Search results for: 'protein quantitative nmr sail'

5 mm gradient recovery reference tube

Z10083

$234.30

3-6 weeks

0.1 mg GDCl₃/mL D₂O with 1% H₂O + 0.1% CH₃OH ¹³C

10 mm gradient recovery reference tube

Z10085

$295.50

3-6 weeks

0.1 mg GDCl₃/mL D₂O with 1% H₂O + 0.1% CH₃OH ¹³C

1 mm lineshape reference tube

Z100926

$230.50

3-6 weeks

3% Chloroform (CHCl₃) in Acetone-d₆

5 mm 2D experiments calibration tube

Z10093

$389.80

3-6 weeks

25 mM Cyclosporin in Benzene-d₆

1 mm water suppression reference tube

Z100930

$230.50

3-6 weeks

10 mM Sucrose, 0.5 mM DSS, 2 mM NaN₃ in D₂O/H₂O 10/90

1 mm pulse calibration tube

Z100932

$230.50

3-6 weeks

100 mM ¹⁵N-enriched Urea, 100 mM ¹³C-enriched Methanol in DMSO-d₆

1 mm gradient recovery reference tube

Z100933

$230.50

3-6 weeks

0.1 mg GDCl₃/mL D₂O with 1% H₂O + 0.1% CH₃OH ¹³C

1 mm 31P sensitivity reference tube

Z100934

$162.00

3-6 weeks

0.0485 M Triphenylphosphat (TPP) in Acetone-d₆

10 mm 2D experiments calibration tube

Z10095

$373.30

3-6 weeks

25 mM Cyclosporin in Benzene-d₆

5 mm 31P sensitivity reference tube

Z10201

$253.50

3-6 weeks

0.0485 M Triphenylphosphate (TPP) in Acetone-d₆

10 mm 31P sensitivity reference tube

Z10202

$411.60

3-6 weeks

0.0485 M Triphenylphosphate (TPP) in Acetone-d₆

5 mm 29Si sensitivity reference tube

Z10209

$253.50

3-6 weeks

85% Hexamethyldisiloxan (HMDSO) in Benzene-d₆

10 mm 29Si sensitivity reference tube

Z10210

$441.30

3-6 weeks

85% Hexamethyldisiloxan (HMDSO) in Benzene-d₆

5 mm 19F sensitivity reference tube

Z10234

$253.50

3-6 weeks

0.05% Trifluorotoluene (TFT) in Chloroform-d

10 mm 19F sensitivity reference tube

Z10235

$441.30

3-6 weeks

0.05% Trifluorotoluene (TFT) in Chloroform-d

5 mm water suppression reference tube

Z10246

$234.30

3-6 weeks

2 mM Sucrose, 0.5 mM DSS, 2 mM NaN₃ in D₂O/H₂O 10/90

5 mm 1H lineshape reference tube (1% Chloroform)

Z10248

$253.50

3-6 weeks

1% Chloroform (CHCl₃) in Acetone-d₆

10 mm 1H lineshape reference tube (1% Chloroform)

Z10250

$672.50

3-6 weeks

1% Chloroform (CHCl₃) in Acetone-d₆

5 mm pulse calibration tube

Z10263

$293.40

3-6 weeks

100 mM ¹⁵N-enriched Urea, 100 mM ¹³C-enriched Methanol in DMSO-d₆

10 mm pulse calibration tube

Z10265

$548.40

3-6 weeks

100 mM ¹⁵N-enriched Urea, 100 mM ¹³C-enriched Methanol in DMSO-d₆

10 mm water suppression reference tube

Z10268

$356.60

3-6 weeks

2 mM Sucrose, 0.5 mM DSS, 2 mM NaN₃ in D₂O/H₂O 10/90

5 mm 1D NOE Diff. reference tube

Z10298

$356.60

3-6 weeks

100 mg Pamoic acid/mL DMSO-d₆ + 1% TMS

1.7 mm 31P sensitivity reference tube

Z10722

$281.40

3-6 weeks

0.0485 M Triphenylphosphate (TPP) in Acetone-d₆

1.7 mm gradient recovery reference tube

Z10727

$230.50

3-6 weeks

0.1 mg GDCl₃/mL D₂O with 1% H₂O + 0.1% CH₃OH ¹³C

1.7 mm 19F sensitivity reference tube

Z10728

$281.40

3-6 weeks

0.05% Trifluorotoluene (TFT) in Chloroform-d

1 mm 1H sensitivity reference tube

Z100927

$230.50

3-6 weeks

0.1% Ethylbenzene (EB) in Chloroform-d

5 mm long time experiment calibration tube

Z10159

$257.90

3-6 weeks

100 mg Cholesterylactetate + 0.5% TMS in Chloroform-d (100 mg Cholac)

