Search results for: '5 mm NMR'
-
Hexafluoroisopropanol-d2
Ref. Packaging I.E.(%) Price Add to... D052CB 2 x 1 mL 99% D $469.30D052FD 1 x 5 mL 99% D $964.90 -
-
Tool Kit for 3.2 mm Thin Wall rotor
B136904$1,030.60StockKit contains:
• 3.2 mm cap remover for Thin Wall rotor
• 3.2 mm filling funnel for Thin Wall rotor
• 3.2 mm cap set tool for Thin Wall rotor
• 3.2 mm packer for Thin Wall rotor -
3 mm 15N sensitivity & 13C pulse calibration reference tube
Z10039$279.403-6 weeks90% Formamide in DMSO-d6 -
10 mm 15N sensitivity & 13C pulse calibration reference tube
Z10188$364.203-6 weeks90% Formamide in DMSO-d6 -
4 mm Thin Wall Suprasil Precision Pressure EPR Tube, 8"
734-PV-7$396.402-4 weeks• Precision NMR tube
• High Pressure
• Thin Wall
• 8" long -
Cap set tool for 7 mm MAS rotor
H148487$107.102-3 weeksTools for cap positioning on 7 mm MAS rotors -
5 mm Thin Wall Suprasil Precision Low Pressure EPR Tube, 8"
722-LPV-7$291.902-4 weeks• Suprasil Precision Tube
• Thin Wall
• 8" long -
-
10 mm Thin Wall Suprasil Precision Pressure EPR Tube, 8"
733-3PV-7
2-4 weeks• Precision NMR tube
• High Pressure
• Thin Wall
• 8" long -
3.2 mm sapphire DNP rotor + caps
H13861Special Price $3,168.12 Regular Price $3,727.201-3 weeksPack of:
• One 3.2 mm sapphire rotor (B6939)
• One 3.2 mm SP1 drive cap (HZ07306)
• Two 3.2 mm ZrO2 drive caps (HZ12372) -
8 mm Shigemi Advanced microtube set matched with Methanol-d4
MMS-008TB$485.002-4 weeksCompatible with Bruker probes only -
8 mm Shigemi Advanced microtube set matched with Methanol-d4
MMS-008TV$485.002-4 weeksCompatible with Varian probes only -
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Combination pH electrode with BNC connector (also known as #5 connector)
6030-02-BNC$1,159.702-4 weeksFor use in 5mm thin walled NMR tubes up to 8 inches in length -
10 mm 1H lineshape reference tube (3% Chloroform)
Z10231$449.603-6 weeks3% Chloroform (CHCl3) in Acetone-d6 -
-
-
3 mm 1H lineshape reference tube (3% Chloroform)
Z10031$311.803-6 weeks3% Chloroform (CHCl3) 0.2% TMS in Acetone-d6 -
3.2 mm ZrO2 drive cap for Regular Wall rotor
HZ12372$1,474.90Delivery time to be confirmedFor use with:
• 3.2 mm Regular Wall rotor (HZ09244)
• 3.2 mm sapphire rotor (B6939) -
1.7 mm Capillary Tube (400 MHz), Pack of 10
WG-1364-1.7-203M$16.802-4 weeks• 203 mm long
• Pyrex®
• Sealed at one end -
3.2 mm sample packer for Regular Wall rotor
HZ07607$140.803-6 weeksTool for sample compression into 3.2 mm Regular Wall MAS rotor -
3.2 mm filling tool for Regular Wall rotor
HZ07608$40.403-6 weeksTool for sample loading into 3.2 mm Regular Wall MAS rotor -
-
-
10 mm Shigemi microtube set matched with D2O
BMS-010BJ$510.002-4 weeksCompatible with Bruker and Jeol probes -
