Search results for: '5 mm NMR Tubes'
- Did you mean
- 5 mm nmr tube
-
3 mm Shigemi microtube set matched with Methanol-d4
MMS-003$190.002-4 weeksCompatible with all manufacturers probes -
5 mm SampleJet Caps without hole with code (Pack of 100)
Z106779$91.40StockCoded caps for use with SampleJet system -
10 mm Shigemi microtube set matched with D2O
BMS-010BJ$510.002-4 weeksCompatible with Bruker and Jeol probes -
2.5 mm Shigemi microtube set matched with Methanol-d4
MMS-0025$205.002-4 weeksCompatible with Bruker probes only -
-
2.5 mm Regular Wall ZrO2 MAS rotor + caps
H8416$1,736.101-3 weeksPack of:
• One 2.5 mm Regular Wall ZrO2 MAS rotor (HZ05165)
• Two 2.5 mm SP1 bottom caps for Regular Wall rotor (HZ05267)
• Two 2.5 mm SP1 drive caps for Regular Wall rotors (HZ05269) -
10 mm Shigemi microtube set matched with Chloroform-d
CMS-010BJ$510.002-4 weeksCompatible with Bruker and Jeol probes -
10 mm Shigemi microtube set matched with DMSO-d6
DMS-010BJ$525.002-4 weeksCompatible with Bruker and Jeol probes -
-
4 mm Shigemi microtube set matched with D2O
BMS-004B$175.00StockCompatible with Bruker probes only -
-
4 mm Shigemi microtube set matched with D2O
BMS-004V$175.00StockCompatible with Varian probes only -
-
4 mm Shigemi microtube set matched with Chloroform-d
CMS-004B$175.002-4 weeksCompatible with Bruker probes only -
4 mm Shigemi microtube set matched with Chloroform-d
CMS-004J$175.002-4 weeksCompatible with Jeol probes only -
4 mm Shigemi microtube set matched with Chloroform-d
CMS-004V$175.002-4 weeksCompatible with Varian probes only -
4 mm Shigemi microtube set matched with DMSO-d6
DMS-004B$190.002-4 weeksCompatible with Bruker probes only -
4 mm Shigemi microtube set matched with DMSO-d6
DMS-004J$190.002-4 weeksCompatible with Jeol probes only -
4 mm Shigemi microtube set matched with DMSO-d6
DMS-004V$190.002-4 weeksCompatible with Varian probes only -
-
2.5 mm Regular Wall ZrO2 MAS rotor
HZ05165$1,137.101-3 weeksFor use with 2.5 mm caps for Regular Wall MAS rotors:
• HZ05269 (SP1 drive cap)
• HZ05276 (SP1 bottom cap) -
Adenosine-5'-Triphosphate, Atp-2,8-D2,1',2',3',4',5',5'-D6
CD6300P
2 - 4 weeks• Sodium Salt Solution, 5 mM Tris Buffer
• 98% D -
Cytidine-5'-Triphosphate, Ctp-5,6-D2,1',2',3',4',5',5'-D6
CD6305P
2 - 4 weeks• Sodium Salt Solution, 5 mM Tris Buffer
• 98% D -
8 mm Shigemi microtube set matched with D2O
BMS-008BJ$440.002-4 weeksCompatible with Bruker and Jeol probes -
8 mm Shigemi microtube set matched with D2O
BMS-008V$440.002-4 weeksCompatible with Varian probes only -
10 mm Shigemi microtube set matched with D2O
BMS-010V$565.002-4 weeksCompatible with Varian probes only -
-
8 mm Shigemi microtube set matched with Chloroform-d
CMS-008BJ$440.002-4 weeksCompatible with Bruker and Jeol probes -
8 mm Shigemi microtube set matched with Chloroform-d
CMS-008V$440.002-4 weeksCompatible with Varian probes only -
10 mm Shigemi microtube set matched with Chloroform-d
CMS-010V$565.002-4 weeksCompatible with Varian probes only -
8 mm Shigemi microtube set matched with DMSO-d6
DMS-008BJ$460.002-4 weeksCompatible with Bruker and Jeol probes -
8 mm Shigemi microtube set matched with DMSO-d6