10 mm long time experiment calibration tube

Z10160

$443.90

3-6 weeks

100 mg Cholesterylactetate + 0.5% TMS in Chloroform-d (100 mg Cholac)

1.7 mm 1H lineshape reference tube

Z10717

$249.80

3-6 weeks

1% Chloroform (CHCl₃) in Acetone-d₆

1.7 mm 13C sensitivity & 1H decoupling reference tube

Z10723

$249.80

3-6 weeks

10% Ethylbenzene (EB) in Chloroform-d

3 mm 13C sensitivity & 1H decoupling reference tube

Z10034

$441.30

3-6 weeks

10% Ethylbenzene (EB) in Chloroform-d

5 mm 13C sensitivity & 1H decoupling reference tube

Z10153

$253.50

3-6 weeks

10% Ethylbenzene (EB) in Chloroform-d

10 mm 13C sensitivity & 1H decoupling reference tube

Z10154

$541.60

3-6 weeks

10% Ethylbenzene (EB) in Chloroform-d

3 mm 13C sensitivity & resolution reference tube

Z10035

$441.30

3-6 weeks

40% Dioxane in Benzene-d₆

3 mm Room Temperature calibration tube

Z10053

$389.80

3-6 weeks

99.8% Methanol-d₄

5 mm 13C sensitivity & resolution reference tube

Z10163

$253.50

3-6 weeks

40% Dioxane in Benzene-d₆

10 mm 13C sensitivity & resolution reference tube

Z10164

$541.80

3-6 weeks

40% Dioxane in Benzene-d₆

5 mm Room Temperature calibration tube

Z10627

$253.50

3-6 weeks

99.8% Methanol-d₄

10 mm Room Temperature calibration tube

Z10628

$555.70

3-6 weeks

99.8% Methanol-d₄

1.7 mm water suppression reference tube for Cryoprobes (2 mM sucrose)

Z10719

$230.50

3-6 weeks

2 mM Sucrose, 0.5 mM DSS, 2 mM NaN₃ in D₂O/H₂O 10/90

1.7 mm 15N & 13C pulse calibration tube

Z10721

$230.50

3-6 weeks

100 mM ¹⁵N-enriched Urea, 100 mM ¹³C-enriched Methanol in DMSO-d₆

1.7 mm 13C sensitivity & resolution reference tube (ASTM)

Z10724

$249.80

3-6 weeks

40% Dioxane in Benzene-d₆

1.7 mm Room Temperature calibration tube

Z10734

$281.40

3-6 weeks

99.8% Methanol-d₄

5 mm water suppression reference tube for Cryoprobes

Z10902

$293.40

3-6 weeks

2 mM Sucrose, 0.5 mM DSS, 2 mM NaN₃ in D₂O/H₂O 10/90

3 mm 15N sensitivity & 13C pulse calibration reference tube

Z10039

$293.40

3-6 weeks

90% Formamide in DMSO-d₆

3 mm low temperature calibration tube

Z10043

$389.80

3-6 weeks

4% Methanol (CH₃OH) in Methanol-d₄

3 mm high temperature calibration tube

Z10044

$459.30

3-6 weeks

80% Glycol in DMSO-d₆

3 mm water suppression for 2D experiments reference tube

Z10048

$480.30

3-6 weeks

2 mM Lysozyme in H₂O/D₂O 90/10

5 mm low temperature calibration tube

Z10127

$253.50

3-6 weeks

4% Methanol (CH₃OH) in Methanol-d₄

10 mm low temperature calibration tube

Z10128

$486.80

3-6 weeks

4% Methanol (CH₃OH) in Methanol-d₄

5 mm high temperature calibration tube

Z10129

$234.30

3-6 weeks

80% Glycol in DMSO-d₆

10 mm high temperature calibration tube

Z10130

$433.70

3-6 weeks

80% Glycol in DMSO-d₆

5 mm 15N sensitivity & 13C pulse calibration tube

Z10187

$229.80

3-6 weeks

90% Formamide in DMSO-d₆

10 mm 15N sensitivity & 13C pulse calibration reference tube

Z10188

$382.50

3-6 weeks

90% Formamide in DMSO-d₆

1.7 mm water suppression reference tube for RT probes (10 mM sucrose)

