Solid State NMR & DNP
0.7 mm MAS rotor kit
H153268€3,615.00stock0.7mm ZrO2 rotor tested with Vespel caps
Each kit includes:
• One 0.7 mm MAS rotor
• Four 0.7 mm SP1 drive caps
• Four 0.7 mm SP1 bottom caps1.3 mm ZrO2 MAS rotor + caps
HZ14752€2,593.40stockPack of :
• One 1.3 mm ZrO2 MAS rotor
• Two 1.3 mm SP1 bottom cap (HZ08194)
• Two 1.3 mm SP1 drive caps (HZ14381)1.9 mm ZrO2 MAS rotor (Tight Fit) + caps
H123832-01€3,379.60stockFor Low Temperature NMR Experiments
Pack of:
• One 1.9 mm ZrO2 MAS rotor
• Two tight fit 1.9 mm SP1 bottom caps (HZ16789)
• Two tight fit 1.9 mm SP1 drive caps (H122284)1.9 mm ZrO2 MAS rotor + caps
H123832€2,463.70stockPack of:
• One 1.9 mm ZrO2 MAS rotor
• Two 1.9 mm SP1 bottom caps (HZ16789)
• Two 1.9 mm SP1 drive caps (H122284)12 µL Kel-F spacer
H8548€184.203-6 weeksFor use with 4 mm HR-MAS rotor only (HZ05537, HZ05538)
Pack of:
• One 12 µL HR-MAS Kel-F insert
• One M2x2 Kel-F MAS thread pin (HZ04800)
• One M2x25 cylindric screw12 µL PTFE spacer
H8549€185.303-6 weeksFor use with 4 mm HR-MAS rotor only (HZ05537, HZ05538)
Pack of:
• One 12 µL HR-MAS PTFE insert
• One M2x2 Kel-F MAS thread pin (HZ04800)
• One M2x25 cylindric screw2.5 mm cap remover for Regular Wall rotor
HZ05503€581.203-6 weeksTool for cap removal from 2.5 mm Regular Wall MAS rotor2.5 mm cap remover for Thin Wall rotor
H13836€1,167.103-6 weeksTool for cap removal from 2.5 mm Thin Wall MAS rotor2.5 mm cap set tool for Regular and Thin Wall rotors
HZ16624€68.503-6 weeksTools for cap positioning on 2.5 mm Regular Wall and Thin Wall MAS rotors2.5 mm filling tool for Regular Wall rotor
HZ05526€34.303-6 weeksTool for sample loading into 2.5 mm Regular Wall MAS rotor2.5 mm filling tool for Thin Wall rotor
HZ15199€34.303-6 weeksTool for sample loading into 2.5 mm Thin Wall MAS rotor2.5 mm Regular Wall ZrO2 MAS rotor
HZ05165€837.90stockFor use with 2.5 mm caps for Regular Wall MAS rotors:
• HZ05269 (SP1 drive cap)
• HZ05276 (SP1 bottom cap)2.5 mm Regular Wall ZrO2 MAS rotor + caps
H8416€1,470.20stockPack of:
• One 2.5 mm Regular Wall ZrO2 MAS rotor (HZ05165)
• Two 2.5 mm SP1 bottom caps for Regular Wall rotor (HZ05267)
• Two 2.5 mm SP1 drive caps for Regular Wall rotors (HZ05269)2.5 mm sample packer for Regular Wall rotor
HZ05528€50.003-6 weeksTool for sample compression into 2.5 mm Regular Wall MAS rotor2.5 mm sample packer for Thin Wall rotor
HZ15198€116.503-6 weeksTool for sample compression into 2.5 mm Thin Wall MAS rotor2.5 mm SP1 bottom cap for Regular Wall rotor
HZ05276€158.90StockFor use with regular wall 2.5 mm MAS rotors (HZ05165)
Length: 2 mm2.5 mm SP1 bottom cap for Thin Wall rotor
HZ06694€264.70StockFor use with 2.5 mm Thin Wall MAS rotors (HZ15196)2.5 mm SP1 drive cap for Regular Wall rotor
HZ05269€232.60StockFor use with regular wall 2.5 mm MAS rotors (HZ05165)
Length: 2 mm2.5 mm SP1 drive cap for Regular Wall rotor (long stem)
HZ12600€144.802-3 weeksFor use with regular wall 2.5 mm MAS rotors (HZ05165)
Sample Volume: about 8 µL2.5 mm SP1 drive cap for Thin Wall rotor
HZ06693€397.00StockFor use with 2.5 mm Thin Wall MAS rotors (HZ15196)2.5 mm Thin Wall ZrO2 MAS rotor + caps
