Search results for: 'NE-5-CIC 5 mm Pyrex coaxial insert cell tube for Bruker'
-
Economy U-Shaped 10 mm Single Tube Washer
WG-1207-J10$173.102-4 weeks• With 24/40 Inner Joint
• For 7" Tubes -
-
2.5 mm Shigemi microtube set matched with D2O
BMS-0025$205.002-4 weeksCompatible with Bruker probes only -
-
5 mm Thin Wall Precision High Pressure NMR Tube, 7" (300 MHz)
507-PV-7
2-4 weeks• Precision NMR tube
• High Pressure
• Thin Wall
• 7" long
• MHz Rating: 300 Mz -
8 mm Shigemi microtube set matched with DMSO-d6
DMS-008BJ$460.002-4 weeksCompatible with Bruker and Jeol probes -
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Valve Body for Thin Wall Tube
NE-CAV5-G$100.804 - 6 weeksFor Use with Pressure Valve (PCAV) and Controlled Atmosphere (CAV) Tubes -
-
-
-
2.5 mm Shigemi microtube set matched with Chloroform-d
CMS-0025$205.002-4 weeksCompatible with Bruker probes only -
2.5 mm Shigemi microtube set matched with DMSO-d6
DMS-0025$205.002-4 weeksCompatible with Bruker probes only -
5 mm Low Pressure / Vacuum NMR Tube, 7" (500 MHz)
528-LPV-7$131.502-4 weeks• Precision NMR tube
• Low Pressure / Vacuum
• 7" long
• MHz Rating: 500 Mz -
5 mm Low Pressure / Vacuum NMR Tube, 8" (500 MHz)
528-LPV-8$131.502-4 weeks• Precision NMR tube
• Low Pressure / Vacuum
• 8" long
• MHz Rating: 500 Mz -
5 mm Low Pressure / Vacuum NMR Tube, 7" (600 MHz)
535-LPV-7$138.902-4 weeks• Precision NMR tube
• Low Pressure / Vacuum
• 7" long
• MHz Rating: 600 Mz -
5 mm Low Pressure / Vacuum NMR Tube, 8" (600 MHz)
535-LPV-8$138.902-4 weeks• Precision NMR tube
• Low Pressure / Vacuum
• 8" long
• MHz Rating: 600 Mz -
Valve Body for Heavy Wall Tube
NE-CAV5-H-G$113.704 - 6 weeksFor Use with Pressure Valve (PCAV) and Controlled Atmosphere (CAV) Tubes -
Valve Body for Medium Wall Tube
NE-CAV5-M-G$103.404 - 6 weeksFor Use with Pressure Valve (PCAV) and Controlled Atmosphere (CAV) Tubes -
-
1.7 mm water suppression reference tube for Cryoprobes (2 mM sucrose)
Z10719$218.803-6 weeks2 mM Sucrose, 0.5 mM DSS, 2 mM NaN3 in D2O/H2O 10/90 -
5 mm Thin Wall Suprasil Precision Pressure EPR Tube, 8"
722-PV-7$402.302-4 weeks• Precision NMR tube
• High Pressure
• Thin Wall
• 8" long -
-
-
5 mm Thin Wall Low Pressure / Vacuum NMR Tube, 7" (300 MHz)
507-LPV-7$125.702-4 weeks• Precision NMR tube
• Low Pressure / Vacuum
• Thin Wall
• 7" long
• MHz Rating: 300 Mz -
5 mm Thin Wall Low Pressure / Vacuum NMR Tube, 8" (300 MHz)
507-LPV-8$125.702-4 weeks• Precision NMR tube
• Low Pressure / Vacuum
• Thin Wall
• 8" long
• MHz Rating: 300 Mz -
-
-
1.7 mm 15N & 13C pulse calibration tube
Z10721$218.803-6 weeks100 mM 15N-enriched Urea, 100 mM 13C-enriched Methanol in DMSO-d6 -
5 mm Quartz Low Pressure / Vacuum NMR Tube, 7" (500 MHz)
528-LPV-7QTZ$241.402-4 weeks• Precision NMR tube
• Low Pressure / Vacuum
• 7" long
• MHz Rating: 500 Mz -
8 mm PTFE/Silicone Septa, Pack of 12
NE-3208
3 - 4 weeks• For 5 mm Screw Thread Tubes
• Cap not included -
-
3 mm Thin Wall Suprasil Precision EPR tube, 159 mm