Z10720

$230.50

3-6 weeks

10 mM Sucrose, 0.5 mM DSS, 2 mM NaN₃ in D₂O/H₂O 10/90

Combination pH electrode with BNC connector (also known as #5 connector)

6030-02-BNC

$1,419.60

2-4 weeks

For use in 5mm thin walled NMR tubes up to 8 inches in length

Clear Labels for 5 mm NMR Tubes, Roll of 500

NE-7407

$61.10

3 - 4 weeks

5 mm water suppression for 2D experiments reference tube (> 700 MHz)

Z10907

$360.20

3-6 weeks

2 mM Lysozyme in H₂O/D₂O 90/10

3 mm 1H lineshape reference tube (3% Chloroform)

Z10031

$327.40

3-6 weeks

3% Chloroform (CHCl₃) 0.2% TMS in Acetone-d₆

5 mm 1H lineshape reference tube (3% Chloroform)

Z10230

$254.30

3-6 weeks

3% Chloroform (CHCl₃) 0.2% TMS in Acetone-d₆

10 mm 1H lineshape reference tube (3% Chloroform)

Z10231

$472.10

3-6 weeks

3% Chloroform (CHCl₃) in Acetone-d₆

10 mm Controlled Atmosphere Valve Quartz NMR Tube (300-400 MHz)

NE-CAV10-Q-170
2 - 3 weeks

5 mm Controlled Atmosphere Valve Quartz NMR Tube (300-400 MHz)

NE-CAV5-Q-170
2 - 3 weeks

5 mm lineshape reference tube (0.3% Chloroform, > 700 MHz)

Z10701

$334.50

3-6 weeks

0.3% Chloroform (CHCl₃) in Acetone-d₆, 40 mm height filling

10 mm lineshape reference tube (0.3% Chloroform) for Cryoprobes

Z10702

$510.50

2-3 weeks

0.3% Chloroform (CHCl₃) in Acetone-d₆, 40 mm height filling

10 mm Thin Wall Pressure Valve Pyrex NMR Tube (300-400 MHz)

NE-PCAV10-170
2 - 3 weeks

10 mm Heavy Wall Pressure Valve Pyrex NMR Tube (300-400 MHz)

NE-PCAV10-H-170
2 - 3 weeks

10 mm Medium Wall Pressure Valve Pyrex NMR Tube (300-400 MHz)

NE-PCAV10-M-170
2 - 3 weeks

5 mm Thin Wall Pressure Valve Pyrex NMR Tube (300-400 MHz)

NE-PCAV5-170
2 - 3 weeks

5 mm Heavy Wall Pressure Valve Pyrex NMR Tube (300-400 MHz)

NE-PCAV5-H-170
2 - 3 weeks

5 mm Medium Wall Pressure Valve Pyrex NMR Tube (300-400 MHz)

NE-PCAV5-M-170
2 - 3 weeks

10 mm PTFE liner, 8"

NE-350-10

$37.10

3 - 4 weeks

• Compatible with New Era 10 mm O.D. 7" NMR Tube
• 1 tube liner with PTFE plug

5 mm PTFE liner, 8"

NE-350-5

$14.70

3 - 4 weeks

• Compatible with New Era 5 mm O.D. 7" NMR Tube
• 1 tube liner with PTFE plug

10 mm Thin Wall Controlled Atmosphere Valve Pyrex NMR Tube (300-500 MHz)

NE-CAV10-170
2 - 3 weeks

10 mm Heavy Wall Controlled Atmosphere Valve Pyrex NMR Tube (300-500 MHz)

NE-CAV10-H-170
2 - 3 weeks

10 mm Medium Wall Controlled Atmosphere Valve Pyrex NMR Tube (300-500 MHz)

NE-CAV10-M-170
2 - 3 weeks

5 mm Thin Wall Controlled Atmosphere Valve Pyrex NMR Tube (300-400 MHz)

NE-CAV5-170
2 - 3 weeks

5 mm Heavy Wall Controlled Atmosphere Valve Pyrex NMR Tube (300-400 MHz)