DMS-008V$460.002-4 weeksCompatible with Varian probes only -
10 mm Shigemi microtube set matched with DMSO-d6
DMS-010V$565.002-4 weeksCompatible with Varian probes only -
8 mm Shigemi Advanced microtube set matched with Methanol-d4
MMS-008TB$485.002-4 weeksCompatible with Bruker probes only -
8 mm Shigemi Advanced microtube set matched with Methanol-d4
MMS-008TV$485.002-4 weeksCompatible with Varian probes only -
Guanosine-5'-Triphosphate, Gtp-8-D, 1',2',3',4',5',5'-D6
CD6310P
2 - 4 weeks• Sodium Salt Solution, 5 mM Tris Buffer
• 98% D -
2.5 mm Thin Wall ZrO2 MAS rotor + caps
HZ15196$1,807.701-3 weeksPack of:
• One 2.5 mm Thin Wall ZrO2 MAS rotor
• Two 2.5 mm SP1 bottom caps for Thin Wall rotor (HZ06694)
• Two 2.5mm SP1 drive caps for Thin Wall rotor (HZ06693) -
1.9 mm ZrO2 MAS rotor (Tight Fit) + caps
H123832-01$2,837.901-3 weeksFor Low Temperature NMR Experiments
Pack of:
• One 1.9 mm ZrO2 MAS rotor
• Two tight fit 1.9 mm SP1 bottom caps (HZ16789)
• Two tight fit 1.9 mm SP1 drive caps (H122284) -
-
-
-
Uridine- 5'-Triphosphate Utp-5,6-D2,1',2',3',4',5',5'-D6 Sodium Salt Solution
CD6315P
2 - 4 weeks• Sodium Salt Solution, 5 mM Tris Buffer
• 98% D -
2.5 mm Shigemi microtube set matched with D2O
BMS-0025$205.002-4 weeksCompatible with Bruker probes only -
3 mm Shigemi microtube set matched with D2O
BMS-003$175.00StockCompatible with all manufacturers probes -
3 mm Shigemi microtube set matched with Chloroform-d
CMS-003$175.002-4 weeksCompatible with all manufacturers probes -
3 mm Shigemi microtube set matched with DMSO-d6
DMS-003$190.002-4 weeksCompatible with all manufacturers probes -
-
2.5 mm Shigemi microtube set matched with Chloroform-d
CMS-0025$205.002-4 weeksCompatible with Bruker probes only -
2.5 mm Shigemi microtube set matched with DMSO-d6
DMS-0025$205.002-4 weeksCompatible with Bruker probes only -
-
-
4 mm Si3N4 MAS rotor
K1911$1,150.601-3 weeks• Individual 4 mm Si3N4 MAS rotor (no caps included)
• For use with 4 mm caps: ZrO2 drive cap (HZ05951) -
-
-
-
-
-
-
-
-
-
-
-
2.5 mm SP1 drive cap for Regular Wall rotor
HZ05269$288.90StockFor use with regular wall 2.5 mm MAS rotors (HZ05165)
Length: 2 mm -
2.5 mm SP1 bottom cap for Regular Wall rotor
HZ05276$191.40StockFor use with regular wall 2.5 mm MAS rotors (HZ05165)
Length: 2 mm -
4 mm sapphire MAS rotor
H8932$1,335.101-3 weeksIndividual 4 mm sapphire rotor (no caps included)
For use with 4 mm caps:
• SP1 drive cap (HZ12360)
• ZrO2 drive cap (HZ05951) -
-
1.9 mm ZrO2 MAS rotor + caps
H123832$3,122.401-3 weeksPack of:
• One 1.9 mm ZrO2 MAS rotor
• Two 1.9 mm SP1 bottom caps (HZ16789)
• Two 1.9 mm SP1 drive caps (H122284) -
-
-
4 mm ZrO2 MAS rotor + ZrO2 cap
H14356$1,643.401-3 weeksPack of:
• One 4 mm ZrO2 MAS rotor (H6283)
• One 4 mm ZrO2 drive cap (HZ05951)
• One 4 mm Kel-F drive cap (H6304) -
8 mm Shigemi Advanced microtube set matched with D2O
BMS-008TB$460.002-4 weeksCompatible with Bruker probes only -
8 mm Shigemi Advanced microtube set matched with D2O
BMS-008TV$460.002-4 weeksCompatible with Varian probes only -
2.5 mm filling tool for Regular Wall rotor
HZ05526$38.803-6 weeksTool for sample loading into 2.5 mm Regular Wall MAS rotor -
