Search results for: '10 mm nmr'
-
Tetrahydrofuran-d8
Ref. Packaging I.E.(%) Price Add to... D149BB 2 x 0.75 mL 99.5% D $66 D149CB 2 x 1 mL 99.5% D $79.1 D149FE 1 x 10 mL 99.5% D $317.5 -
Acetic acid-d4
Ref. Packaging I.E.(%) Price Add to... D012BB 2 x 0.75 mL 99.5% D $33.8 D012EA 1 x 10 mL 99.5% D $118.6 D041BB 2 x 0.75 mL 99.91% D $45.3 -
Chloroform-d with TMS
Ref. Packaging I.E.(%) Price Add to... D213H 1 x 100 mL 99.8% D $64 D307F 1 x 25 mL 99.8% D $26.4 D307H 1 x 100 mL 99.8% D $64 Show 3 more products -
Toluol-d8
Ref. Packaging I.E.(%) Price Add to... D005BB 2 x 0.75 mL 99.6% D $33.8 D005F 1 x 25 mL 99.6% D $255.4 D005FE 1 x 10 mL 99.6% D $112.8 Show 1 more products -
-
-
-
-
-
-
-
13C, 15N fMLF
CCN10073P10
3 - 6 weeks• 10 mg
• N-formyl-methionyl-leucyl-phenylalanine (fMLF)
• Labeling: 13C, 15N
• Crystallized -
Tool Kit for 0.7 mm MAS rotor
H149435$20,823.302-3 weeksIncludes :
• Cap Removal Tool
• Filling Tool
• Sample Packer
• Cap Set Tool
• Tool Insert -
-
5 mm Complete Coaxial System
516-CC-5$75.502-4 weeks• System includes Inner Insert and Flat Bottom Outer Tube
• Field Compatibility: Up to 600 MHz -
-
-
13C, 15N, D fMLF
CCND10073P10
3 - 6 weeks• 10 mg
• N-formyl-methionyl-leucyl-phenylalanine (fMLF)
• Labeling: 13C, 15N, D
• Crystallized -
-
Cap set tool for 4mm MAS rotor
H148486$150.703-6 weeksTools for cap positioning on 4 mm MAS rotors -
-
-
Set of 100 Kel-F inserts for 4 mm MAS rotor
B4495
Delivery delay to be confirmedFor use with 4 mm MAS rotor (H6283)
Each set contains:
• 100 Kel-F inserts
• 100 sealing screws
• 100 plugs
• One set of tools (Fork screwdriver, blunt-ended screwdriver, extraction screw) -
Set of 250 Kel-F inserts for 4 mm MAS rotor
B4496
Delivery delay to be confirmedFor use with 4 mm MAS rotor (H6283)
Each set contains:
• 250 Kel-F inserts
• 250 sealing screws
• 250 plugs
• One set of tools (Fork screwdriver, blunt-ended screwdriver, extraction screw) -
3.2 mm silicone soft plug kit
B7089$2,040.603-6 weeksKit contains:
• Ten silicone soft plugs with silica tubing
• One 3.2mm soft plug depth gauge
• One 3.2mm soft plug removal tool -
-
DISCONTINUTED (replaced by HZ16913) - 3.2 mm cap remover for Regular Wall rotor
HZ07410
3-6 weeksHas been replaced by HZ16913 -
-
Economy U-Shaped 5 mm Single Tube Washer
WG-1207-J5$151.502-4 weeks• With 24/40 Inner Joint
• For 7" Tubes -
-
-
-
-
W Band Suprasil EPR Tube both ends open, 40 mm, Pack of 10
WG-213ST9S$209.902-4 weeks• For photochemistry studies
• Suprasil®
• Cutoff wavelength: 190 nm -
W Band Suprasil EPR Tube one end sealed, 40 mm, Pack of 10
WG-213ST9S-RB$261.502-4 weeks• For photochemistry studies
• Suprasil®
• Cutoff wavelength: 190 nm -
Q Band Suprasil EPR Tube both ends open, 100 mm, Pack of 10
WG-222T$253.502-4 weeks• For photochemistry studies
• Suprasil®
• Cutoff wavelength: 190 nm -
