Solid State NMR & DNP

0.7mm ZrO₂ rotor tested with Vespel caps

Each kit includes:
• One 0.7 mm MAS rotor
• Four 0.7 mm SP1 drive caps
• Four 0.7 mm SP1 bottom caps

For use with 0.7 mm MAS rotor

Tool for cap removal from 1.3 mm MAS rotor

Tools for cap positioning on 1.3 mm MAS rotor

Tool for sample loading into 1.3 mm MAS rotor

Tool for sample compression into 1.3 mm MAS rotor

For use with 1.3 mm MAS rotor

Pack of :
• One 1.3 mm ZrO₂ MAS rotor
• Two 1.3 mm SP1 bottom cap (HZ08194)
• Two 1.3 mm SP1 drive caps (HZ14381)

Tool for cap removal from 1.9 mm MAS rotor

Tools for cap positioning on 1.9 mm MAS rotor

Tool for sample loading into 1.9 mm MAS rotor

Tool for sample compression into 1.9 mm MAS rotor

For use with 1.9 mm MAS rotor

For use with 1.9 mm MAS rotor

For Low Temperature NMR Experiments

Pack of:
• One 1.9 mm ZrO₂ MAS rotor
• Two tight fit 1.9 mm SP1 bottom caps (HZ16789)
• Two tight fit 1.9 mm SP1 drive caps (H122284)

Pack of:
• One 1.9 mm ZrO₂ MAS rotor
• Two 1.9 mm SP1 bottom caps (HZ16789)
• Two 1.9 mm SP1 drive caps (H122284)

For use with 4 mm HR-MAS rotor only (HZ05537, HZ05538)

Pack of:
• One 12 µL HR-MAS Kel-F insert
• One M2x2 Kel-F MAS thread pin (HZ04800)
• One M2x25 cylindric screw

Tool for cap removal from 2.5 mm Regular Wall MAS rotor

Tool for cap removal from 2.5 mm Thin Wall MAS rotor

Tools for cap positioning on 2.5 mm Regular Wall and Thin Wall MAS rotors

Tool for sample loading into 2.5 mm Regular Wall MAS rotor

Tool for sample loading into 2.5 mm Thin Wall MAS rotor

For use with 2.5 mm caps for Regular Wall MAS rotors:
• HZ05269 (SP1 drive cap)
• HZ05276 (SP1 bottom cap)

Tool for sample compression into 2.5 mm Regular Wall MAS rotor

Tool for sample compression into 2.5 mm Thin Wall MAS rotor

For use with regular wall 2.5 mm MAS rotors (HZ05165)
Length: 2 mm

For use with 2.5 mm Thin Wall MAS rotors (HZ15196)

For use with regular wall 2.5 mm MAS rotors (HZ05165)
Length: 2 mm

For use with regular wall 2.5 mm MAS rotors (HZ05165)
Sample Volume: about 8 µL

For use with 2.5 mm Thin Wall MAS rotors (HZ15196)

Pack of:
• One 2.5 mm Thin Wall ZrO₂ MAS rotor
• Two 2.5 mm SP1 bottom caps for Thin Wall rotor (HZ06694)
• Two 2.5mm SP1 drive caps for Thin Wall rotor (HZ06693)

Tools for cap positioning on 3.2 mm Regular Wall and Thin Wall MAS rotors

Tool for sample loading into 3.2 mm Regular Wall MAS rotor

For use with 3.2 mm Thin Wall MAS rotors (HZ16252)

For use with 3.2 mm Thick Bottom, Regular Wall MAS rotors (HZ09243)

Tool for cap removal for 3.2 mm Regular and Thin Wall MAS rotor

Tool for sample compression into 3.2 mm Regular Wall MAS rotor

Pack of:
• One 3.2 mm sapphire rotor (B6939)
• One 3.2 mm SP1 drive cap (HZ07306)
• Two 3.2 mm ZrO₂ drive caps (HZ12372)

For use with 3.2 mm caps for Regular Wall rotor:
• SP1 drive cap (HZ07306)
• ZrO₂ drive cap (HZ12372)

Kit contains:
• Ten silicone soft plugs with silica tubing
• One 3.2mm soft plug depth gauge
• One 3.2mm soft plug removal tool

For use with 3.2 mm Thin Wall MAS rotors (HZ16252)
• T° Range: (-30 to +70°C)

For use with 3.2 mm Thin Wall MAS rotors (HZ16252)

Pack of
• One 3.2 mm thin wall MAS rotor
• Three SP1 drive caps

For use with:
• 3.2 mm Regular Wall rotor (HZ09244)
• 3.2 mm sapphire rotor (B6939)

