NMR & Analytical

0.7mm ZrO₂ rotor tested with Vespel caps

Each kit includes:
• One 0.7 mm MAS rotor
• Four 0.7 mm SP1 drive caps
• Four 0.7 mm SP1 bottom caps

For use with 0.7 mm MAS rotor

Tool for cap removal from 1.3 mm MAS rotor

Tools for cap positioning on 1.3 mm MAS rotor

Tool for sample loading into 1.3 mm MAS rotor

Tool for sample compression into 1.3 mm MAS rotor

Shuttle to hold 1.7 mm tubes for use with SampleJet system

Tool for cap removal from 1.9 mm MAS rotor

Tools for cap positioning on 1.9 mm MAS rotor

Tool for sample loading into 1.9 mm MAS rotor

Tool for sample compression into 1.9 mm MAS rotor

For use with 1.9 mm MAS rotor

For Low Temperature NMR Experiments

Pack of:
• One 1.9 mm ZrO₂ MAS rotor
• Two tight fit 1.9 mm SP1 bottom caps (HZ16789)
• Two tight fit 1.9 mm SP1 drive caps (H122284)

40% Dioxane in Benzene-d₆

85% Hexamethyldisiloxan (HMDSO) in Benzene-d₆

For use with 4 mm HR-MAS rotor only (HZ05537, HZ05538)

Pack of:
• One 12 µL HR-MAS Kel-F insert
• One M2x2 Kel-F MAS thread pin (HZ04800)
• One M2x25 cylindric screw

Tool for cap removal from 2.5 mm Regular Wall MAS rotor

Tool for cap removal from 2.5 mm Thin Wall MAS rotor

Tool for sample loading into 2.5 mm Regular Wall MAS rotor

Tool for sample loading into 2.5 mm Thin Wall MAS rotor

For use with 2.5 mm caps for Regular Wall MAS rotors:
• HZ05269 (SP1 drive cap)
• HZ05276 (SP1 bottom cap)

Tool for sample compression into 2.5 mm Regular Wall MAS rotor

Tool for sample compression into 2.5 mm Thin Wall MAS rotor

For use with 2.5 mm Thin Wall MAS rotors (HZ15196)

For use with regular wall 2.5 mm MAS rotors (HZ05165)
Length: 2 mm

For use with 2.5 mm Thin Wall MAS rotors (HZ15196)

4% Methanol (CH₃OH) in Methanol-d₄

Tools for cap positioning on 3.2 mm Regular Wall and Thin Wall MAS rotors

Tool for sample loading into 3.2 mm Regular Wall MAS rotor

For use with 3.2 mm Thin Wall MAS rotors (HZ16252)

Tool for cap removal for 3.2 mm Regular and Thin Wall MAS rotor

Tool for sample compression into 3.2 mm Regular Wall MAS rotor

For use with 3.2 mm Thin Wall MAS rotors (HZ16252)
• T° Range: (-30 to +70°C)

For use with 3.2 mm Thin Wall MAS rotors (HZ16252)

For use with:
• 3.2 mm Regular Wall rotor (HZ09244)
• 3.2 mm sapphire rotor (B6939)

Tool for cap removal from 4 mm MAS rotor

For use with CRAMPS rotor only

For use with CRAMPS rotor only

• Individual 4 mm Si₃N₄ MAS rotor (no caps included)
• For use with 4 mm caps: ZrO₂ drive cap (HZ05951)

For use with 4 mm High Speed MAS rotor only. Please refer to item HZ12360 for regular 4mm SP1 cap

For use with:
• 4 mm ZrO₂ MAS rotor (H6283)
• 4 mm sapphire MAS rotor (H8932)
• 4 mm Si₃N₄ MAS rotors (K1911)

Pack of:
• One 4 mm ZrO₂ HR MAS rotor (labeled)
• Three 4 mm Kel-F drive cap (H6304)
• One 4 mm 12 µL Kel-F spacer
• One Kel-F thread pin (HZ04800)
• One M2x25 cylindric screw

Pack of:
• One 4 mm ZrO₂ HR MAS rotor (labeled)
• Three 4 mm Kel-F drive cap (H6304)
• One 4 mm 12 µL PTFE spacer
• One Kel-F thread pin (HZ04800)
• One M2x25 cylindric screw

Pack of:
• One 4 mm ZrO₂ HR MAS rotor (labeled)
• Three 4 mm Kel-F drive cap (H6304)
• One 4 mm 50 µL PTFE spacer
• One Kel-F thread pin (HZ04800)
• One M2x25 cylindric screw

Pack of:
• One 4 mm ZrO₂ MAS rotor (H6283)
• One 4 mm ZrO₂ drive cap (HZ05951)
• One 4 mm Kel-F drive cap (H6304)

Pack of 10

1% Chloroform (CHCl₃) in Acetone-d₆

85% Hexamethyldisiloxan (HMDSO) in Benzene-d₆

2 mM Sucrose, 0.5 mM DSS, 2 mM NaN₃ in D₂O/H₂O 10/90

Shuttle to hold 5.0 mm tubes for use with SampleJet system

For use with 4 mm HR-MAS rotor only (HZ07213)

Pack of:
• One 50 µL HR-MAS PTFE insert
• One M2x2 Kel-F thread pin (HZ04800)
• One M2x25 cylindric screw

Tool for cap removal from 7 mm MAS rotor

For moisture sensitive experiments

Pack of:
• One 7 mm ZrO₂ rotor
• One 7 mm ZrO₂ drive cap

Tools for cap positioning on 4 mm MAS rotors

• Replaces Part Number Z117559
• Pack of 100 certified tubes
• 178 mm (7") long tubes
• For routine use
• Includes 100 coded caps without holes

• Replaces Part Number Z107373
• Pack of 100 certified tubes
• 178 mm (7") long tubes
• For routine use
• Includes 100 coded caps without holes

Has been replaced by HZ16913

For use with 4 mm HR-MAS rotor only (HZ05537, HZ05538, HZ07213) Material : PTFE , Sample Vol.: 12 µL, T° Range: (+10 to +50°C)

For use with 0.7 mm MAS rotor

For use with 50 µL HR-MAS rotor only (HZ07213)
Kit contains:
• One extration tool
• One scredriver
• One depth gauge