Search results for: '5 mm'
DISCONTINUTED (replaced by HZ16913) - 3.2 mm cap remover for Regular Wall rotor
HZ07410
3-6 weeksHas been replaced by HZ1691310 mm Heavy Wall Precision High Pressure NMR Tube, 7" (450 MHz)
513-7PVH-7$291.002-4 weeks• Precision NMR tube
• High Pressure
• Heavy Wall
• 7" long
• MHz Rating: 500 Mz10 mm Heavy Wall Precision High Pressure NMR Tube, 8" (450 MHz)
513-7PVH-8
2-4 weeks• Precision NMR tube
• High Pressure
• Heavy Wall
• 8" long
• MHz Rating: 450 Mz3 mm High Throughput NMR Tube, 8" - Pack of 50 with caps
WG-3000-8-50
2-4 weeks• Class B Borosilicate Glass
• 8" long
• Pack of 50 tubes with capsPTFE caps for 10 mm Tube, Pack of 25
WG-1264-10$211.802-4 weeks• For Precision Tube Only
• Material: PTFEPTFE caps for 3 mm Tube, Pack of 25
WG-1264-3$75.102-4 weeks• For Precision Tube Only
• Material: PTFEPTFE caps for 4 mm Tube, Pack of 25
WG-1264-4$84.302-4 weeks• For Precision Tube Only
• Material: PTFETE102 Low Temperature Aqueous Cell Spectroscopic Quality
WG-808-S-Q$2,447.602-4 weeksFor All TE102 or TE011Shaped Tubes kit
Z119964$1,984.903-6 weeksKit contains:
• Five Shaped tubes (Z106898)
• One shuttle for shaped tube (Z75327)
• Five caps for shaped tube (Z107144)150 mL Suprasil Large Volume Dewar Flask
WG-850-B-Q$1,428.202-4 weeksFor Bruker and Jeol instruments150 mL Suprasil Nitrogen Dewar Flask
WG-850-Q$1,428.202-4 weeksFor Micro-Now, Radio-Pan and Agilent instruments150 mL Suprasil Offset Nitrogen Dewar Flask
WG-853-B-Q$1,454.602-4 weeksFor Bruker and Jeol instrumentsPrecision Thin Wall Quartz Sleeve, 5.5 x 6.0 x 58.6 mm
NE-295-5A$111.504 - 6 weeksFor Bruker Late Model ProbesPrecision Thin Wall Quartz Sleeve, 5.8 x 6.1 x 54.5 mm
NE-295-5B$157.504 - 6 weeksFor Bruker Dual Flow ProbesSpherical NMR Bulb 18 µL, Pack of 10
529-A$67.402-4 weeksFits Wilmad Precision Thin Wall NMR TubesKel-F thread pin
HZ04800$29.303-6 weeksFor use with 4 mm HR-MAS rotor only (HZ05537, HZ05538, HZ07213) Material : PTFE , Sample Vol.: 12 µL, T° Range: (+10 to +50°C)3 mm High Throughput NMR Tube, 3" - Pack of 100 without caps
WG-3000-3
2-4 weeks• Class B Borosilicate Glass
• 3" long
• Pack of 1000 tubes without capsW Band Suprasil EPR Tube both ends open, 40 mm, Pack of 10
WG-213ST9S$209.902-4 weeks• For photochemistry studies
• Suprasil®
• Cutoff wavelength: 190 nmW Band Suprasil EPR Tube one end sealed, 40 mm, Pack of 10
WG-213ST9S-RB$261.502-4 weeks• For photochemistry studies
• Suprasil®
• Cutoff wavelength: 190 nmQ Band CFQ EPR Tube one end sealed, 100 mm, Pack of 10
WG-221T-RB$207.102-4 weeks• For photochemistry studies
• Cleared Fused QuartzQ
• Cutoff wavelength: 190 nmQ Band Suprasil EPR Tube both ends open, 100 mm, Pack of 10
WG-222T$253.502-4 weeks• For photochemistry studies
• Suprasil®
• Cutoff wavelength: 190 nmQ Band Suprasil EPR Tube one end sealed, 100 mm, Pack of 10
WG-222T-RB$294.802-4 weeks• For photochemistry studies
• Suprasil®
• Cutoff wavelength: 190 nmShigemi Slot Tubes kit
SBMS-K$1,830.002-4 weeksKit contains:
• Five Shigemi Slot Tubes (SBMS)
• One shuttle for Slot Tube (Z137538)50 µL PTFE spacer
H11087$248.803-6 weeksFor use with 4 mm HR-MAS rotor only (HZ07213)
Pack of:
• One 50 µL HR-MAS PTFE insert
• One M2x2 Kel-F thread pin (HZ04800)
• One M2x25 cylindric screw12 µL PTFE spacer
H8549$218.303-6 weeksFor use with 4 mm HR-MAS rotor only (HZ05537, HZ05538)
Pack of:
• One 12 µL HR-MAS PTFE insert
• One M2x2 Kel-F MAS thread pin (HZ04800)
• One M2x25 cylindric screw12 µL Kel-F spacer
H8548$219.703-6 weeksFor use with 4 mm HR-MAS rotor only (HZ05537, HZ05538)
Pack of:
• One 12 µL HR-MAS Kel-F insert
• One M2x2 Kel-F MAS thread pin (HZ04800)
• One M2x25 cylindric screwComplete Tip-Off Adapter/Valve system
NE-253-5$291.003 - 4 weeksContains:
• 1 Glass Body
• 1 PTFE Plug
‡ 2 PTFE-Clad O-Rings
‡ One Bushing/Heat Shield with O-Rings