Search results for: 'NMR'
3.2 mm Kel-F drive cap for Thin Wall rotor
HZ16908$254.901-3 weeksFor use with 3.2 mm Thin Wall MAS rotors (HZ16252)4 mm Si3N4 MAS rotor
K1911$1,150.601-3 weeks• Individual 4 mm Si3N4 MAS rotor (no caps included)
• For use with 4 mm caps: ZrO2 drive cap (HZ05951)7 mm ZrO2 MAS rotor + BN3 and Kel-F caps
K1921$1,044.001-3 weeksPack of:
• One 7 mm ZrO2 MAS rotor
• One 7 mm SP1 drive cap with hole
• One 7 mm Kel-F drive cap without hole
• One 7 mm Kel-F drive cap with hole7 mm ZrO2 CRAMPS rotor with Kel-F spacer + caps
K1921CR$903.703-6 weeksPack of:
• One 7 mm ZrO2 CRAMPS rotor
• Two 7 mm Kel-F drive caps without hole
• One cylindric screw M2x25
• One 7 mm CRAMPS Kel-F spacer4 mm Macor drive cap
K1935$206.80discontinued, please refer to H6304, HZ12360 or HZ05951 for alternative capsdiscontinued, please refer to H6304, HZ12360 or HZ05951 for alternative capsCap set tool for 7 mm MAS rotor
H148487$107.102-3 weeksTools for cap positioning on 7 mm MAS rotorsTool Kit for 0.7 mm MAS rotor
H149435$20,932.402-3 weeksIncludes :
• Cap Removal Tool
• Filling Tool
• Sample Packer
• Cap Set Tool
• Tool Insert2.5 mm SP1 drive cap for Regular Wall rotor (long stem)
HZ12600$161.202-3 weeksFor use with regular wall 2.5 mm MAS rotors (HZ05165)
Sample Volume: about 8 µL3.2 mm Regular and Thin Wall rotor cap remover
HZ16913$957.602-3 weeksTool for cap removal for 3.2 mm Regular and Thin Wall MAS rotor4 mm ZrO2 MAS rotor + Kel-F & SP1 caps
K1910$991.201-3 weeksPack of:
• One 4 mm ZrO2 MAS rotor (H6283)
• Two 4 mm Kel-F drive caps (H6304)
• One 4 mm SP1 drive caps (HZ12360)3.2 mm Thin Wall ZrO2 MAS rotor + open one end, + caps
HZ16916$2,147.601-3 weeksPack of
• One 3.2 mm thin wall MAS rotor
• Three SP1 drive caps3.2 mm SP1 bottom cap for Thin Wall rotor
HZ16254$275.603-6 weeksFor use with 3.2 mm Thin Wall MAS rotors (HZ16252)
• T° Range: (-30 to +70°C)DISCONTINUTED (replaced by HZ16913) - 3.2 mm cap remover for Regular Wall rotor
HZ07410
3-6 weeksHas been replaced by HZ169133.2 mm SP1 drive cap for Regular Wall rotor
HZ07306$193.50StockFor use with:
• 3.2 mm Regular Wall MAS rotors (HZ09244)
• 3.2 mm sapphire rotor (B6939)
• T° Range: (-30 to +70°C)3.2 mm ZrO2 drive cap for Regular Wall rotor
HZ12372$1,474.90Delivery time to be confirmedFor use with:
• 3.2 mm Regular Wall rotor (HZ09244)
• 3.2 mm sapphire rotor (B6939)10mm Symmetrical Microtube Matched with DMSO
DMS-010
2 - 4 weeks• For Bruker and Jeol probe
• 10mm Symmetrical Microtube
• Matched with DMSODISCONTINUED (replaced by HZ14471) - 3.2 mm sapphire rotor
B6939
1-3 weeksFor use with 3.2 mm caps for Regular Wall rotor:
• SP1 drive cap (HZ07306)
• ZrO2 drive cap (HZ12372)3.2 mm silicone soft plug kit
B7089$2,142.703-6 weeksKit contains:
• Ten silicone soft plugs with silica tubing
• One 3.2mm soft plug depth gauge
• One 3.2mm soft plug removal tool3.2 mm sapphire DNP rotor + caps
H13861$3,727.201-3 weeksPack of:
• One 3.2 mm sapphire rotor (B6939)
• One 3.2 mm SP1 drive cap (HZ07306)
• Two 3.2 mm ZrO2 drive caps (HZ12372)5.0 mm SampleJet Shuttle
Z105515$2,906.30StockShuttle to hold 5.0 mm tubes for use with SampleJet system3.0 mm SampleJet Shuttle
Z105909$2,753.30StockShuttle to hold 3.0 mm tubes for use with SampleJet system1.7 mm SampleJet Shuttle
Z106558$351.90StockShuttle to hold 1.7 mm tubes for use with SampleJet system5 mm SampleJet Caps without hole with code (Pack of 100)
