Search results for: '5 mm'

Pack of:
• One 7 mm ZrO₂ CRAMPS rotor
• Two 7 mm Kel-F drive caps without hole
• One cylindric screw M2x25
• One 7 mm CRAMPS Kel-F spacer

Pack of 10

Pack of 10

2 mM Lysozyme in H₂O/D₂O 90/10

• 100 mm long
• Pyrex®
• Both Ends Open

• 100 mm long
• Pyrex®
• Both Ends Open

• Precision NMR tube
• Thin Wall
• Quartz
• 8" long
• 5 tubes with caps
• MHz Rating: 400 Mz

• 100 mm long
• Pyrex®
• Both Ends Open

• For 5 mm Screw Thread Tubes
• Septa included

Individual 3.2 mm Thick Bottom, Regular Wall ZrO₂ MAS rotor (no caps included)
For use with 3.2 mm caps for Regular Wall rotor:
• SP1 drive cap (HZ07306)
• Kel-F drive cap (HZ07308)

• 75 mm long
• Pyrex®
• Sealed at one end

• 100 mm long
• Pyrex®
• Sealed at one end

• 203 mm long
• Pyrex®
• Sealed at one end

• 203 mm long
• Pyrex®
• Sealed at one end

• 100 mm long
• Pyrex®
• Sealed at one end

For 5 mm O.D., 7" Long NMR tubes

• For 5 mm Screw Thread Tubes
• Cap not included

Pack of:
• One 4 mm ZrO₂ HR MAS rotor (labeled)
• Three 4 mm Kel-F drive cap (H6304)
• One 4 mm 12 µL PTFE spacer
• One Kel-F thread pin (HZ04800)
• One M2x25 cylindric screw

Pack of:
• One 4 mm ZrO₂ HR MAS rotor (labeled)
• Three 4 mm Kel-F drive cap (H6304)
• One 4 mm 50 µL PTFE spacer
• One Kel-F thread pin (HZ04800)
• One M2x25 cylindric screw

• Suprasil Precision Tube
• Medium Wall
• 250 mm long

• For 5 mm Screw Thread Tubes
• Septa not included

Pack of:
• One 4 mm ZrO₂ HR MAS rotor (labeled)
• Three 4 mm Kel-F drive cap (H6304)
• One 4 mm 12 µL Kel-F spacer
• One Kel-F thread pin (HZ04800)
• One M2x25 cylindric screw

For use with regular wall 2.5 mm MAS rotors (HZ05165)
Length: 2 mm

For use with regular wall 2.5 mm MAS rotors (HZ05165)
Length: 2 mm

• For 5 mm Screw Thread Tubes
• Septa included

For casting 5.4 mm gels

0.3% Chloroform (CHCl₃) in Acetone-d₆, 40 mm height filling

• 203 mm long
• Pyrex®
• Sealed at one end

For use with Microtubes

For use with Microtubes

Kit Contains:
• One Microtube NE-H5/3
• One Adapter NE-325-5/2
• One Extration Rod NE-341-5
• Five 1.7 mm O.D. Capillaries NE-262-2

Kit Contains:
• One Microtube NE-H5/2.5
• One Adapter NE-325-5/1.7
• One Extration Rod NE-341-5
• Five 1.7 mm O.D. Capillaries NE-262-1.7

For 5 mm O.D., 8"-9" Long NMR tubes

Kit Contains:
• One Sample Tube NE-UP5-7
• One Adapter NE-325-5/2.5
• One Extration Rod NE-341-5
• Five 2.5 mm O.D. Capillaries NE-262-2.5

Kit Contains:
• One Microtube NE-H5/3-Br
• One Adapter NE-325-5/2
• One Extration Rod NE-341-5
• Five 2 mm O.D. Capillaries NE-262-2

For use with:
• 4 mm ZrO₂ MAS rotor (H6283)
• 4 mm sapphire MAS rotor (H8932)
• 4 mm Si₃N₄ MAS rotors (K1911)

• Box of 550 tubes
• Caps not included

Kit Contains:
• One Microtube NE-H5/2.5-V-Br
• One Adapter NE-325-5/1.7
• One Extration Rod NE-341-5
• Five 1.7 mm O.D. Capillaries NE-262-1.7

Pack of
• One 3.2 mm thin wall MAS rotor
• Three SP1 drive caps

For use with:
• 4 mm ZrO₂ MAS rotor (H6283)
• 4 mm sapphire MAS rotor (H8932)
• 4 mm ZrO₂ HR-MAS rotors (HZ05537, HZ05528, HZ07213)