NE-CAV5-H-170
2 - 3 weeks

5 mm Medium Wall Controlled Atmosphere Valve Pyrex NMR Tube (300-400 MHz)

NE-CAV5-M-170
2 - 3 weeks

PTFE Support Cap

NE-312-5-GT

$15.00

4 - 6 weeks

To secure support rod

Ultem End Gel Plug

NE-370-A-5
4 - 6 weeks

For use with Agilent and Jeol Probes

Buna-N O-Ring, 5 mm

NE-370-A-5-O
4 - 6 weeks

For End Gel Plug

Ultem End Gel Plug, Short

NE-370-A-5-S
4 - 6 weeks

For use with Bruker Probes

Ultem Top Gel Plug

NE-370-B-5
4 - 6 weeks

Extraction Rod, Brass

NE-371
4 - 6 weeks

For Extraction of End Plug

Brass Piston Driver

NE-372-A
4 - 6 weeks

For all gel chambers

Brass Cap

NE-372-B
4 - 6 weeks

For all gel chambers

PTFE Piston with Buna-N O-Ring, 5 mm

NE-372-C-5
4 - 6 weeks

Fits gel chamber NE-372-D-5

PTFE Piston with Buna-N O-Ring, 5.4 mm

NE-372-C-5.4
4 - 6 weeks

Fits gel chamber NE-372-C-5.4

Buna-N O-Ring, 5.4 mm

NE-372-C-5.4-O
4 - 6 weeks

For Piston NE-372-C-5.4

Buna-N O-Ring, 5 mm

NE-372-C-5-O
4 - 6 weeks

PTFE Piston with Buna-N O-Ring, 6 mm

NE-372-C-6
4 - 6 weeks

Fits gel chamber NE-372-D-6

Buna-N O-Ring, 6 mm

NE-372-C-6-O
4 - 6 weeks

For Piston NE-372-C-6

PTFE Gel Chamber, 5 mm

NE-372-D-5
4 - 6 weeks

For casting 5 mm gels

PTFE Gel Chamber, 5.4 mm

NE-372-D-5.4
4 - 6 weeks

For casting 5.4 mm gels

PTFE Gel Chamber, 6 mm

NE-372-D-6
4 - 6 weeks

For casting 6 mm gels

PTFE Funnel

NE-372-E-5
4 - 6 weeks

For stretch from 5 mm to 4.2 mm

PTFE Funnel

NE-372-E-5.4
4 - 6 weeks

For stretch from 5.4 mm to 4.2 mm

PTFE Funnel

NE-372-E-6
4 - 6 weeks

For stretch from 6 mm to 4.2 mm

Complete Compression Gel Device

NE-375-5

$494.10

4 - 6 weeks

Includes 1 Sample Tube NE-UP5-CGT

Compression Adapter, 2-pieces

NE-375-5-A

$246.70

4 - 6 weeks

PTFE Plunger with thread and brass pin

NE-375-5-B

$174.40

4 - 6 weeks

PTFE Lock Nut

NE-375-5-C

$33.20

4 - 6 weeks

Shigemi Slot Tubes kit

SBMS-K

$1,830.00

2-4 weeks

Kit contains:
• Five Shigemi Slot Tubes (SBMS)
• One shuttle for Slot Tube (Z137538)