725-PQ-159M$65.902-4 weeksSuprasil® Precision Tube -
10 mm Thin Wall Suprasil Precision EPR tube, 200 mm
733-3PQ-200M$171.202-4 weeksSuprasil® Precision Tube -
4 mm Thin Wall Suprasil Precision EPR tube, 250 mm
735-PQ-250M$161.702-4 weeksSuprasil® Precision Tube -
-
-
4 mm ZrO2 MAS rotor, set of 5
H6283-05$2,792.901-3 weeksSet of five 4 mm ZrO2 MAS rotors (no caps included)
For use with 4 mm caps:
• Kel-F drive cap (H6304)
• SP1 drive cap (HZ12360)
• ZrO2 drive cap (HZ05951) -
8 mm Solid Top Thread Cap, Pack of 12
NE-3108T
3 - 4 weeks• For 5 mm Screw Thread Tubes
• Septa included -
-
-
-
-
1.7 mm water suppression reference tube for RT probes (10 mM sucrose)
Z10720$218.803-6 weeks10 mM Sucrose, 0.5 mM DSS, 2 mM NaN3 in D2O/H2O 10/90 -
5 mm Heavy Wall Quick Pressure Valve NMR Tube, 7" (300 MHz)
522-QPV-7$133.902-4 weeks• Precision NMR tube
• Quick Pressure Valve
• Heavy Wall
• 7" long
• MHz Rating: 300 Mz -
5 mm Heavy Wall Quick Pressure Valve NMR Tube, 8" (300 MHz)
522-QPV-8$138.602-4 weeks• Precision NMR tube
• Quick Pressure Valve
• Heavy Wall
• 8" long
• MHz Rating: 300 Mz -
5 mm Medium Wall Quick Pressure Valve NMR Tube, 7" (300 MHz)
524-QPV-7$133.902-4 weeks• Precision NMR tube
• Quick Pressure Valve
• Medium Wall
• 7" long
• MHz Rating: 300 Mz -
5 mm Thin Wall Quick Pressure Valve NMR Tube, 7" (500 MHz)
528-QPV-7$130.602-4 weeks• Precision NMR tube
• Quick Pressure Valve
• Thin Wall
• 7" long
• MHz Rating: 500 Mz -
5 mm Thin Wall Quick Pressure Valve NMR Tube, 8" (500 MHz)
528-QPV-8$137.102-4 weeks• Precision NMR tube
• Quick Pressure Valve
• Thin Wall
• 8" long
• MHz Rating: 500 Mz -
8 mm Open Top Thread Cap, Pack of 12
NE-3008
3 - 4 weeks• For 5 mm Screw Thread Tubes
• Septa not included -
5 mm Thin Wall Quick Pressure Valve NMR Tube, 7" (300 MHz)
507-QPV-7$131.902-4 weeks• Precision NMR tube
• Quick Pressure Valve
• Thin Wall
• 7" long
• MHz Rating: 300 Mz -
5 mm High Throughput NMR Tube, 7" - Pack of 50 with caps
WG-1000-7-50
Stock• Class B Borosilicate Glass
• 7" long
• Pack of 50 tubes with caps -
8 mm Solid Top Thread Cap With Rubber Liner, Pack of 12
NE-3108
3 - 4 weeks• For 5 mm Screw Thread Tubes
• Septa included -
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
3.8 mm Thin Wall Quartz Precision EPR tube, 9.50"
706-PQ-9.50$56.202-4 weeksQuartz Precision Tube -
5.0 mm SampleJet Shuttle
Z105515$2,906.30StockShuttle to hold 5.0 mm tubes for use with SampleJet system -
5 mm NMR Sample Tube, 7" (200-300 MHz)
WG-1007-7
Stock• Class B Borosilicate Glass
• 7" long
• 1 tube with cap
• MHz Rating: 200-300 MHz -
3 mm water suppression for 2D experiments reference tube
Z10048$457.403-6 weeks2 mM Lysozyme in H2O/D2O 90/10 -
-
-
-
-
-
-
-
-
5 mm White Rubber Septa, Precision, Pack of 100
WG-3891-100$87.902-4 weeks• For Precision NMR tube
• Color: Red -
5 mm Red Rubber Septa, Precision, Pack of 10
WG-3892-10
2-4 weeks• For Precision NMR tube
• Color: Red -
-
-
-
Pyrex PCAV Glass Adapter
NE-CAV-JA$48.604 - 6 weeksFor Use with Controlled Atmosphere Valve (CAV) Tubes -