Q Band Suprasil EPR Tube one end sealed, 100 mm, Pack of 10
WG-222T-RB$294.802-4 weeks• For photochemistry studies
• Suprasil®
• Cutoff wavelength: 190 nm -
Complete Gel Press System, 5.4 mm
NE-372-5.4/4.2
4 - 6 weeksIncludes:
• Piston Driver
• Cap
• Piston
• Gel Chamber
• Funnel -
Complete Gel Press System, 5 mm
NE-372-5/4.2
4 - 6 weeksIncludes:
• Piston Driver
• Cap
• Piston
• Gel Chamber
• Funnel -
Complete Gel Press System, 6 mm
NE-372-6/4.2
4 - 6 weeksIncludes:
• Piston Driver
• Cap
• Piston
• Gel Chamber
• Funnel -
-
-
-
-
4 mm Medium Wall Suprasil Economy EPR tube, 100 mm
727-SQ-100M$44.802-4 weeksSuprasil® Economy Tube -
4 mm Thin Wall Suprasil Economy EPR tube, 100 mm
707-SQ-100M$10.402-4 weeksSuprasil® Economy Tube -
4 mm Thin Wall Suprasil Economy EPR tube, 250 mm
707-SQ-250M$13.202-4 weeksSuprasil® Economy Tube -
2 mm Thin Wall Suprasil Economy EPR tube, 100 mm
724-SQ-100M$44.902-4 weeksSuprasil® Economy Tube -
4 mm Medium Wall Suprasil Economy EPR tube, 250 mm
727-SQ-250M$52.202-4 weeksSuprasil® Economy Tube -
5 mm Medium Wall Suprasil Economy EPR tube, 250 mm
730-SQ-250M$55.802-4 weeksSuprasil® Economy Tube -
-
Q Band CFQ EPR Tube one end sealed, 100 mm, Pack of 10
WG-221T-RB$207.102-4 weeks• For photochemistry studies
• Cleared Fused QuartzQ
• Cutoff wavelength: 190 nm -
3 mm SampleJet Caps without hole with code (Pack of 100)
Z107163$91.403-6 weeksCoded caps for SampleJet use -
-
-
-
-
-
Shaped Tubes kit
Z119964$1,984.903-6 weeksKit contains:
• Five Shaped tubes (Z106898)
• One shuttle for shaped tube (Z75327)
• Five caps for shaped tube (Z107144) -
-
-
-
13C15N Microcrystalline SH3
CCN10053P10
3 - 6 weeks• 5 mg
• SRC Homology 3 domain (SH3)
• Number of residues: 62
• Protein size: 5.6 kDa
• Labeling: 13C, 15N -
13C, 15N, D Microcrystalline SH3
CCND10053P20
3 - 6 weeks• 10 mg
• SRC Homology 3 domain (SH3)
• Number of residues: 62
• Protein size: 5.6 kDa
• Labeling: 13C, 15N, D -
13C, 15N, D Microcrystalline SH3
CCND10053P5
3 - 6 weeks• 10 mg
• SRC Homology 3 domain (SH3)
• Number of residues: 62
• Protein size: 5.6 kDa
• Labeling: 13C, 15N, D -
-
-
-
-
-
5 mm Precision Omni-Fit Suprasil EPR Tube, 8"
700-PV-7$466.502-4 weeks• Precision EPR tube
• Omni-Fit tube only
• 8" long
• -
-
Shigemi Slot Tubes kit
SBMS-K$1,830.002-4 weeksKit contains:
• Five Shigemi Slot Tubes (SBMS)
• One shuttle for Slot Tube (Z137538) -
150 mL Suprasil Large Volume Dewar Flask
WG-850-B-Q$1,428.202-4 weeksFor Bruker and Jeol instruments -
150 mL Suprasil Offset Nitrogen Dewar Flask
WG-853-B-Q$1,454.602-4 weeksFor Bruker and Jeol instruments -
-
-
-
-
-
-
-
-
-
4 mm Thin Wall Suprasil Precision Quick Pressure EPR Tube, 8"
734-QPV-7$407.102-4 weeks• Precision EPR tube
• Quick Pressure Valve
• Thin Wall
• 8" long -
50 µL PTFE spacer