2 mm Red Caps, Pack of 25

521-T

$9.90

2-4 weeks

Material: Polyethylene

5 mm Aqua Caps, Pack of 100

521-AQA-100

$13.50

2-4 weeks

Material: Polyethylene

5 mm Aqua Caps, Pack of 1000

521-AQA-1000

$66.20

2-4 weeks

Material: Polyethylene

5 mm Black Caps, Pack of 100

521-BLK-100

$9.90

2-4 weeks

Material: Polyethylene

5 mm Black Caps, Pack of 1000

521-BLK-1000

$70.60

2-4 weeks

Material: Polyethylene

5 mm Blue Caps, Pack of 100

521-BLU-100

$9.80

2-4 weeks

Material: Polyethylene

5 mm Blue Caps, Pack of 1000

521-BLU-1000

$63.60

2-4 weeks

Material: Polyethylene

5 mm Fuschia Caps, Pack of 100

521-FUH-100

$12.80

2-4 weeks

Material: Polyethylene

5 mm Fuschia Caps, Pack of 1000

521-FUH-1000

$72.20

2-4 weeks

Material: Polyethylene

5 mm Green Caps, Pack of 100

521-GRN-100

$9.90

2-4 weeks

Material: Polyethylene

5 mm Green Caps, Pack of 1000

521-GRN-1000

$63.60

2-4 weeks

Material: Polyethylene

5 mm Orange Caps, Pack of 100

521-ORG-100

$11.50

2-4 weeks

Material: Polyethylene

5 mm Orange Caps, Pack of 1000

521-ORG-1000

$64.70

2-4 weeks

Material: Polyethylene

3 mm Red Caps, Pack of 100

521-P-100

$13.40

2-4 weeks

Material: Polyethylene

5 mm Pink Caps, Pack of 100

521-PNK-100

$11.80

2-4 weeks

Material: Polyethylene

5 mm Pink Caps, Pack of 1000

521-PNK-1000

$64.70

2-4 weeks

Material: Polyethylene

5 mm Purple Caps, Pack of 100

521-PUR-100

$11.50

2-4 weeks

Material: Polyethylene

5 mm Purple Caps, Pack of 1000

521-PUR-1000

$64.70

2-4 weeks

Material: Polyethylene

5 mm Red Caps, Pack of 100

521-RED-100

$9.80

2-4 weeks

Material: Polyethylene

5 mm Red Caps, Pack of 1000

521-RED-1000

$63.60

2-4 weeks

Material: Polyethylene

2.5 mm Red Caps, Pack of 25

521-U

$10.00

2-4 weeks

Material: Polyethylene

5 mm White Caps, Pack of 100

521-WHT-100

$9.80

2-4 weeks

Material: Polyethylene

5 mm White Caps, Pack of 1000

521-WHT-1000

$58.80

2-4 weeks

Material: Polyethylene

5 mm Yellow Caps, Pack of 100

521-YLW-100

$9.80

2-4 weeks

Material: Polyethylene

5 mm Yellow Caps, Pack of 1000

521-YLW-1000

$62.50

2-4 weeks

Material: Polyethylene

Shuttle for Shigemi Slot Tube

Z137538

$467.30

2-3 weeks

5 mm Assorted Color Caps, Pack of 100

521-ASST-100

$9.60

2-4 weeks

Material: Polyethylene

5 mm Assorted Color Caps, Pack of 1000

521-ASST-1000

$59.90

2-4 weeks

Material: Polyethylene

10 mm Green Caps, Pack of 100

521-C-GRN-100

$12.90

2-4 weeks

Material: Polyethylene

5 mm Sky Blue Caps, Pack of 100

521-SKY-100

$14.60

2-4 weeks

Material: Polyethylene

5 mm Sky Blue Caps, Pack of 1000

521-SKY-1000

$66.20

2-4 weeks

Material: Polyethylene

5 mm Caps w/Hole (521-99010153-100)

521-WGS-100
2-4 weeks

Material: Polyethylene

Shaped Tubes kit

Z119964

$2,084.20

3-6 weeks

Kit contains:
• Five Shaped tubes (Z106898)
• One shuttle for shaped tube (Z75327)
• Five caps for shaped tube (Z107144)

Complete Gel Press System, 5.4 mm

NE-372-5.4/4.2
4 - 6 weeks

Includes:
• Piston Driver
• Cap
• Piston
• Gel Chamber
• Funnel

Complete Gel Press System, 5 mm

NE-372-5/4.2
4 - 6 weeks

Includes:
• Piston Driver
• Cap
• Piston
• Gel Chamber
• Funnel

Complete Gel Press System, 6 mm

NE-372-6/4.2
4 - 6 weeks

Includes:
• Piston Driver
• Cap
• Piston
• Gel Chamber
• Funnel

Shaped Tube

Z106898

$381.10

Stock

5 mm Gel Sample Tube, 7" (700 MHz)

NE-UP5-CGT

$26.00

4 - 6 weeks

Tube Only

3 mm and 5 mm SampleJet Reference cap

Z130278

$246.90

3-6 weeks

For reference standard samples

n-dodecyl b-D-maltopyranoside-d25 (DDM-d25)

