NMR Consumables
-
-
-
-
-
-
Kel-F thread pin
HZ04800$29.303-6 weeksFor use with 4 mm HR-MAS rotor only (HZ05537, HZ05538, HZ07213) Material : PTFE , Sample Vol.: 12 µL, T° Range: (+10 to +50°C) -
-
-
-
Multi Tube Jet Washer/Dryer Complete for 3-5 mm Tubes, ISO 29/32 Taper Joint
WG-1209-J2$446.402-4 weeksISO 29/32 Taper Joint -
Multi Tube Jet Washer/Dryer Complete for 3-5 mm Tubes, silicon joint
WG-1209-1$446.402-4 weeks#9 Silicon Joint -
-
-
-
Nut And Ferrule
NE-PCAV-FN$15.004 - 6 weeksFor Use with Pressure Valve (PCAV) and Controlled Atmosphere (CAV) Tubes -
-
-
-
-
-
-
-
-
-
-
-
-
-
Precision Thin Wall Quartz Sleeve, 5.5 x 6.0 x 58.6 mm
NE-295-5A$111.504 - 6 weeksFor Bruker Late Model Probes -
Precision Thin Wall Quartz Sleeve, 5.8 x 6.1 x 54.5 mm
NE-295-5B$157.504 - 6 weeksFor Bruker Dual Flow Probes -
Precision Thin Wall Quartz Sleeve, 5.8 x 6.1 x 64 mm
NE-295-V-5$157.504 - 6 weeksFor Varian Probes -
-
-
-
PTFE caps for 10 mm Tube, Pack of 25
WG-1264-10$211.802-4 weeks• For Precision Tube Only
• Material: PTFE -
PTFE caps for 3 mm Tube, Pack of 25
WG-1264-3$75.102-4 weeks• For Precision Tube Only
• Material: PTFE -
PTFE caps for 4 mm Tube, Pack of 25
WG-1264-4$84.302-4 weeks• For Precision Tube Only
• Material: PTFE -
-
-
PTFE caps for 5 mm Tube, Pack of 25
WG-1264-5$67.202-4 weeks• For Precision Tube Only
• Material: PTFE -
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Pyrex CAV Glass Adapter
NE-CAV-A$18.204 - 6 weeksFor Use with Controlled Atmosphere Valve (CAV) Tubes -
Pyrex PCAV Glass Adapter
NE-CAV-JA$48.604 - 6 weeksFor Use with Controlled Atmosphere Valve (CAV) Tubes -
Q Band CFQ EPR Tube one end sealed, 100 mm, Pack of 10
WG-221T-RB$207.102-4 weeks• For photochemistry studies
• Cleared Fused QuartzQ
• Cutoff wavelength: 190 nm -
Q Band Suprasil EPR Tube both ends open, 100 mm, Pack of 10
WG-222T$253.502-4 weeks• For photochemistry studies
• Suprasil®
• Cutoff wavelength: 190 nm -
Q Band Suprasil EPR Tube one end sealed, 100 mm, Pack of 10
WG-222T-RB$294.802-4 weeks• For photochemistry studies
• Suprasil®
• Cutoff wavelength: 190 nm -
-
-
-
-
-
-
-
-
-
-
-
-
Set of 10 Kel-F inserts for 4 mm MAS rotor
B4493$272.001 - 3 weeksFor use with 4 mm MAS rotor (H6283)
Each set contains:
• Ten Kel-F inserts
• Ten sealing screws
• Ten plugs
• One set of tools (Fork screwdriver, blunt-ended screwdriver, extraction screw) -
Set of 100 Kel-F inserts for 4 mm MAS rotor
B4495
Delivery delay to be confirmedFor use with 4 mm MAS rotor (H6283)
Each set contains:
• 100 Kel-F inserts
• 100 sealing screws
• 100 plugs
• One set of tools (Fork screwdriver, blunt-ended screwdriver, extraction screw) -
Set of 250 Kel-F inserts for 4 mm MAS rotor
B4496
Delivery delay to be confirmedFor use with 4 mm MAS rotor (H6283)
Each set contains:
• 250 Kel-F inserts
• 250 sealing screws
• 250 plugs
• One set of tools (Fork screwdriver, blunt-ended screwdriver, extraction screw) -