3.2 mm PTFE Insert for Regular Wall rotor
HZ13618$48.303-6 weeksFor use with 3.2 mm Thick Bottom, Regular Wall MAS rotors (HZ09243) -
-
-
-
-
-
8 mm Shigemi microtube set matched with D2O
BMS-008BJ$440.002-4 weeksCompatible with Bruker and Jeol probes -
8 mm Shigemi microtube set matched with D2O
BMS-008V$440.002-4 weeksCompatible with Varian probes only -
10 mm Shigemi microtube set matched with D2O
BMS-010V$565.002-4 weeksCompatible with Varian probes only -
10 mm Shigemi microtube set matched with Chloroform-d
CMS-010BJ$510.002-4 weeksCompatible with Bruker and Jeol probes -
10 mm Shigemi microtube set matched with DMSO-d6
DMS-010BJ$525.002-4 weeksCompatible with Bruker and Jeol probes -
8 mm Pyrex Thin Wall NMR Tube, 7" (400-500 MHz)
NE-H8-7$43.103 - 4 weeks• Thin Wall
• Class A Borosilicate Glass
• 7" long
• 1 tube with cap
• MHz Rating: 400 - 500 MHz -
8 mm Pyrex Thin Wall NMR Tube, 8" (400-500 MHz)
NE-H8-8$45.303 - 4 weeks• Thin Wall
• Class A Borosilicate Glass
• 8" long
• 1 tube with cap
• MHz Rating: 400 - 500 MHz -
15 mm Pyrex Thin Wall NMR Tube, 7" (200-300 MHz)
NE-L15-7
4 - 6 weeks• Thin Wall
• Class A Borosilicate Glass
• 7" long
• 1 tube with cap
• MHz Rating: 200 - 300 MHz -
16 mm Pyrex Thin Wall NMR Tube, 7" (200-300 MHz)
NE-L16-7
4 - 6 weeks• Thin Wall
• Class A Borosilicate Glass
• 7" long
• 1 tube with cap
• MHz Rating: 200 - 300 MHz -
20 mm Pyrex Thin Wall NMR Tube, 7" (200-300 MHz)
NE-L20-7
4 - 6 weeks• Thin Wall
• Class A Borosilicate Glass
• 7" long
• 1 tube with cap
• MHz Rating: 200 - 300 MHz -
8 mm Pyrex Thin Wall NMR Tube, 7" (100-300 MHz)
NE-L8-7$32.304 - 6 weeks• Thin Wall
• Class A Borosilicate Glass
• 7" long
• 1 tube with cap
• MHz Rating: 100 - 300 MHz -
8 mm Pyrex Thin Wall NMR Tube, 8" (100-300 MHz)
NE-L8-8$34.104 - 6 weeks• Thin Wall
• Class A Borosilicate Glass
• 8" long
• 1 tube with cap
• MHz Rating: 100 - 300 MHz -
4 mm Shigemi microtube set matched with D2O
BMS-004B$175.00StockCompatible with Bruker probes only -
-
4 mm Shigemi microtube set matched with D2O
BMS-004V$175.00StockCompatible with Varian probes only -
3.2 mm SP1 drive cap for Thin Wall rotor
HZ16253$301.901-3 weeksFor use with 3.2 mm Thin Wall MAS rotors (HZ16252) -
8 mm PTFE/Silicone Septa, Pack of 12
NE-3208
3 - 4 weeks• For 5 mm Screw Thread Tubes
• Cap not included -
-
-
-
-
8 mm Solid Top Thread Cap, Pack of 12
NE-3108T
3 - 4 weeks• For 5 mm Screw Thread Tubes
• Septa included -
-
-
3 mm High Throughput NMR Tube, 8" - Pack of 50 with caps
WG-3000-8-50
2-4 weeks• Class B Borosilicate Glass
• 8" long
• Pack of 50 tubes with caps -
8 mm Shigemi microtube set matched with Chloroform-d
CMS-008BJ$440.002-4 weeksCompatible with Bruker and Jeol probes -
8 mm Shigemi microtube set matched with Chloroform-d