CD5066P025

$2,860.00

4 - 8 weeks

• 250 mg
• Deuteration: 98 %
• Chemical purity > 99 %

3.2 mm Thin Wall ZrO2 MAS rotor + open one end, + caps

HZ16916

$2,262.00

1-3 weeks

Pack of
• One 3.2 mm thin wall MAS rotor
• Three SP1 drive caps

3.2 mm SP1 bottom cap for Thin Wall rotor

HZ16254

$289.40

3-6 weeks

For use with 3.2 mm Thin Wall MAS rotors (HZ16252)
• T° Range: (-30 to +70°C)

DISCONTINUTED (replaced by HZ16913) - 3.2 mm cap remover for Regular Wall rotor

HZ07410
3-6 weeks

Has been replaced by HZ16913

Brukers set of SFC calibration standards

E1201050

$2,171.90

2-3 weeks

Tool Kit for 3.2 mm Thin Wall rotor

B136904

$1,082.20

Stock

Kit contains:
• 3.2 mm cap remover for Thin Wall rotor
• 3.2 mm filling funnel for Thin Wall rotor
• 3.2 mm cap set tool for Thin Wall rotor
• 3.2 mm packer for Thin Wall rotor

Tool Kit for 50 mL HR-MAS rotor

B2950

$61.00

3-6 weeks

For use with 50 µL HR-MAS rotor only (HZ07213)
Kit contains:
• One extration tool
• One scredriver
• One depth gauge

Set of 10 Kel-F inserts for 4 mm MAS rotor

B4493

$339.70

1 - 3 weeks

For use with 4 mm MAS rotor (H6283)

Each set contains:
• Ten Kel-F inserts
• Ten sealing screws
• Ten plugs
• One set of tools (Fork screwdriver, blunt-ended screwdriver, extraction screw)

96 slots storage rack for Kel-F inserts

B5771

$709.10

3-6 weeks

• Ideal for storing, freezing and tracking samples
• Sturdy anodized aluminum construction render this rack autoclavable and resistant to commonly used chemicals

50 µL PTFE spacer

H11087

$261.30

3-6 weeks

For use with 4 mm HR-MAS rotor only (HZ07213)

Pack of:
• One 50 µL HR-MAS PTFE insert
• One M2x2 Kel-F thread pin (HZ04800)
• One M2x25 cylindric screw

Discontinued - Please consult product number HZ16916 as an alternative

H12135
1-3 weeks

Pack of:
• One 3.2 mm Regular Wall ZrO₂ MAS rotor (HZ09244)
• Three 3.2 mm SP1 drive caps (HZ07306)

1.9 mm SP1 drive cap

H122284

$317.00

1-3 weeks

For use with 1.9 mm MAS rotor

1.9 mm ZrO2 MAS rotor + caps

H123832

$3,306.00

1-3 weeks

Pack of:
• One 1.9 mm ZrO₂ MAS rotor
• Two 1.9 mm SP1 bottom caps (HZ16789)
• Two 1.9 mm SP1 drive caps (H122284)

7 mm ZrO2 rotor for laser heating

H128297

$3,127.70

1-3 weeks

2.5 mm cap remover for Thin Wall rotor

H13836

$1,566.10

3-6 weeks

Tool for cap removal from 2.5 mm Thin Wall MAS rotor

4 mm ZrO2 MAS rotor + Kel-F caps

H14355

$957.00

1-3 weeks

Pack of:
• One 4 mm ZrO₂ MAS rotor (H6283)
• Three 4 mm Kel-F drive caps (H6304)

4 mm ZrO2 MAS rotor + ZrO2 cap

H14356

$2,023.10

1-3 weeks

Pack of:
• One 4 mm ZrO₂ MAS rotor (H6283)
• One 4 mm ZrO₂ drive cap (HZ05951)
• One 4 mm Kel-F drive cap (H6304)

7 mm ZrO2 MAS rotor + Kel-F caps

H14357

$982.00

1-3 weeks

Pack of:
• One 7 mm ZrO₂ rotor
• Three 7 mm Kel-F drive caps without hole

7 mm ZrO2 MAS rotor + ZrO2 cap

H14358

$2,241.00

1-3 weeks

Pack of:
• One 7 mm ZrO₂ rotor
• One 7 mm ZrO₂ drive cap

Cap set tool for 4mm MAS rotor

H148486

$159.50

3-6 weeks

Tools for cap positioning on 4 mm MAS rotors

4 mm sample packer

H148513

$225.60

3-6 weeks

Tool for sample compression into 4 mm MAS rotor

7 mm sample packer

H148514

$214.30

3-6 weeks

Tool for sample compression into 7 mm MAS rotor

0.7 mm MAS rotor kit

H153268

$4,783.40

1-3 weeks

0.7mm ZrO₂ rotor tested with Vespel caps

Each kit includes:
• One 0.7 mm MAS rotor
• Four 0.7 mm SP1 drive caps
• Four 0.7 mm SP1 bottom caps