HZ15196€1,426.40stockPack of:
• One 2.5 mm Thin Wall ZrO2 MAS rotor
• Two 2.5 mm SP1 bottom caps for Thin Wall rotor (HZ06694)
• Two 2.5mm SP1 drive caps for Thin Wall rotor (HZ06693)3.2 mm cap set tool for Regular and Thin Wall rotors
HZ16621€44.503-6 weeksTools for cap positioning on 3.2 mm Regular Wall and Thin Wall MAS rotors3.2 mm filling tool for Regular Wall rotor
HZ07608€33.103-6 weeksTool for sample loading into 3.2 mm Regular Wall MAS rotor3.2 mm Kel-F drive cap for Thin Wall rotor
HZ16908€200.70StockFor use with 3.2 mm Thin Wall MAS rotors (HZ16252)3.2 mm PTFE Insert for Regular Wall rotor
HZ13618€40.903-6 weeksFor use with 3.2 mm Thick Bottom, Regular Wall MAS rotors (HZ09243)3.2 mm Regular and Thin Wall rotor cap remover
HZ16913€751.602-3 weeksTool for cap removal for 3.2 mm Regular and Thin Wall MAS rotor3.2 mm Regular Wall ZrO2 MAS rotor
HZ09244€1,169.90stockIndividual 3.2 mm Regular Wall ZrO2 MAS rotor (no caps included)
For use with 3.2 mm caps for Regular Wall rotor:
• SP1 drive cap (HZ07306)
• Kel-F drive cap (HZ07308)3.2 mm Regular Wall ZrO2 MAS rotor + caps
H12135€1,411.10stockPack of:
• One 3.2 mm Regular Wall ZrO2 MAS rotor (HZ09244)
• Three 3.2 mm SP1 drive caps (HZ07306)3.2 mm sample packer for Regular Wall rotor
HZ07607€110.503-6 weeksTool for sample compression into 3.2 mm Regular Wall MAS rotor3.2 mm sapphire DNP rotor + caps
H13861€3,111.30stockPack of:
• One 3.2 mm sapphire rotor (B6939)
• One 3.2 mm SP1 drive cap (HZ07306)
• Two 3.2 mm ZrO2 drive caps (HZ12372)3.2 mm sapphire rotor
B6939€1,338.80stockFor use with 3.2 mm caps for Regular Wall rotor:
• SP1 drive cap (HZ07306)
• ZrO2 drive cap (HZ12372)3.2 mm silicone soft plug kit
B7089€1,734.203-6 weeksKit contains:
• Ten silicone soft plugs with silica tubing
• One 3.2mm soft plug depth gauge
• One 3.2mm soft plug removal tool3.2 mm SP1 bottom cap for Thin Wall rotor
HZ16254€229.403-6 weeksFor use with 3.2 mm Thin Wall MAS rotors (HZ16252)
• T° Range: (-30 to +70°C)3.2 mm SP1 drive cap for Regular Wall rotor
HZ07306€152.30StockFor use with:
• 3.2 mm Regular Wall MAS rotors (HZ09244)
• 3.2 mm sapphire rotor (B6939)
• T° Range: (-30 to +70°C)3.2 mm SP1 drive cap for Thin Wall rotor
HZ16253€237.70StockFor use with 3.2 mm Thin Wall MAS rotors (HZ16252)3.2 mm Thick Bottom, Regular Wall ZrO2 MAS rotor
HZ09243€918.90stockIndividual 3.2 mm Thick Bottom, Regular Wall ZrO2 MAS rotor (no caps included)
For use with 3.2 mm caps for Regular Wall rotor:
• SP1 drive cap (HZ07306)
• Kel-F drive cap (HZ07308)3.2 mm Thick Bottom, Regular Wall ZrO2 MAS rotor + caps + PTFE spacer
HZ13706€1,296.60stockPack of:
• One 3.2mm Thick Bottom, Regular Wall ZrO2 MAS rotor (HZ09243)
• One 3.2mm SP1 drive cap (HZ07306)
• Two 3.2mm Kel-F drive cap (HZ07308)
• One PTFE spacer (HZ13618)3.2 mm Thin Wall ZrO2 MAS rotor + open one end, + caps
HZ16916€1,685.70stockPack of
• One 3.2 mm thin wall MAS rotor
• Three SP1 drive caps3.2 mm ZrO2 drive cap for Regular Wall rotor
HZ12372€1,169.90Delivery time to be confirmedFor use with:
• 3.2 mm Regular Wall rotor (HZ09244)
• 3.2 mm sapphire rotor (B6939)4 mm Kel-F drive cap