2.5 mm sample packer for Regular Wall rotor
HZ05528$62.103-6 weeksTool for sample compression into 2.5 mm Regular Wall MAS rotor -
2.5 mm sample packer for Thin Wall rotor
HZ15198$147.703-6 weeksTool for sample compression into 2.5 mm Thin Wall MAS rotor -
2.5 mm filling tool for Thin Wall rotor
HZ15199$41.903-6 weeksTool for sample loading into 2.5 mm Thin Wall MAS rotor -
-
-
8 mm Shigemi Advanced microtube set matched with Chloroform-d
CMS-008TB$460.002-4 weeksCompatible with Bruker probes only -
8 mm Shigemi Advanced microtube set matched with Choroform-d
CMS-008TV$460.002-4 weeksCompatible with Varian probes only -
8 mm Shigemi Advanced microtube set matched with DMSO-d6
DMS-008TB$485.002-4 weeksCompatible with Bruker probes only -
8 mm Shigemi Advanced microtube set matched with DMSO-d6
DMS-008TV$485.002-4 weeksCompatible with Varian probes only -
4 mm ZrO2 MAS rotor
H6283$592.801-3 weeksIndividual 4 mm ZrO2 MAS rotor (no caps included)
For use with 4 mm caps:
• Kel-F drive cap (H6304)
• SP1 drive cap (HZ12360)
• ZrO2 drive cap (HZ05951) -
-
-
-
4 mm ZrO2 MAS rotor + Kel-F caps
H14355$903.901-3 weeksPack of:
• One 4 mm ZrO2 MAS rotor (H6283)
• Three 4 mm Kel-F drive caps (H6304) -
-
Adenosine-5'-Triphosphate Atp-13C10
CC6300P
2 - 4 weeks• Sodium Salt Solution, 5 mM Tris Buffer
• 98% 13C -
Cytidine-5'-Triphosphate-Ctp-13C9
CC6305P
2 - 4 weeks• Sodium Salt Solution, 5 mM Tris Buffer
• 98% 13C -
Guanosine-5'-Triphosphate, Gtp-13C10
CC6310P
2 - 4 weeks• Sodium Salt Solution, 5 mM Tris Buffer
• 98% 13C -
Uridine-5'-Triphosphate, Utp-13C9
CC6315P
2 - 4 weeks• Sodium Salt Solution, 5 mM Tris Buffer
• 98% 13C -
2.5 mm cap remover for Thin Wall rotor
H13836$1,479.103-6 weeksTool for cap removal from 2.5 mm Thin Wall MAS rotor -
2.5 mm cap remover for Regular Wall rotor
HZ05503$637.103-6 weeksTool for cap removal from 2.5 mm Regular Wall MAS rotor -
4 mm ZrO2 MAS rotor + Kel-F & SP1 caps
K1910$986.101-3 weeksPack of:
• One 4 mm ZrO2 MAS rotor (H6283)
• Two 4 mm Kel-F drive caps (H6304)
• One 4 mm SP1 drive caps (HZ12360) -
13C, 15N Ubiquitin in 1.3 mm Bruker rotor
CCND100621P
3 - 6 weeks• Full length Ubiquitin (Residue 1-76)
• Protein size: 6.8 kDa
• Labeling: 13C, 15N -
4 mm ZrO2 CRAMPS rotor with PE spacer + caps
H7358$918.903-6 weeksPack of:
• One 4 mm ZrO2 CRAMPS rotor
• Two 4 mm Kel-F drive caps
• One M2x25 cylindric screw
• One 4 mm CRAMPS PE spacer -
4 mm ZrO2 CRAMPS rotor with PTFE spacer + caps
H7360$885.103-6 weeksPack of:
• One 4 mm ZrO2 CRAMPS rotor
• Two 4 mm Kel-F drive caps
• One M2x25 cylindric screw
• One 4 mm CRAMPS PTFE spacer -
-
-
-
-
2.5 mm SP1 drive cap for Thin Wall rotor
HZ06693$493.101-3 weeksFor use with 2.5 mm Thin Wall MAS rotors (HZ15196) -
2.5 mm SP1 bottom cap for Thin Wall rotor
HZ06694$328.801-3 weeksFor use with 2.5 mm Thin Wall MAS rotors (HZ15196) -
3.2 mm Regular Wall ZrO2 MAS rotor + caps
H12135$1,673.901-3 weeksPack of:
• One 3.2 mm Regular Wall ZrO2 MAS rotor (HZ09244)
• Three 3.2 mm SP1 drive caps (HZ07306) -
13C, 15N GB1 in 1.3 mm Bruker rotor
CCN100321P
3 - 6 weeks• B-1 Immunoglobulin G Binding Domain (GB1)
• Residues 303-357 of the protein G, with T303Q mutation