Z106779$91.80StockCoded caps for use with SampleJet system3 mm SampleJet Caps without hole with code (Pack of 100)
Z107163$91.803-6 weeksCoded caps for SampleJet use1.0 mm SampleJet Shuttle
Z107648$351.90StockShuttle to hold 1.0 mm tubes for use with SampleJet system3.2 mm sapphire rotor
HZ14471$1,741.101-3 weeksFor use with 3.2 mm caps for Regular Wall rotor:
• SP1 drive cap (HZ07306)
• ZrO2 drive cap (HZ12372)1.0 mm Capillary Tube (400 MHz), Pack of 10
WG-1364-1$39.902-4 weeks• 75 mm long
• Pyrex®
• Sealed at one end1.7 mm Capillary Tube (400 MHz), Pack of 10
WG-1364-1.7-203M$16.802-4 weeks• 203 mm long
• Pyrex®
• Sealed at one end1.7 mm Capillary Tube (400 MHz), Pack of 10
WG-1364-1.7-5$47.002-4 weeks• 5" long
• Pyrex®
• Sealed at one end1.0 mm Capillary Tube (400 MHz), Pack of 10
WG-1364-1-203M$17.902-4 weeks• 203 mm long
• Pyrex®
• Sealed at one end2.0 mm Capillary Tube (400 MHz), Pack of 10
WG-1364-2$46.602-4 weeks• 100 mm long
• Pyrex®
• Sealed at one end2.5 mm Capillary Tube (400 MHz), Pack of 10
WG-1364-2.5A$54.502-4 weeks• 100 mm long
• Pyrex®
• Sealed at one end
• For Agilent Cold Probe2.0 mm Capillary Tube (400 MHz), Pack of 10
WG-1364-2-203M$20.502-4 weeks• 203 mm long
• Pyrex®
• Sealed at one end1.0 mm Capillary Tube (400 MHz), Pack of 10
WG-1365-1$2.402-4 weeks• 100 mm long
• Pyrex®
• Both Ends Open1.7 mm Capillary Tube (400 MHz), Pack of 10
WG-1365-1.7$3.102-4 weeks• 100 mm long
• Pyrex®
• Both Ends Open2 mm Capillary Tube (400 MHz), Pack of 10
WG-1365-2$2.802-4 weeks• 100 mm long
• Pyrex®
• Both Ends Open2.5 mm Capillary Tube (400 MHz), Pack of 10
WG-1365-2.5A$3.002-4 weeks• 100 mm long
• Pyrex®
• Both Ends Open
• For Agilent Cold Probe1.7 mm Capillary Tube (400 MHz), Pack of 10
WG-1364-1.7$38.702-4 weeks• 100 mm long
• Pyrex®
• Sealed at one endPTFE caps for 10 mm Tube, Pack of 25
WG-1264-10$211.802-4 weeks• For Precision Tube Only
• Material: PTFEPTFE caps for 3 mm Tube, Pack of 25
WG-1264-3$75.102-4 weeks• For Precision Tube Only
• Material: PTFEPTFE caps for 4 mm Tube, Pack of 25
WG-1264-4$84.302-4 weeks• For Precision Tube Only
• Material: PTFEPTFE caps for 5 mm Tube, Pack of 25
WG-1264-5$67.202-4 weeks• For Precision Tube Only
• Material: PTFEComplete Gel Press System, 5.4 mm
NE-372-5.4/4.2
4 - 6 weeksIncludes:
• Piston Driver
• Cap
• Piston
• Gel Chamber
• FunnelComplete Gel Press System, 5 mm
NE-372-5/4.2
4 - 6 weeksIncludes:
• Piston Driver
• Cap
• Piston
• Gel Chamber
• FunnelComplete Gel Press System, 6 mm
NE-372-6/4.2
4 - 6 weeksIncludes:
• Piston Driver
• Cap
• Piston
• Gel Chamber
• FunnelMulti Tube Jet Washer/Dryer Complete for 3-5 mm Tubes, silicon joint
WG-1209-1$446.402-4 weeks#9 Silicon JointMulti Tube Jet Washer/Dryer Complete for 3-5 mm Tubes, ISO 29/32 Taper Joint
WG-1209-J2$446.402-4 weeksISO 29/32 Taper Joint4 mm Thin Wall Suprasil Precision Quick Pressure EPR Tube, 8"
734-QPV-7$407.102-4 weeks• Precision EPR tube
• Quick Pressure Valve
• Thin Wall
• 8" long5 mm Complete Coaxial System
516-CC-5$75.502-4 weeks• System includes Inner Insert and Flat Bottom Outer Tube
• Field Compatibility: Up to 600 MHz10 mm Thin Wall Suprasil Precision Quick Pressure EPR Tube, 8"
733-3QPV-7
2-4 weeks• Precision EPR tube
• Quick Pressure Valve
• Thin Wall
• 8" long5 mm Precision Omni-Fit Suprasil EPR Tube, 8"
700-PV-7$466.502-4 weeks• Precision EPR tube
• Omni-Fit tube only
• 8" long
•