Tool for cap removal from 4 mm MAS rotor

For use with CRAMPS rotor only

For use with CRAMPS rotor only

For use with CRAMPS rotor only

Tool for sample compression into 4 mm MAS rotor

• Individual 4 mm Si₃N₄ MAS rotor (no caps included)
• For use with 4 mm caps: ZrO₂ drive cap (HZ05951)

For use with 4 mm High Speed MAS rotor only. Please refer to item HZ12360 for regular 4mm SP1 cap

For use with:
• 4 mm ZrO₂ MAS rotor (H6283)
• 4 mm sapphire MAS rotor (H8932)
• 4 mm ZrO₂ HR-MAS rotors (HZ05537, HZ05528, HZ07213)

For use with:
• 4 mm ZrO₂ MAS rotor (H6283)
• 4 mm sapphire MAS rotor (H8932)
• 4 mm Si₃N₄ MAS rotors (K1911)

Pack of:
• One 4 mm ZrO₂ HR MAS rotor (labeled)
• Three 4 mm Kel-F drive cap (H6304)
• One 4 mm 12 µL Kel-F spacer
• One Kel-F thread pin (HZ04800)
• One M2x25 cylindric screw

Pack of:
• One 4 mm ZrO₂ HR MAS rotor (labeled)
• Three 4 mm Kel-F drive cap (H6304)
• One 4 mm 12 µL PTFE spacer
• One Kel-F thread pin (HZ04800)
• One M2x25 cylindric screw

Pack of:
• One 4 mm ZrO₂ HR MAS rotor (labeled)
• Three 4 mm Kel-F drive cap (H6304)
• One 4 mm 50 µL PTFE spacer
• One Kel-F thread pin (HZ04800)
• One M2x25 cylindric screw

4 mm ZrO₂ MAS rotors (no caps included)
For use with 4 mm caps:
• Kel-F drive cap (H6304)
• SP1 drive cap (HZ12360)
• ZrO₂ drive cap (HZ05951)

Pack of:
• One 4 mm ZrO₂ MAS rotor (H6283)
• Two 4 mm Kel-F drive caps (H6304)
• One 4 mm SP1 drive caps (HZ12360)

Pack of:
• One 4 mm ZrO₂ MAS rotor (H6283)
• Three 4 mm Kel-F drive caps (H6304)

Pack of:
• One 4 mm ZrO₂ MAS rotor (H6283)
• One 4 mm ZrO₂ drive cap (HZ05951)
• One 4 mm Kel-F drive cap (H6304)

For use with 4 mm HR-MAS rotor only (HZ07213)

Pack of:
• One 50 µL HR-MAS PTFE insert
• One M2x2 Kel-F thread pin (HZ04800)
• One M2x25 cylindric screw

Tool for cap removal from 7 mm MAS rotor

For moisture sensitive experiments

Pack of:
• One 7 mm ZrO₂ MAS rotor
• One 7 mm SP1 drive cap with hole
• One 7 mm Kel-F drive cap without hole
• One 7 mm Kel-F drive cap with hole

Pack of:
• One 7 mm ZrO₂ rotor
• One 7 mm ZrO₂ drive cap

Tools for cap positioning on 4 mm MAS rotors

For use with 3.2 mm caps for Regular Wall rotor:
• SP1 drive cap (HZ07306)
• ZrO₂ drive cap (HZ12372)

Individual 3.2 mm Thick Bottom, Regular Wall ZrO₂ MAS rotor (no caps included)
For use with 3.2 mm caps for Regular Wall rotor:
• SP1 drive cap (HZ07306)
• Kel-F drive cap (HZ07308)

Has been replaced by HZ16913

For use with 4 mm HR-MAS rotor only (HZ05537, HZ05538, HZ07213) Material : PTFE , Sample Vol.: 12 µL, T° Range: (+10 to +50°C)

Contains 50 silicone plugs, 50 FKM plugs and a set of tools

For use with 4 mm MAS rotor (H6283)

Each set contains:
• Ten Kel-F inserts
• Ten sealing screws
• Ten plugs
• One set of tools (Fork screwdriver, blunt-ended screwdriver, extraction screw)

For use with 4 mm MAS rotor (H6283)

Each set contains:
• 100 Kel-F inserts
• 100 sealing screws
• 100 plugs
• One set of tools (Fork screwdriver, blunt-ended screwdriver, extraction screw)

For use with 4 mm MAS rotor (H6283)

Each set contains:
• 250 Kel-F inserts
• 250 sealing screws
• 250 plugs
• One set of tools (Fork screwdriver, blunt-ended screwdriver, extraction screw)

For use with 0.7 mm MAS rotor

For use with 50 µL HR-MAS rotor only (HZ07213)
Kit contains:
• One extration tool
• One scredriver
• One depth gauge