DISCONTINUED 3.2 mm Thin Wall ZrO2 MAS rotor, open on both ends + caps

H163649
1-3 weeks

Please consult product number HZ16916 or H12135 as an alternative

7 mm Kel-F drive cap with hole

H6244

$154.30

3-6 weeks

7 mm CRAMPS Kel-F spacer

H6250

$62.10

3-6 weeks

For use with 7 mm CRAMPS rotor only

7 mm Kel-F insert

H6251

$261.80

3-6 weeks

For moisture sensitive experiments

4 mm ZrO2 CRAMPS rotor with PE spacer + caps

H7358

$1,028.70

3-6 weeks

Pack of:
• One 4 mm ZrO₂ CRAMPS rotor
• Two 4 mm Kel-F drive caps
• One M2x25 cylindric screw
• One 4 mm CRAMPS PE spacer

4 mm ZrO2 CRAMPS rotor with Kel-F spacer + caps

H7359

$1,062.00

3-6 weeks

Pack of:
• One 4 mm ZrO₂ CRAMPS rotor
• Two 4 mm Kel-F drive caps
• One M2x25 cylindric screw
• One 4 mm CRAMPS Kel-F spacer

4 mm ZrO2 CRAMPS rotor with PTFE spacer + caps

H7360

$996.90

3-6 weeks

Pack of:
• One 4 mm ZrO₂ CRAMPS rotor
• Two 4 mm Kel-F drive caps
• One M2x25 cylindric screw
• One 4 mm CRAMPS PTFE spacer

DISCONTINUED - 2.5 mm Regular Wall ZrO2 MAS rotor + caps

H8416
1-3 weeks

Pack of:
• One 2.5 mm Regular Wall ZrO₂ MAS rotor (HZ05165)
• Two 2.5 mm SP1 bottom caps for Regular Wall rotor (HZ05267)
• Two 2.5 mm SP1 drive caps for Regular Wall rotors (HZ05269)

12 µL Kel-F spacer

H8548

$230.70

3-6 weeks

For use with 4 mm HR-MAS rotor only (HZ05537, HZ05538)

Pack of:
• One 12 µL HR-MAS Kel-F insert
• One M2x2 Kel-F MAS thread pin (HZ04800)
• One M2x25 cylindric screw

12 µL PTFE spacer

H8549

$229.30

3-6 weeks

For use with 4 mm HR-MAS rotor only (HZ05537, HZ05538)

Pack of:
• One 12 µL HR-MAS PTFE insert
• One M2x2 Kel-F MAS thread pin (HZ04800)
• One M2x25 cylindric screw

4 mm sapphire MAS rotor

H8932

$1,401.90

1-3 weeks

Individual 4 mm sapphire rotor (no caps included)
For use with 4 mm caps:
• SP1 drive cap (HZ12360)
• ZrO₂ drive cap (HZ05951)

Kel-F thread pin

HZ04800

$30.80

3-6 weeks

For use with 4 mm HR-MAS rotor only (HZ05537, HZ05538, HZ07213) Material : PTFE , Sample Vol.: 12 µL, T° Range: (+10 to +50°C)

Tool for HR-MAS spacer

HZ04875

$37.00

3-6 weeks

For use with 4mm HR-MAS rotor only (HZ05537, HZ05538, HZ07213)

2.5 mm Regular Wall ZrO2 MAS rotor

HZ05165

$1,194.00

1-3 weeks

For use with 2.5 mm caps for Regular Wall MAS rotors:
• HZ05269 (SP1 drive cap)
• HZ05276 (SP1 bottom cap)