• Size: 6.2 kDa
• Labeling: 13C, 15N -
7 mm ZrO2 MAS rotor + ZrO2 cap
H14358$1,421.301-3 weeksPack of:
• One 7 mm ZrO2 rotor
• One 7 mm ZrO2 drive cap -
13C, 15N, D Ubiquitin in 1.3 mm Bruker rotor
CCN100621P
3 - 6 weeks• Full length Ubiquitin (Residue 1-76)
• Protein size: 6.8 kDa
• Labeling: 13C, 15N, D -
4 mm ZrO2 CRAMPS rotor with Kel-F spacer + caps
H7359$951.003-6 weeksPack of:
• One 4 mm ZrO2 CRAMPS rotor
• Two 4 mm Kel-F drive caps
• One M2x25 cylindric screw
• One 4 mm CRAMPS Kel-F spacer -
15 mm PTFE/Silicone Septa, Pack of 12
NE-3215
3 - 4 weeks• For 10 mm Screw Thread Tubes
• Cap not included -
-
13C, 15N, D GB1 in 1.3 mm Bruker rotor
CCND100321P
3 - 6 weeks• B-1 Immunoglobulin G Binding Domain (GB1)
• Residues 303-357 of the protein G, with T303Q mutation
• Size: 6.2 kDa
• Labeling: 13C, 15N -
15 mm Open Top Thread Cap, Pack of 12
NE-3015
3 - 4 weeks• For 10 mm Screw Thread Tubes
• Septa not included -
4 mm ZrO2 MAS rotor, set of 10
H6283-10$5,064.101-3 weeksSet of ten 4 mm ZrO2 MAS rotors (no caps included)
For use with 4 mm caps:
• Kel-F drive cap (H6304)
• SP1 drive cap (HZ12360)
• ZrO2 drive cap (HZ05951) -
1 mm NMR capillaries 75 mm with PTFE Protective Sleeve, Pack of 10
NE-262-1-PS$92.403 - 4 weeksFor use with Microtubes -
3.2 mm Regular Wall ZrO2 MAS rotor
HZ09244$1,376.601-3 weeksIndividual 3.2 mm Regular Wall ZrO2 MAS rotor (no caps included)
For use with 3.2 mm caps for Regular Wall rotor:
• SP1 drive cap (HZ07306)
• Kel-F drive cap (HZ07308) -
TE102 Standard Aqueous Cell Spectroscopic Quality
WG-812-Q$819.102-4 weeksFor All TE102 except JEOL -
1.3 mm ZrO2 MAS rotor + caps
HZ14752$3,286.801-3 weeksPack of :
• One 1.3 mm ZrO2 MAS rotor
• Two 1.3 mm SP1 bottom cap (HZ08194)
• Two 1.3 mm SP1 drive caps (HZ14381) -
-
7 mm ZrO2 MAS rotor + Kel-F caps
H14357$609.401-3 weeksPack of:
• One 7 mm ZrO2 rotor
• Three 7 mm Kel-F drive caps without hole -
2.5 mm cap set tool for Regular and Thin Wall rotors
HZ16624$86.903-6 weeksTools for cap positioning on 2.5 mm Regular Wall and Thin Wall MAS rotors -
7 mm ZrO2 MAS rotor + BN3 and Kel-F caps
K1921$989.101-3 weeksPack of:
• One 7 mm ZrO2 MAS rotor
• One 7 mm SP1 drive cap with hole
• One 7 mm Kel-F drive cap without hole
• One 7 mm Kel-F drive cap with hole -
15 mm Solid Top Thread Cap With Rubber Liner, Pack of 12
NE-3115
3 - 4 weeks• For 10 mm Screw Thread Tubes
• Septa included -
7 mm ZrO2 CRAMPS rotor with Kel-F spacer + caps
K1921CR$903.703-6 weeksPack of:
• One 7 mm ZrO2 CRAMPS rotor
• Two 7 mm Kel-F drive caps without hole
• One cylindric screw M2x25
• One 7 mm CRAMPS Kel-F spacer -
-
3.2 mm Thick Bottom, Regular Wall ZrO2 MAS rotor
HZ09243$999.801-3 weeksIndividual 3.2 mm Thick Bottom, Regular Wall ZrO2 MAS rotor (no caps included)
For use with 3.2 mm caps for Regular Wall rotor:
• SP1 drive cap (HZ07306)
• Kel-F drive cap (HZ07308) -
2.5 mm SP1 drive cap for Regular Wall rotor (long stem)
HZ12600$153.502-3 weeksFor use with regular wall 2.5 mm MAS rotors (HZ05165)
Sample Volume: about 8 µL -
-
-
-
-
-
-
4 mm ZrO2 HR-MAS rotor with 12 µL PTFE spacer + caps
HZ05538$1,077.90StockPack of:
• One 4 mm ZrO2 HR MAS rotor (labeled)