H6304€84.10StockFor use with:
• 4 mm MAS rotor (H6283)
• 4 mm HR-MAS rotors (HZ05537, HZ05528, HZ07213)4 mm Macor drive cap
K1935
discontinued, please refer to H6304, HZ12360 or HZ05951 for alternative capsdiscontinued, please refer to H6304, HZ12360 or HZ05951 for alternative caps4 mm sapphire MAS rotor
H8932€1,078.30stockIndividual 4 mm sapphire rotor (no caps included)
For use with 4 mm caps:
• SP1 drive cap (HZ12360)
• ZrO2 drive cap (HZ05951)4 mm Si3N4 MAS rotor
K1911€929.50stock• Individual 4 mm Si3N4 MAS rotor (no caps included)
• For use with 4 mm caps: ZrO2 drive cap (HZ05951)4 mm SP1 cap for High Speed rotor
HZ06427€253.60StockFor use with 4 mm High Speed MAS rotor only. Please refer to item HZ12360 for regular 4mm SP1 cap4 mm SP1 drive cap
HZ12360€164.40StockFor use with:
• 4 mm ZrO2 MAS rotor (H6283)
• 4 mm sapphire MAS rotor (H8932)
• 4 mm ZrO2 HR-MAS rotors (HZ05537, HZ05528, HZ07213)4 mm ZrO2 CRAMPS rotor with Kel-F spacer + caps
H7359€796.403-6 weeksPack of:
• One 4 mm ZrO2 CRAMPS rotor
• Two 4 mm Kel-F drive caps
• One M2x25 cylindric screw
• One 4 mm CRAMPS Kel-F spacer4 mm ZrO2 CRAMPS rotor with PE spacer + caps
H7358€771.403-6 weeksPack of:
• One 4 mm ZrO2 CRAMPS rotor
• Two 4 mm Kel-F drive caps
• One M2x25 cylindric screw
• One 4 mm CRAMPS PE spacer4 mm ZrO2 CRAMPS rotor with PTFE spacer + caps
H7360€747.603-6 weeksPack of:
• One 4 mm ZrO2 CRAMPS rotor
• Two 4 mm Kel-F drive caps
• One M2x25 cylindric screw
• One 4 mm CRAMPS PTFE spacer4 mm ZrO2 drive cap
HZ05951€943.00StockFor use with:
• 4 mm ZrO2 MAS rotor (H6283)
• 4 mm sapphire MAS rotor (H8932)
• 4 mm Si3N4 MAS rotors (K1911)4 mm ZrO2 HR-MAS rotor with 12 µL Kel-F spacer + caps
HZ05537€845.20StockPack of:
• One 4 mm ZrO2 HR MAS rotor (labeled)
• Three 4 mm Kel-F drive cap (H6304)
• One 4 mm 12 µL Kel-F spacer
• One Kel-F thread pin (HZ04800)
• One M2x25 cylindric screw4 mm ZrO2 HR-MAS rotor with 12 µL PTFE spacer + caps
HZ05538€867.80StockPack of:
• One 4 mm ZrO2 HR MAS rotor (labeled)
• Three 4 mm Kel-F drive cap (H6304)
• One 4 mm 12 µL PTFE spacer
• One Kel-F thread pin (HZ04800)
• One M2x25 cylindric screw4 mm ZrO2 HR-MAS rotor with 50 µL PTFE spacer + caps
HZ07213€845.20StockPack of:
• One 4 mm ZrO2 HR MAS rotor (labeled)
• Three 4 mm Kel-F drive cap (H6304)
• One 4 mm 50 µL PTFE spacer
• One Kel-F thread pin (HZ04800)
• One M2x25 cylindric screw4 mm ZrO2 MAS rotor
H6283€370.00stock4 mm ZrO2 MAS rotors (no caps included)
For use with 4 mm caps:
• Kel-F drive cap (H6304)
• SP1 drive cap (HZ12360)
• ZrO2 drive cap (HZ05951)4 mm ZrO2 MAS rotor + Kel-F & SP1 caps
K1910€781.40stockPack of:
• One 4 mm ZrO2 MAS rotor (H6283)
• Two 4 mm Kel-F drive caps (H6304)
• One 4 mm SP1 drive caps (HZ12360)4 mm ZrO2 MAS rotor + Kel-F caps
H14355€713.20stockPack of:
• One 4 mm ZrO2 MAS rotor (H6283)
• Three 4 mm Kel-F drive caps (H6304)4 mm ZrO2 MAS rotor + ZrO2 cap
H14356€1,507.60stockPack of:
• One 4 mm ZrO2 MAS rotor (H6283)
• One 4 mm ZrO2 drive cap (HZ05951)
• One 4 mm Kel-F drive cap (H6304)50 µL PTFE spacer
H11087€207.303-6 weeksFor use with 4 mm HR-MAS rotor only (HZ07213)
