (HZ12372)

Tools for cap positioning on 4 mm MAS rotors

Has been replaced by HZ16913

• Box of 400 tubes
• Caps included

• Box of 100 tubes
• Caps included

• Box of 30 tubes
• Caps included

• Box of 9 tubes
• Caps included

• Box of 550 tubes
• Caps included

Tools for cap positioning on 7 mm MAS rotors

Pack of:
• One 4 mm ZrO₂ HR MAS rotor (labeled)
• Three 4 mm Kel-F drive cap (H6304)
• One 4 mm 12 µL PTFE spacer
• One Kel-F thread pin (HZ04800)
• One M2x25 cylindric screw

Pack of:
• One 4 mm ZrO₂ HR MAS rotor (labeled)
• Three 4 mm Kel-F drive cap (H6304)
• One 4 mm 50 µL PTFE spacer
• One Kel-F thread pin (HZ04800)
• One M2x25 cylindric screw

Pack of:
• One 7 mm ZrO₂ rotor
• One 7 mm ZrO₂ drive cap

Pack of:
• One 4 mm ZrO₂ HR MAS rotor (labeled)
• Three 4 mm Kel-F drive cap (H6304)
• One 4 mm 12 µL Kel-F spacer
• One Kel-F thread pin (HZ04800)
• One M2x25 cylindric screw

Coded caps for SampleJet use

Pack of:
• One 2.5 mm Thin Wall ZrO₂ MAS rotor
• Two 2.5 mm SP1 bottom caps for Thin Wall rotor (HZ06694)
• Two 2.5mm SP1 drive caps for Thin Wall rotor (HZ06693)

Pack of:
• One 7 mm ZrO₂ rotor
• Three 7 mm Kel-F drive caps without hole

For use with 4 mm High Speed MAS rotor only. Please refer to item HZ12360 for regular 4mm SP1 cap

Tools for cap positioning on 3.2 mm Regular Wall and Thin Wall MAS rotors

Tools for cap positioning on 2.5 mm Regular Wall and Thin Wall MAS rotors

For use with 1.9 mm MAS rotor

For use with 1.9 mm MAS rotor

For use with 0.7 mm MAS rotor

For use with 0.7 mm MAS rotor

Individual 4 mm sapphire rotor (no caps included)
For use with 4 mm caps:
• SP1 drive cap (HZ12360)
• ZrO₂ drive cap (HZ05951)

4 mm ZrO₂ MAS rotors (no caps included)
For use with 4 mm caps:
• Kel-F drive cap (H6304)
• SP1 drive cap (HZ12360)
• ZrO₂ drive cap (HZ05951)

Please consult product number HZ16916 or H12135 as an alternative

• Individual 4 mm Si₃N₄ MAS rotor (no caps included)
• For use with 4 mm caps: ZrO₂ drive cap (HZ05951)

For use with regular wall 2.5 mm MAS rotors (HZ05165)
Length: 2 mm

For use with regular wall 2.5 mm MAS rotors (HZ05165)
Length: 2 mm

For use with 2.5 mm Thin Wall MAS rotors (HZ15196)

For use with 2.5 mm Thin Wall MAS rotors (HZ15196)

For use with:
• 3.2 mm Regular Wall MAS rotors (HZ09244)
• 3.2 mm sapphire rotor (B6939)
• T° Range: (-30 to +70°C)

For use with:
• 3.2 mm Regular Wall rotor (HZ09244)
• 3.2 mm sapphire rotor (B6939)

For use with 3.2 mm Thin Wall MAS rotors (HZ16252)

For use with 3.2 mm Thin Wall MAS rotors (HZ16252)
• T° Range: (-30 to +70°C)

For use with 3.2 mm Thin Wall MAS rotors (HZ16252)

For use with regular wall 2.5 mm MAS rotors (HZ05165)
Sample Volume: about 8 µL

Pack of:
• One 3.2 mm Regular Wall ZrO₂ MAS rotor (HZ09244)
• Three 3.2 mm SP1 drive caps (HZ07306)

For use with 3.2 mm caps for Regular Wall rotor:
• SP1 drive cap (HZ07306)
• ZrO₂ drive cap (HZ12372)

For use with 3.2 mm caps for Regular Wall rotor:
• SP1 drive cap (HZ07306)
• ZrO₂ drive cap (HZ12372)

For use with 2.5 mm caps for Regular Wall MAS rotors:
• HZ05269 (SP1 drive cap)
• HZ05276 (SP1 bottom cap)

Individual 3.2 mm Thick Bottom, Regular Wall ZrO₂ MAS rotor (no caps included)
For use with 3.2 mm caps for Regular Wall rotor:
• SP1 drive cap (HZ07306)
• Kel-F drive cap (HZ07308)

Includes :
• Cap Removal Tool
• Filling Tool
• Sample Packer
• Cap Set Tool
• Tool Insert

0.7mm ZrO₂ rotor tested with Vespel caps

Each kit includes:
• One 0.7 mm MAS rotor
• Four 0.7 mm SP1 drive caps
• Four 0.7 mm SP1 bottom caps

• Box of 550 tubes
• Caps not included

• Box of 400 tubes
• Caps not included

• Box of 100 tubes
• Caps not included

• Box of 30 tubes
• Caps not included

• Box of 9 tubes
• Caps not included

Kit contains:
• 3.2 mm cap remover for Thin Wall rotor
• 3.2 mm filling funnel for Thin Wall rotor
• 3.2 mm cap set tool for Thin Wall rotor
• 3.2 mm packer for Thin Wall rotor

Kit contains:
• Five Shaped tubes (Z106898)
• One shuttle for shaped tube (Z75327)
• Five caps for shaped tube (Z107144)

• Replaces Part Number Z117559
• Pack of 100 certified tubes
• 178 mm (7") long tubes
• For routine use
• Includes 100 coded caps without holes

• Replaces Part Number Z107373
• Pack of 100 certified tubes
• 178 mm (7") long tubes
• For routine use
• Includes 100 coded caps without holes

• Replaces Part Number Z117724
• Pack of 100 certified tubes
• 103.5 mm (4") long tubes
• For routine use in SampleJet racks
• Includes 100 coded caps without holes

• Replaces Part Number Z117777
• Pack of 100 certified tubes
• 103.5 mm (4") long tubes
• For routine use in SampleJet racks
• Includes 100 coded caps without holes