H11087$243.403-6 weeksFor use with 4 mm HR-MAS rotor only (HZ07213)
Pack of:
• One 50 µL HR-MAS PTFE insert
• One M2x2 Kel-F thread pin (HZ04800)
• One M2x25 cylindric screw -
8 mm PTFE/Silicone Septa, Pack of 12
NE-3208
3 - 4 weeks• For 5 mm Screw Thread Tubes
• Cap not included -
-
-
-
Multi Tube Jet Washer/Dryer Complete for 3-5 mm Tubes, silicon joint
WG-1209-1$446.402-4 weeks#9 Silicon Joint -
-
-
-
-
8 mm Solid Top Thread Cap, Pack of 12
NE-3108T
3 - 4 weeks• For 5 mm Screw Thread Tubes
• Septa included -
12 µL PTFE spacer
H8549$213.503-6 weeksFor use with 4 mm HR-MAS rotor only (HZ05537, HZ05538)
Pack of:
• One 12 µL HR-MAS PTFE insert
• One M2x2 Kel-F MAS thread pin (HZ04800)
• One M2x25 cylindric screw -
-
8 mm Open Top Thread Cap, Pack of 12
NE-3008
3 - 4 weeks• For 5 mm Screw Thread Tubes
• Septa not included -
-
12 µL Kel-F spacer
H8548$214.903-6 weeksFor use with 4 mm HR-MAS rotor only (HZ05537, HZ05538)
Pack of:
• One 12 µL HR-MAS Kel-F insert
• One M2x2 Kel-F MAS thread pin (HZ04800)
• One M2x25 cylindric screw -
-
-
-
-
-
-
-
-
8 mm Solid Top Thread Cap With Rubber Liner, Pack of 12
NE-3108
3 - 4 weeks• For 5 mm Screw Thread Tubes
• Septa included -
-
-
-
-
-
-
-
Multi Tube Jet Washer/Dryer Complete for 3-5 mm Tubes, ISO 29/32 Taper Joint
WG-1209-J2$446.402-4 weeksISO 29/32 Taper Joint -
-
-
-
-
-
-
-
-
-
-
Combination pH electrode with BNC connector (also known as #5 connector)
6030-02-BNC$1,159.702-4 weeksFor use in 5mm thin walled NMR tubes up to 8 inches in length -
-
-
-
-
-
-
13C, 15N SH3 in 1.3mm Bruker rotor
CCN100521P
3 - 6 weeks• SRC Homology 3 domain (SH3)
• Number of residues: 62
• Protein size: 5.6 kDa
• Labeling: 13C, 15N -
5 mm Thin Wall Suprasil Precision Low Pressure EPR Tube, 8"
722-LPV-7$291.902-4 weeks• Suprasil Precision Tube
• Thin Wall
• 8" long -
4 mm Thin Wall Suprasil Precision Low Pressure EPR Tube, 8"
734-LPV-7$256.102-4 weeks• Suprasil Precision Tube
• Thin Wall
• 8" long -
13C, 15N, D SH3 in 1.3mm Bruker rotor
CCND100521P
3 - 6 weeks• SRC Homology 3 domain (SH3)
• Number of residues: 62
• Protein size: 5.6 kDa
• Labeling: 13C, 15N, D -
-
-
-
-
-
-
-
-
-
-
-
-
13C, 15N SH3 in 3.2mm Bruker rotor
CCN100523P
3 - 6 weeks• SRC Homology 3 domain (SH3)
• Number of residues: 62
• Protein size: 5.6 kDa
• Labeling: 13C, 15N -
13C, 15N, D SH3 in 3.2mm Bruker rotor
CCND100523P
3 - 6 weeks• SRC Homology 3 domain (SH3)
• Number of residues: 62
• Protein size: 5.6 kDa
• Labeling: 13C, 15N, D -
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
PTFE caps for 3 mm Tube, Pack of 25
WG-1264-3$75.102-4 weeks• For Precision Tube Only
• Material: PTFE -
PTFE caps for 4 mm Tube, Pack of 25
WG-1264-4$84.302-4 weeks• For Precision Tube Only
• Material: PTFE -
PTFE caps for 5 mm Tube, Pack of 25
WG-1264-5$67.202-4 weeks• For Precision Tube Only
• Material: PTFE -
-