Pack of:
• One 50 µL HR-MAS PTFE insert
• One M2x2 Kel-F thread pin (HZ04800)
• One M2x25 cylindric screw7 mm ZrO2 CRAMPS rotor with Kel-F spacer + caps
K1921CR€723.303-6 weeksPack of:
• One 7 mm ZrO2 CRAMPS rotor
• Two 7 mm Kel-F drive caps without hole
• One cylindric screw M2x25
• One 7 mm CRAMPS Kel-F spacer7 mm ZrO2 MAS rotor + BN3 and Kel-F caps
K1921€819.50stockPack of:
• One 7 mm ZrO2 MAS rotor
• One 7 mm SP1 drive cap with hole
• One 7 mm Kel-F drive cap without hole
• One 7 mm Kel-F drive cap with hole7 mm ZrO2 MAS rotor + Kel-F caps
H14357€523.00stockPack of:
• One 7 mm ZrO2 rotor
• Three 7 mm Kel-F drive caps without hole7 mm ZrO2 MAS rotor + ZrO2 cap
H14358€1,670.00stockPack of:
• One 7 mm ZrO2 rotor
• One 7 mm ZrO2 drive cap96 slots storage rack for Kel-F inserts
B5771€541.803-6 weeks• Ideal for storing, freezing and tracking samples
• Sturdy anodized aluminum construction render this rack autoclavable and resistant to commonly used chemicalsCap set tool for 4mm MAS rotor
H148486€118.903-6 weeksTools for cap positioning on 4 mm MAS rotorsCap set tool for 7 mm MAS rotor
H148487€84.102-3 weeksTools for cap positioning on 7 mm MAS rotorsDISCONTINUED 3.2 mm Thin Wall ZrO2 MAS rotor, open on both ends + caps
H163649
stockPlease consult product number HZ16916 or H12135 as an alternativeDISCONTINUTED (replaced by HZ16913) - 3.2 mm cap remover for Regular Wall rotor
HZ07410
3-6 weeksHas been replaced by HZ16913Kel-F thread pin
HZ04800€23.303-6 weeksFor use with 4 mm HR-MAS rotor only (HZ05537, HZ05538, HZ07213) Material : PTFE , Sample Vol.: 12 µL, T° Range: (+10 to +50°C)Set of 10 Kel-F inserts for 4 mm MAS rotor
B4493€253.20StockFor use with 4 mm MAS rotor (H6283)
Each set contains:
• Ten Kel-F inserts
• Ten sealing screws
• Ten plugs
• One set of tools (Fork screwdriver, blunt-ended screwdriver, extraction screw)Set of 100 Kel-F inserts for 4 mm MAS rotor
B4495
Delivery delay to be confirmedFor use with 4 mm MAS rotor (H6283)
Each set contains:
• 100 Kel-F inserts
• 100 sealing screws
• 100 plugs
• One set of tools (Fork screwdriver, blunt-ended screwdriver, extraction screw)Set of 250 Kel-F inserts for 4 mm MAS rotor
B4496
Delivery delay to be confirmedFor use with 4 mm MAS rotor (H6283)
Each set contains:
• 250 Kel-F inserts
• 250 sealing screws
• 250 plugs
• One set of tools (Fork screwdriver, blunt-ended screwdriver, extraction screw)Tool for HR-MAS spacer
HZ04875€26.803-6 weeksFor use with 4mm HR-MAS rotor only (HZ05537, HZ05538, HZ07213)Tool Kit for 0.7 mm MAS rotor
H149435€16,557.402-3 weeksIncludes :
• Cap Removal Tool
• Filling Tool
• Sample Packer
• Cap Set Tool
• Tool InsertTool Kit for 3.2 mm Thin Wall rotor
B136904€831.20StockKit contains:
• 3.2 mm cap remover for Thin Wall rotor
• 3.2 mm filling funnel for Thin Wall rotor
• 3.2 mm cap set tool for Thin Wall rotor
• 3.2 mm packer for Thin Wall rotorTool Kit for 50 mL HR-MAS rotor
B2950€45.403-6 weeksFor use with 50 µL HR-MAS rotor only (HZ07213)
Kit contains:
• One extration tool
• One scredriver
• One depth gauge
Shop By
Shopping Options
Category
Manufacturer
diameter