Tool for sample compression into 4 mm MAS rotor

Tool for sample compression into 7 mm MAS rotor

Tool for cap removal from 4 mm MAS rotor

Tool for cap removal from 7 mm MAS rotor

Tool for sample loading into 7 mm MAS rotor

Tool for sample loading into 4 mm MAS rotor

Tool for cap removal from 1.3 mm MAS rotor

Tool for sample loading into 1.3 mm MAS rotor

Tool for sample compression into 1.3 mm MAS rotor

Tool for sample loading into 1.9 mm MAS rotor

Tool for sample compression into 1.9 mm MAS rotor

Tool for cap removal from 1.9 mm MAS rotor

For use with 1.9 mm MAS rotor

For use with 1.3 mm MAS rotor

For use with 1.3 mm MAS rotor

For use with 1.9 mm MAS rotor

For use with 0.7 mm MAS rotor

For use with 0.7 mm MAS rotor

Quartz Precision Tube

Quartz Precision Tube

Quartz Precision Tube

Suprasil® Precision Tube

Suprasil® Precision Tube

Suprasil® Precision Tube

Tool for cap removal from 2.5 mm Thin Wall MAS rotor

Tool for cap removal from 2.5 mm Regular Wall MAS rotor

Tool for sample loading into 2.5 mm Regular Wall MAS rotor

Tool for sample compression into 2.5 mm Regular Wall MAS rotor

Tool for sample compression into 2.5 mm Thin Wall MAS rotor

Tool for sample loading into 2.5 mm Thin Wall MAS rotor

Pack of:
• One 3.2 mm sapphire rotor (B6939)
• One 3.2 mm SP1 drive cap (HZ07306)
• Two 3.2 mm ZrO₂ drive caps (HZ12372)

0.7mm ZrO₂ rotor tested with Vespel caps

Each kit includes:
• One 0.7 mm MAS rotor
• Four 0.7 mm SP1 drive caps
• Four 0.7 mm SP1 bottom caps

For use with 2.5 mm Thin Wall MAS rotors (HZ15196)

For use with 2.5 mm Thin Wall MAS rotors (HZ15196)

For use with:
• 4 mm MAS rotor (H6283)
• 4 mm HR-MAS rotors (HZ05537, HZ05528, HZ07213)

Shuttle to hold 3.0 mm tubes for use with SampleJet system

Shuttle to hold 1.7 mm tubes for use with SampleJet system

Shuttle to hold 1.0 mm tubes for use with SampleJet system

• Box of 550 tubes
• Caps included

Pack of 10

Pack of 10

Pack of 10

Pack of 10

Pack of 10

Pack of 10

Tools for cap positioning on 1.3 mm MAS rotor

Tools for cap positioning on 1.9 mm MAS rotor

For use with 7 mm CRAMPS rotor only

• 100 mm long
• Pyrex®
• Sealed at one end
• For Agilent Cold Probe

For use with Microtubes

For use with 4 mm MAS rotor (H6283)

Each set contains:
• 100 Kel-F inserts
• 100 sealing screws
• 100 plugs
• One set of tools (Fork screwdriver, blunt-ended screwdriver, extraction screw)

For use with 4 mm MAS rotor (H6283)

Each set contains:
• 250 Kel-F inserts
• 250 sealing screws
• 250 plugs
• One set of tools (Fork screwdriver, blunt-ended screwdriver, extraction screw)

Kit contains:
• 3.2 mm cap remover for Thin Wall rotor
• 3.2 mm filling funnel for Thin Wall rotor
• 3.2 mm cap set tool for Thin Wall rotor
• 3.2 mm packer for Thin Wall rotor

For use with:
• 3.2 mm Regular Wall rotor (HZ09244)
• 3.2 mm sapphire rotor (B6939)

Box of 450 inserts

• Box of 400 tubes
• Caps not included

• Box of 100 tubes
• Caps not included

• Box of 30 tubes
• Caps not included

• Box of 9 tubes
• Caps not included

Tools for cap positioning on 7 mm MAS rotors

For casting 6 mm gels

• Replaces Part Number Z117559
• Pack of 100 certified tubes
• 178 mm (7") long tubes
• For routine use
• Includes 100 coded caps without holes

Tools for cap positioning on 2.5 mm Regular Wall and Thin Wall MAS rotors

For use with 3.2 mm caps for Regular Wall rotor:
• SP1 drive cap (HZ07306)
• ZrO₂ drive cap (HZ12372)