3.2 mm Regular Wall ZrO2 MAS rotor, set of 5
HZ09244A$5,008.301-3 weeksSet of five 3.2 mm Regular Wall ZrO2 MAS rotors (no caps included)
For use with 3.2 mm caps for Regular Wall rotor:
• SP1 drive cap (HZ07306)
• Kel-F drive cap (HZ07308) -
-
-
-
3 mm 19F sensitivity reference tube
Z10040$297.803-6 weeks0.05% Trifluorotoluene (TFT) in Chloroform-d -
10 mm 29Si sensitivity reference tube
Z10210$420.203-6 weeks85% Hexamethyldisiloxan (HMDSO) in Benzene-d6 -
10 mm 19F sensitivity reference tube
Z10235$420.203-6 weeks0.05% Trifluorotoluene (TFT) in Chloroform-d -
-
-
3 mm 31P sensitivity reference tube
Z10038$297.803-6 weeks0.0485 M Triphenylphosphate (TPP) in Acetone-d6 -
1 mm 31P sensitivity reference tube
Z100934$154.203-6 weeks0.0485 M Triphenylphosphat (TPP) in Acetone-d6 -
10 mm 31P sensitivity reference tube
Z10202$392.003-6 weeks0.0485 M Triphenylphosphate (TPP) in Acetone-d6 -
-
1.7 mm 31P sensitivity reference tube
Z10722$237.203-6 weeks0.0485 M Triphenylphosphate (TPP) in Acetone-d6 -
1.7 mm 19F sensitivity reference tube
Z10728$268.403-6 weeks0.05% Trifluorotoluene (TFT) in Chloroform-d -
1.7 mm 1H sensitivity reference tube
Z10718$151.802-3 weeks0.1% Ethylbenzene (EB) in Chloroform-d -
5 mm SampleJet Caps without hole with code (Pack of 100)
Z106779$91.80StockCoded caps for use with SampleJet system -
-
-
3 mm gradient recovery reference tube
Z10046$189.703-6 weeks0.1 mg GDCl3/mL D2O with 1% H2O + 0.1% CH3OH 13C -
10 mm gradient recovery reference tube
Z10085$281.403-6 weeks0.1 mg GDCl3/mL D2O with 1% H2O + 0.1% CH3OH 13C -
1 mm gradient recovery reference tube
Z100933$218.803-6 weeks0.1 mg GDCl3/mL D2O with 1% H2O + 0.1% CH3OH 13C -
-
10 mm lineshape reference tube (0.3% Chloroform) for Cryoprobes
Z10702$486.102-3 weeks0.3% Chloroform (CHCl3) in Acetone-d6, 40 mm height filling -
-
-
1.7 mm gradient recovery reference tube
Z10727$218.803-6 weeks0.1 mg GDCl3/mL D2O with 1% H2O + 0.1% CH3OH 13C -
-
-
-
-
-
-
-
-
-
-
10 mm 13C sensitivity & resolution reference tube
Z10164$516.003-6 weeks40% Dioxane in Benzene-d6 -
10 mm long time experiment calibration tube
Z10160$422.703-6 weeks100 mg Cholesterylactetate + 0.5% TMS in Chloroform-d (100 mg Cholac) -
-
-
-
3 mm 1H lineshape reference tube (1% Chloroform)
Z10030$638.403-6 weeks1% Chloroform (CHCl3) in Acetone-d6 -
10 mm 1H lineshape reference tube (1% Chloroform)
Z10250$638.403-6 weeks1% Chloroform (CHCl3) in Acetone-d6 -
-
3 mm High Throughput NMR Tube, 4" - Pack of 100 without caps
WG-3000-4$141.602-4 weeks• Class B Borosilicate Glass
• 4" long
• Pack of 100 tubes without caps -
3 mm High Throughput NMR Tube, 4" - Pack of 50 without caps
WG-3000-4-50
2-4 weeks• Class B Borosilicate Glass
• 4" long
• Pack of 50 tubes without caps -
5 mm High Throughput NMR Tube, 8" - Pack of 100 with caps
WG-1000-8$155.60Stock• Class B Borosilicate Glass
• 8" long
• Pack of 100 tubes with caps -
5 mm High Throughput NMR Tube, 7" - Pack of 100 with caps