-
-
-
-
-
Shaped Tubes kit
Z119964$1,984.903-6 weeksKit contains:
• Five Shaped tubes (Z106898)
• One shuttle for shaped tube (Z75327)
• Five caps for shaped tube (Z107144) -
-
Shigemi Slot Tubes kit
SBMS-K$1,830.002-4 weeksKit contains:
• Five Shigemi Slot Tubes (SBMS)
• One shuttle for Slot Tube (Z137538) -
-
-
-
-
Spherical NMR Bulb 18 µL, Pack of 10
529-A$67.402-4 weeksFits Wilmad Precision Thin Wall NMR Tubes -
-
-
-
-
-
-
-
-
-
-
-
-
-
-
TE102 Low Temperature Aqueous Cell Spectroscopic Quality
WG-808-S-Q$2,447.602-4 weeksFor All TE102 or TE011 -
-
TE102 Standard Aqueous Cell Spectroscopic Quality
WG-812-Q$819.102-4 weeksFor All TE102 except JEOL -
TE102 Standard Aqueous Cell Spectroscopic Quality
WG-812-S-Q$2,061.102-4 weeksFor All TE102 except JEOL -
TFE Plug with knob, O-rings, nut and ferrule
NE-CAV-P$83.604 - 6 weeksFor Use with Controlled Atmosphere Valve (CAV) Tubes -
TFE Plug with knob, O-rings, nut and ferrule
NE-PCAV-P$107.304 - 6 weeksFor Use with Pressure Valve (PCAV) Tubes -
-
-
-
Tip-Off Nylon Bushing/Heat Shield with O-rings
NE-253-B$40.303 - 4 weeksContains:
• 1 Bushing/Heat Shield with O-Rings -
Tip-Off PTFE Plug with PTFE Clad O-Rings
NE-253-P$66.803 - 4 weeksContains:
• 1 PTFE Plug
‡ 2 PTFE-Clad O-Rings -
-
Tool for HR-MAS spacer
HZ04875$33.503-6 weeksFor use with 4mm HR-MAS rotor only (HZ05537, HZ05538, HZ07213) -
Tool Kit for 0.7 mm MAS rotor
H149435$20,823.302-3 weeksIncludes :
• Cap Removal Tool
• Filling Tool
• Sample Packer
• Cap Set Tool
• Tool Insert -
Tool Kit for 3.2 mm Thin Wall rotor
B136904$981.50StockKit contains:
• 3.2 mm cap remover for Thin Wall rotor
• 3.2 mm filling funnel for Thin Wall rotor
• 3.2 mm cap set tool for Thin Wall rotor
• 3.2 mm packer for Thin Wall rotor -
Tool Kit for 50 mL HR-MAS rotor
B2950$43.903-6 weeksFor use with 50 µL HR-MAS rotor only (HZ07213)
Kit contains:
• One extration tool
• One scredriver
• One depth gauge -
-
-
-
-
-
-
-
-
Valve Body for Heavy Wall Tube
NE-CAV5-H-G$113.704 - 6 weeksFor Use with Pressure Valve (PCAV) and Controlled Atmosphere (CAV) Tubes -
Valve Body for Medium Wall Tube
NE-CAV5-M-G$103.404 - 6 weeksFor Use with Pressure Valve (PCAV) and Controlled Atmosphere (CAV) Tubes -
Valve Body for Thin Wall Tube
NE-CAV5-G$100.804 - 6 weeksFor Use with Pressure Valve (PCAV) and Controlled Atmosphere (CAV) Tubes -
Viton Retaining O-ring
NE-CAV-RO$3.804 - 6 weeksFor Use with Pressure Valve (PCAV) and Controlled Atmosphere (CAV) Tubes -
Viton Sealing O-ring
NE-CAV-SO$3.804 - 6 weeksFor Use with Pressure Valve (PCAV) and Controlled Atmosphere (CAV) Tubes -
-
W Band Suprasil EPR Tube both ends open, 40 mm, Pack of 10
WG-213ST9S$209.902-4 weeks• For photochemistry studies
• Suprasil®
• Cutoff wavelength: 190 nm -
W Band Suprasil EPR Tube one end sealed, 40 mm, Pack of 10
WG-213ST9S-RB$261.502-4 weeks• For photochemistry studies
• Suprasil®
• Cutoff wavelength: 190 nm