2.5 mm SP1 drive cap for Regular Wall rotor

HZ05269

$310.20

Stock

For use with regular wall 2.5 mm MAS rotors (HZ05165)
Length: 2 mm

2.5 mm SP1 bottom cap for Regular Wall rotor

HZ05276

$211.80

Stock

For use with regular wall 2.5 mm MAS rotors (HZ05165)
Length: 2 mm

2.5 mm cap remover for Regular Wall rotor

HZ05503

$702.50

3-6 weeks

Tool for cap removal from 2.5 mm Regular Wall MAS rotor

2.5 mm filling tool for Regular Wall rotor

HZ05526

$41.70

3-6 weeks

Tool for sample loading into 2.5 mm Regular Wall MAS rotor

2.5 mm sample packer for Regular Wall rotor

HZ05528

$66.60

3-6 weeks

Tool for sample compression into 2.5 mm Regular Wall MAS rotor

4 mm ZrO2 HR-MAS rotor with 12 µL Kel-F spacer + caps

HZ05537

$1,127.00

Stock

Pack of:
• One 4 mm ZrO₂ HR MAS rotor (labeled)
• Three 4 mm Kel-F drive cap (H6304)
• One 4 mm 12 µL Kel-F spacer
• One Kel-F thread pin (HZ04800)
• One M2x25 cylindric screw

4 mm ZrO2 HR-MAS rotor with 12 µL PTFE spacer + caps

HZ05538

$1,157.40

Stock

Pack of:
• One 4 mm ZrO₂ HR MAS rotor (labeled)
• Three 4 mm Kel-F drive cap (H6304)
• One 4 mm 12 µL PTFE spacer
• One Kel-F thread pin (HZ04800)
• One M2x25 cylindric screw

4 mm cap remover

HZ05754

$747.60

3-6 weeks

Tool for cap removal from 4 mm MAS rotor

7 mm cap remover

HZ05755

$834.60

3-6 weeks

Tool for cap removal from 7 mm MAS rotor

4 mm ZrO2 drive cap

HZ05951

$1,265.40

Stock

For use with:
• 4 mm ZrO₂ MAS rotor (H6283)
• 4 mm sapphire MAS rotor (H8932)
• 4 mm Si₃N₄ MAS rotors (K1911)

4 mm SP1 cap for High Speed rotor

HZ06427

$339.60

Stock

For use with 4 mm High Speed MAS rotor only. Please refer to item HZ12360 for regular 4mm SP1 cap

2.5 mm SP1 drive cap for Thin Wall rotor

HZ06693

$529.50

1-3 weeks

For use with 2.5 mm Thin Wall MAS rotors (HZ15196)

2.5 mm SP1 bottom cap for Thin Wall rotor

HZ06694

$353.00

1-3 weeks

For use with 2.5 mm Thin Wall MAS rotors (HZ15196)

4 mm ZrO2 HR-MAS rotor with 50 µL PTFE spacer + caps

HZ07213

$1,127.00

Stock

Pack of:
• One 4 mm ZrO₂ HR MAS rotor (labeled)
• Three 4 mm Kel-F drive cap (H6304)
• One 4 mm 50 µL PTFE spacer
• One Kel-F thread pin (HZ04800)
• One M2x25 cylindric screw

3.2 mm sample packer for Regular Wall rotor

HZ07607

$148.30

3-6 weeks

Tool for sample compression into 3.2 mm Regular Wall MAS rotor

3.2 mm filling tool for Regular Wall rotor

HZ07608

$42.60

3-6 weeks

Tool for sample loading into 3.2 mm Regular Wall MAS rotor

1.3 mm SP1 bottom cap

HZ08194

$240.30

Stock

For use with 1.3 mm MAS rotor

4 mm SP1 drive cap

HZ12360

$217.50

1-3 weeks

For use with:
• 4 mm ZrO₂ MAS rotor (H6283)
• 4 mm sapphire MAS rotor (H8932)
• 4 mm ZrO₂ HR-MAS rotors (HZ05537, HZ05528, HZ07213)

3.2 mm PTFE Insert for Regular Wall rotor

HZ13618

$50.90

3-6 weeks

For use with 3.2 mm Thick Bottom, Regular Wall MAS rotors (HZ09243)

3.2 mm Thick Bottom, Regular Wall ZrO2 MAS rotor + caps + PTFE spacer

HZ13706

$1,684.40

1-3 weeks

Pack of:
• One 3.2mm Thick Bottom, Regular Wall ZrO₂ MAS rotor (HZ09243)
• One 3.2mm SP1 drive cap (HZ07306)
• Two 3.2mm Kel-F drive cap (HZ07308)
• One PTFE spacer (HZ13618)