WG-1000-7$125.10Stock• Class B Borosilicate Glass
• 7" long
• Pack of 100 tubes with caps -
5 mm High Throughput NMR Tube, 4" - Pack of 100 without caps
WG-1000-4$125.10Stock• Class B Borosilicate Glass
• 4" long
• Pack of 100 tubes without caps -
10mm Symmetrical Microtube Matched with DMSO
DMS-010
2 - 4 weeks• For Bruker and Jeol probe
• 10mm Symmetrical Microtube
• Matched with DMSO -
3 mm 13C sensitivity & 1H decoupling reference tube
Z10034$420.203-6 weeks10% Ethylbenzene (EB) in Chloroform-d -
10 mm 13C sensitivity & 1H decoupling reference tube
Z10154$515.803-6 weeks10% Ethylbenzene (EB) in Chloroform-d -
-
-
-
-
1.7 mm 13C sensitivity & resolution reference tube (ASTM)
Z10724$237.203-6 weeks40% Dioxane in Benzene-d6 -
1.7 mm 13C sensitivity & 1H decoupling reference tube
Z10723$237.203-6 weeks10% Ethylbenzene (EB) in Chloroform-d -
5 mm High Throughput NMR Tube, 7" - Pack of 100 with SampleJet caps
WG-1000-7-SJ$220.00Stock• Class B Borosilicate Glass
• 7" long
• Pack of 100 tubes with SampleJet caps -
-
3 mm 15N sensitivity & 13C pulse calibration reference tube
Z10039$279.403-6 weeks90% Formamide in DMSO-d6 -
10 mm 15N sensitivity & 13C pulse calibration reference tube
Z10188$364.203-6 weeks90% Formamide in DMSO-d6 -
-
-
10 mm 1H lineshape reference tube (3% Chloroform)
Z10231$449.603-6 weeks3% Chloroform (CHCl3) in Acetone-d6 -
96 slots storage rack for Kel-F inserts
B5771$675.303-6 weeks• Ideal for storing, freezing and tracking samples
• Sturdy anodized aluminum construction render this rack autoclavable and resistant to commonly used chemicals -
-
3 mm 1H lineshape reference tube (3% Chloroform)
Z10031$311.803-6 weeks3% Chloroform (CHCl3) 0.2% TMS in Acetone-d6 -
-
-
-
-
-
4 mm Shigemi microtube set matched with Methanol-d4
MMS-004J$190.002-4 weeksCompatible with Jeol probes only -
4 mm Shigemi microtube set matched with Methanol-d4
MMS-004V$190.002-4 weeksCompatible with Varian probes only -
-
8 mm Shigemi microtube set matched with Methanol-d4
MMS-008V$460.002-4 weeksCompatible with Varian probes only -
10 mm Shigemi microtube set matched with Methanol-d4
MMS-010V$565.002-4 weeksCompatible with Varian probes only -
Spherical NMR Bulb 18 µL, Pack of 10
529-A$67.402-4 weeksFits Wilmad Precision Thin Wall NMR Tubes -
3 mm Shigemi microtube set matched with Methanol-d4
MMS-003$190.002-4 weeksCompatible with all manufacturers probes -
-
10 mm PTFE liner, 8"
NE-350-10$36.003 - 4 weeks• Compatible with New Era 10 mm O.D. 7" NMR Tube
• 1 tube liner with PTFE plug -
4 mm Medium Wall Suprasil Precision Low Pressure EPR Tube, 250 mm
727-LPV-250M
2-4 weeks• Suprasil Precision Tube
• Medium Wall
• 250 mm long -
-
3 mm High Throughput NMR Tube, 4" - Pack of 100 with SampleJet caps
WG-3000-4-SJ$204.00Stock• Class B Borosilicate Glass
• 4" long
• Pack of 100 tubes with SampleJet caps -
3 mm High Throughput NMR Tube, 7" - Pack of 100 with SampleJet caps
WG-3000-7-SJ$218.90Stock• Class B Borosilicate Glass
• 7" long
• Pack of 100 tubes with SampleJet caps