CMS-008V$440.002-4 weeksCompatible with Varian probes only -
10 mm Shigemi microtube set matched with Chloroform-d
CMS-010V$565.002-4 weeksCompatible with Varian probes only -
8 mm Shigemi microtube set matched with DMSO-d6
DMS-008BJ$460.002-4 weeksCompatible with Bruker and Jeol probes -
8 mm Shigemi microtube set matched with DMSO-d6
DMS-008V$460.002-4 weeksCompatible with Varian probes only -
10 mm Shigemi microtube set matched with DMSO-d6
DMS-010V$565.002-4 weeksCompatible with Varian probes only -
Economy U-Shaped 5 mm Single Tube Washer
WG-1207-J5$151.502-4 weeks• With 24/40 Inner Joint
• For 7" Tubes -
-
15 mm Pyrex Medium Wall NMR Tube, 7" (200-300 MHz)
NE-L15-M-7
4 - 6 weeks• Medium Wall
• Class A Borosilicate Glass
• 7" long
• 1 tube with cap
• MHz Rating: 200 - 300 MHz -
4 mm Shigemi microtube set matched with Chloroform-d
CMS-004B$175.002-4 weeksCompatible with Bruker probes only -
4 mm Shigemi microtube set matched with Chloroform-d
CMS-004J$175.002-4 weeksCompatible with Jeol probes only -
4 mm Shigemi microtube set matched with Chloroform-d
CMS-004V$175.002-4 weeksCompatible with Varian probes only -
4 mm Shigemi microtube set matched with DMSO-d6
DMS-004B$190.002-4 weeksCompatible with Bruker probes only -
4 mm Shigemi microtube set matched with DMSO-d6
DMS-004J$190.002-4 weeksCompatible with Jeol probes only -
4 mm Shigemi microtube set matched with DMSO-d6
DMS-004V$190.002-4 weeksCompatible with Varian probes only -
-
-
2.5 mm Shigemi microtube set matched with D2O
BMS-0025$205.002-4 weeksCompatible with Bruker probes only -
3 mm Shigemi microtube set matched with D2O
BMS-003$175.00StockCompatible with all manufacturers probes -
10 mm Heavy Wall Controlled Atmosphere Valve Pyrex NMR Tube (300-500 MHz)
NE-CAV10-H-170$233.902 - 3 weeks -
8 mm Open Top Thread Cap, Pack of 12
NE-3008
3 - 4 weeks• For 5 mm Screw Thread Tubes
• Septa not included -
3.2 mm Kel-F drive cap for Thin Wall rotor
HZ16908$254.901-3 weeksFor use with 3.2 mm Thin Wall MAS rotors (HZ16252) -
-
-
-
-
-
-
3 mm Shigemi microtube set matched with Chloroform-d
CMS-003$175.002-4 weeksCompatible with all manufacturers probes -
3 mm Shigemi microtube set matched with DMSO-d6
DMS-003$190.002-4 weeksCompatible with all manufacturers probes -
3.2 mm SP1 drive cap for Regular Wall rotor
HZ07306$193.50StockFor use with:
• 3.2 mm Regular Wall MAS rotors (HZ09244)
• 3.2 mm sapphire rotor (B6939)
• T° Range: (-30 to +70°C) -
3.2 mm Regular and Thin Wall rotor cap remover
HZ16913$957.602-3 weeksTool for cap removal for 3.2 mm Regular and Thin Wall MAS rotor -
3.2 mm sapphire rotor
B6939$1,741.101-3 weeksFor use with 3.2 mm caps for Regular Wall rotor:
• SP1 drive cap (HZ07306)
• ZrO2 drive cap (HZ12372) -