• Three 4 mm Kel-F drive cap (H6304)
• One 4 mm 12 µL PTFE spacer
• One Kel-F thread pin (HZ04800)
• One M2x25 cylindric screw -
4 mm ZrO2 HR-MAS rotor with 50 µL PTFE spacer + caps
HZ07213$1,049.70StockPack of:
• One 4 mm ZrO2 HR MAS rotor (labeled)
• Three 4 mm Kel-F drive cap (H6304)
• One 4 mm 50 µL PTFE spacer
• One Kel-F thread pin (HZ04800)
• One M2x25 cylindric screw -
-
-
-
-
-
Cell Free Amino Acid Mixture-15N (20 Amino Acids). 5-100 mM in water
CN071P1$180.00Stock• Mixture of 20 Amino Acids, 15N
• 5-100 mM in water -
4 mm ZrO2 drive cap
HZ05951$1,116.90StockFor use with:
• 4 mm ZrO2 MAS rotor (H6283)
• 4 mm sapphire MAS rotor (H8932)
• 4 mm Si3N4 MAS rotors (K1911) -
-
Valve Body for Thin Wall Tube
NE-CAV5-G$100.804 - 6 weeksFor Use with Pressure Valve (PCAV) and Controlled Atmosphere (CAV) Tubes -
4 mm ZrO2 HR-MAS rotor with 12 µL Kel-F spacer + caps
HZ05537$1,049.70StockPack of:
• One 4 mm ZrO2 HR MAS rotor (labeled)
• Three 4 mm Kel-F drive cap (H6304)
• One 4 mm 12 µL Kel-F spacer
• One Kel-F thread pin (HZ04800)
• One M2x25 cylindric screw -
-
Valve Body for Heavy Wall Tube
NE-CAV5-H-G$113.704 - 6 weeksFor Use with Pressure Valve (PCAV) and Controlled Atmosphere (CAV) Tubes -
Valve Body for Medium Wall Tube
NE-CAV5-M-G$103.404 - 6 weeksFor Use with Pressure Valve (PCAV) and Controlled Atmosphere (CAV) Tubes -
-
-
-
-
-
4 mm SP1 drive cap
HZ12360$205.501-3 weeksFor use with:
• 4 mm ZrO2 MAS rotor (H6283)
• 4 mm sapphire MAS rotor (H8932)
• 4 mm ZrO2 HR-MAS rotors (HZ05537, HZ05528, HZ07213) -
-
-
Complete Gel Press System, 5.4 mm
NE-372-5.4/4.2
4 - 6 weeksIncludes:
• Piston Driver
• Cap
• Piston
• Gel Chamber
• Funnel -
0.7 mm MAS rotor kit
H153268$4,517.801-3 weeks0.7mm ZrO2 rotor tested with Vespel caps
Each kit includes:
• One 0.7 mm MAS rotor
• Four 0.7 mm SP1 drive caps
• Four 0.7 mm SP1 bottom caps -
-
3.2 mm Thin Wall ZrO2 MAS rotor + open one end, + caps
HZ16916$1,937.401-3 weeksPack of
• One 3.2 mm thin wall MAS rotor
• Three SP1 drive caps
-
-
4 mm Kel-F drive cap
H6304$106.601-3 weeksFor use with:
• 4 mm MAS rotor (H6283)
• 4 mm HR-MAS rotors (HZ05537, HZ05528, HZ07213) -
-
-
-
-
-
-
-
-
Tool Kit for 3.2 mm Thin Wall rotor
B136904$981.50StockKit contains:
• 3.2 mm cap remover for Thin Wall rotor
• 3.2 mm filling funnel for Thin Wall rotor
• 3.2 mm cap set tool for Thin Wall rotor
• 3.2 mm packer for Thin Wall rotor -
Cap set tool for 7 mm MAS rotor
H148487$106.602-3 weeksTools for cap positioning on 7 mm MAS rotors -
3.2 mm sapphire DNP rotor + caps
H13861$3,727.201-3 weeksPack of:
• One 3.2 mm sapphire rotor (B6939)
• One 3.2 mm SP1 drive cap (HZ07306)
• Two 3.2 mm ZrO2 drive caps (HZ12372) -
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
3.2 mm ZrO2 drive cap for Regular Wall rotor
HZ12372$1,373.80Delivery time to be confirmedFor use with:
• 3.2 mm Regular Wall rotor (HZ09244)
• 3.2 mm sapphire rotor (B6939) -
3.2 mm sample packer for Regular Wall rotor
HZ07607$140.103-6 weeksTool for sample compression into 3.2 mm Regular Wall MAS rotor -
3.2 mm filling tool for Regular Wall rotor
HZ07608$40.303-6 weeksTool for sample loading into 3.2 mm Regular Wall MAS rotor