For use with Microtubes

• Compatible with New Era 10 mm O.D. 7" NMR Tube
• 1 tube liner with PTFE plug

For use with regular wall 2.5 mm MAS rotors (HZ05165)
Sample Volume: about 8 µL

• Replaces Part Number Z117724
• Pack of 100 certified tubes
• 103.5 mm (4") long tubes
• For routine use in SampleJet racks
• Includes 100 coded caps without holes

Box of 450 inserts

Box of 450 inserts

Quartz Precision Tube

Quartz Precision Tube

Quartz Precision Tube

Suprasil® Precision Tube

Suprasil® Precision Tube

Tool for sample compression into 3.2 mm Regular Wall MAS rotor

Tool for sample loading into 3.2 mm Regular Wall MAS rotor

For use with 4 mm MAS rotor (H6283)

Each set contains:
• Ten Kel-F inserts
• Ten sealing screws
• Ten plugs
• One set of tools (Fork screwdriver, blunt-ended screwdriver, extraction screw)

For use with 3.2 mm Thin Wall MAS rotors (HZ16252)

Suprasil® Economy Tube

Suprasil® Economy Tube

Quartz Economy Tube

Quartz Economy Tube

Suprasil® Economy Tube

Suprasil® Economy Tube

Suprasil® Economy Tube

For use with:
• 3.2 mm Regular Wall MAS rotors (HZ09244)
• 3.2 mm sapphire rotor (B6939)
• T° Range: (-30 to +70°C)

For use with 3.2 mm Thick Bottom, Regular Wall MAS rotors (HZ09243)

3% Chloroform (CHCl₃) in Acetone-d₆

• Box of 400 tubes
• Caps included

• Box of 100 tubes
• Caps included

• Box of 30 tubes
• Caps included

• Box of 9 tubes
• Caps included

For Bruker 10 mm O.D.

For Bruker 8 mm O.D.

For use with Microtubes

For use with Microtubes

For use with Microtubes

For use with Microtubes

For use with Microtubes

For use with 3.2 mm Thin Wall MAS rotors (HZ16252)

Tool for cap removal for 3.2 mm Regular and Thin Wall MAS rotor

0.0485 M Triphenylphosphate (TPP) in Acetone-d₆

0.05% Trifluorotoluene (TFT) in Chloroform-d

0.1 mg GDCl₃/mL D₂O with 1% H₂O + 0.1% CH₃OH ¹³C

0.1 mg GDCl₃/mL D₂O with 1% H₂O + 0.1% CH₃OH ¹³C

0.1 mg GDCl₃/mL D₂O with 1% H₂O + 0.1% CH₃OH ¹³C

0.0485 M Triphenylphosphat (TPP) in Acetone-d₆

0.0485 M Triphenylphosphate (TPP) in Acetone-d₆

85% Hexamethyldisiloxan (HMDSO) in Benzene-d₆

0.05% Trifluorotoluene (TFT) in Chloroform-d

0.1% Ethylbenzene (EB) in Chloroform-d

0.1% Ethylbenzene (EB) in Chloroform-d

0.1% Ethylbenzene (EB) in Chloroform-d

0.0485 M Triphenylphosphate (TPP) in Acetone-d₆

0.1 mg GDCl₃/mL D₂O with 1% H₂O + 0.1% CH₃OH ¹³C

0.05% Trifluorotoluene (TFT) in Chloroform-d

0.1% Ethylbenzene (EB) in Chloroform-d

99.8% Methanol-d₄

99.8% Methanol-d₄

1% Chloroform (CHCl₃) in Acetone-d₆

4% Methanol (CH₃OH) in Methanol-d₄

80% Glycol in DMSO-d₆

4% Methanol (CH₃OH) in Methanol-d₄

80% Glycol in DMSO-d₆

99.8% Methanol-d₄

Compatible with Bruker and Jeol probes

100 mg Cholesterylactetate + 0.5% TMS in Chloroform-d (100 mg Cholac)

Compatible with Bruker probes only

Compatible with Jeol probes only

Compatible with Varian probes only

40% Dioxane in Benzene-d₆

40% Dioxane in Benzene-d₆

For use with 4 mm High Speed MAS rotor only. Please refer to item HZ12360 for regular 4mm SP1 cap

For stretch from 5.4 mm to 4.2 mm

For use with 3.2 mm Thin Wall MAS rotors (HZ16252)
• T° Range: (-30 to +70°C)

Compatible with Bruker probes only

Compatible with Varian probes only

Compatible with Varian probes only

Compatible with Varian probes only