2.5 mm Shigemi microtube set matched with Chloroform-d
CMS-0025$205.002-4 weeksCompatible with Bruker probes only -
2.5 mm Shigemi microtube set matched with DMSO-d6
DMS-0025$205.002-4 weeksCompatible with Bruker probes only -
Set of 10 Kel-F inserts for 4 mm MAS rotor
B4493$322.501 - 3 weeksFor use with 4 mm MAS rotor (H6283)
Each set contains:
• Ten Kel-F inserts
• Ten sealing screws
• Ten plugs
• One set of tools (Fork screwdriver, blunt-ended screwdriver, extraction screw) -
-
8 mm Solid Top Thread Cap With Rubber Liner, Pack of 12
NE-3108
3 - 4 weeks• For 5 mm Screw Thread Tubes
• Septa included -
8 mm Shigemi Advanced microtube set matched with D2O
BMS-008TB$460.002-4 weeksCompatible with Bruker probes only -
8 mm Shigemi Advanced microtube set matched with D2O
BMS-008TV$460.002-4 weeksCompatible with Varian probes only -
-
8 mm Shigemi Advanced microtube set matched with Chloroform-d
CMS-008TB$460.002-4 weeksCompatible with Bruker probes only -
8 mm Shigemi Advanced microtube set matched with Choroform-d
CMS-008TV$460.002-4 weeksCompatible with Varian probes only -
8 mm Shigemi Advanced microtube set matched with DMSO-d6
DMS-008TB$485.002-4 weeksCompatible with Bruker probes only -
8 mm Shigemi Advanced microtube set matched with DMSO-d6
DMS-008TV$485.002-4 weeksCompatible with Varian probes only -
2.5 mm Capillary Tube (400 MHz), Pack of 10
WG-1364-2.5A$54.502-4 weeks• 100 mm long
• Pyrex®
• Sealed at one end
• For Agilent Cold Probe -
3.2 mm cap set tool for Regular and Thin Wall rotors
HZ16621$56.603-6 weeksTools for cap positioning on 3.2 mm Regular Wall and Thin Wall MAS rotors -
-
-
3.2 mm SP1 bottom cap for Thin Wall rotor
HZ16254$275.603-6 weeksFor use with 3.2 mm Thin Wall MAS rotors (HZ16252)
• T° Range: (-30 to +70°C) -
4 mm SP1 cap for High Speed rotor
HZ06427$323.40StockFor use with 4 mm High Speed MAS rotor only. Please refer to item HZ12360 for regular 4mm SP1 cap -
-
-
-
-
-
4 mm Medium Wall Suprasil Precision Low Pressure EPR Tube, 250 mm
727-LPV-250M
2-4 weeks• Suprasil Precision Tube
• Medium Wall
• 250 mm long -
5 mm Thin Wall Suprasil Screw Cap EPR Tube, 7"
722-TR-7$204.102-4 weeks• Precision Quartz EPR tube
• Screw-Cap
• Thin Wall
• 7" long -
3 mm High Throughput NMR Tube, 3" - Pack of 100 without caps
WG-3000-3
2-4 weeks• Class B Borosilicate Glass
• 3" long
• Pack of 1000 tubes without caps -
10 mm Thin Wall Controlled Atmosphere Valve Pyrex NMR Tube (300-500 MHz)
NE-CAV10-170$162.702 - 3 weeks -
10 mm Medium Wall Controlled Atmosphere Valve Pyrex NMR Tube (300-500 MHz)
NE-CAV10-M-170$180.702 - 3 weeks -
3 and 4 mm White Rubber Septa, Precision, Pack of 100
WG-3889-100$82.702-4 weeks• For Precision NMR tube
• Color: White -
-
-
-
13C, 15N SH3 in 1.3mm Bruker rotor
CCN100521P
3 - 6 weeks• SRC Homology 3 domain (SH3)
• Number of residues: 62
• Protein size: 5.6 kDa
• Labeling: 13C, 15N -
Complete Gel Press System, 5.4 mm
NE-372-5.4/4.2
4 - 6 weeksIncludes:
• Piston Driver
• Cap
• Piston
• Gel Chamber
• Funnel -
-
13C, 15N, D SH3 in 1.3mm Bruker rotor
CCND100521P
3 - 6 weeks• SRC Homology 3 domain (SH3)
• Number of residues: 62
• Protein size: 5.6 kDa
• Labeling: 13C, 15N, D -
-
-
-
3 mm Thin Wall Suprasil Precision EPR tube, 159 mm
725-PQ-159M$65.902-4 weeksSuprasil® Precision Tube -
10 mm Thin Wall Suprasil Precision EPR tube, 200 mm
733-3PQ-200M$171.202-4 weeksSuprasil® Precision Tube -
4 mm Thin Wall Suprasil Precision EPR tube, 250 mm
735-PQ-250M$161.702-4 weeksSuprasil® Precision Tube -
-
3.2 mm Thick Bottom, Regular Wall ZrO2 MAS rotor + caps + PTFE spacer
HZ13706$1,604.101-3 weeksPack of:
• One 3.2mm Thick Bottom, Regular Wall ZrO2 MAS rotor (HZ09243)
• One 3.2mm SP1 drive cap (HZ07306)
• Two 3.2mm Kel-F drive cap (HZ07308)
• One PTFE spacer (HZ13618) -
13C, 15N Ubiquitin in 3.2 mm Bruker rotor
CCND100623P
3 - 6 weeks• Full length Ubiquitin (Residue 1-76)
• Protein size: 6.8 kDa
• Labeling: 13C, 15N -
13C, 15N GB1 in 3.2 mm Bruker rotor
CCN100323P
3 - 6 weeks• B-1 Immunoglobulin G Binding Domain (GB1)
• Residues 303-357 of the protein G, with T303Q mutation
• Size: 6.2 kDa
• Labeling: 13C, 15N -
13C, 15N, D Ubiquitin in 3.2 mm Bruker rotor
CCN100623P
3 - 6 weeks• Full length Ubiquitin (Residue 1-76)
• Protein size: 6.8 kDa
• Labeling: 13C, 15N, D -
-
13C, 15N, D GB1 in 3.2 mm Bruker rotor
CCND100323P
3 - 6 weeks• B-1 Immunoglobulin G Binding Domain (GB1)
• Residues 303-357 of the protein G, with T303Q mutation
• Size: 6.2 kDa
• Labeling: 13C, 15N, D -
4 mm Medium Wall Suprasil Precision Low Pressure EPR Tube, 250 mm
727-LPV-250M
2-4 weeks• Suprasil Precision Tube
• Medium Wall
• 250 mm long -
-
-
-
-
-
-
-
-
-
-
-
4 mm Macor drive cap
K1935$206.80discontinued, please refer to H6304, HZ12360 or HZ05951 for alternative capsdiscontinued, please refer to H6304, HZ12360 or HZ05951 for alternative caps -
-
-
-
-
-
-
-
-
-
15N Microcrystalline Ubiquitin
CN10063P5
3 - 6 weeks• 5 mg
• Full length Ubiquitin (Residue 1-76)
• Protein size: 6.8 kDa
• Labeling: 15N -
-
-
-
-
15N Ubiquitin in Solution
CN10064P5
3 - 6 weeks• 5 mg
• Full length Ubiquitin (Residue 1-76)
• Protein size: 6.8 kDa
• Labeling: 15N -
DISCONTINUED 3.2 mm Thin Wall ZrO2 MAS rotor, open on both ends + caps
H163649
1-3 weeksPlease consult product number HZ16916 or H12135 as an alternative -
-
-
-
-
-
-
-
-
13C, 15N Microcrystalline Ubiquitin
CCN10063P5
3 - 6 weeks• 5 mg
• Full length Ubiquitin (Residue 1-76)
• Protein size: 6.8 kDa
• Labeling: 13C, 15N -
-
-
-
-