Search results for: 'NE-5-CIC 5 mm Pyrex coaxial insert cell tube for Bruker'
-
Cyclohexane-d12
Ref. Packaging I.E.(%) Price Add to... D017BB 2 x 0.75 mL 99.5% D €60.10D017FD 1 x 5 mL 99.5% D €106.80 -
Methanol-d3
Ref. Packaging I.E.(%) Price Add to... D047B 10 x 0.75 mL 99.8% D €129.30D047FD 1 x 5 mL 99.8% D €117.20 -
Ethanol-d6
Ref. Packaging I.E.(%) Price Add to... D114CB 2 x 1 mL 99% D €144.20D114FD 1 x 5 mL 99% D €282.40 -
15N GB1 in 3 mm NMR Tube
CN100313P
3 - 6 weeks• B-1 Immunoglobulin G Binding Domain (GB1)
• Residues 303-357 of the protein G, with T303Q mutation
• 6.2 kDa
• Labeling: 15N
• Protein conc.: 1 mM, 50 mM Phosphate, pH 7.0, H2O/D2O: 90/10 -
13C, 15N Ubiquitin in 3 mm NMR Tube
CCN100613P
3 - 6 weeks• Full Length Ubiquitin (Residue 1-76)
• Protein size: 6.8 kDa
• Labeling: 13C, 15N
• Protein conc.: 1 mM, 50 mM Phosphate, pH 7.0, H2O/D2O: 90/10 -
-
-
3.0 mm SampleJet Shuttle
Z105909€2,224.90StockShuttle to hold 3.0 mm tubes for use with SampleJet system -
1.7 mm SampleJet Shuttle
Z106558€276.20StockShuttle to hold 1.7 mm tubes for use with SampleJet system -
1.0 mm SampleJet Shuttle
Z107648€276.20StockShuttle to hold 1.0 mm tubes for use with SampleJet system -
Cell-Free Amino Acid mixture - 13C, 15N, D
CCDN071P
StockOne kit of amino acids mixture allows the use of 2 starter CFPS kits or 1 large scale CFPS kit -
-
-
Tool Kit for 0.7 mm MAS rotor
H149435€16,557.402-3 weeksIncludes :
• Cap Removal Tool
• Filling Tool
• Sample Packer
• Cap Set Tool
• Tool Insert -
13C, 15N, D Calbindin in 3 mm NMR Tube
CCND100113P
3 - 6 weeks• Calbindin-d9k: Vitamin D-dependent Calcium-Binding protein
• Calcium loaded (Ca and Ln loaded also available on request)
• Protein size: 8.5 kDa
• Labeling: 13C, 15N, D
• Concentration: 1 mM
• H2O/D2O: 90/10, pH: 6.0
• Protein supplied in a 3 mm NMR tube sealed under Argon -
4 mm Thin Wall Suprasil Precision Low Pressure EPR Tube, 8"
734-LPV-7€369.702-4 weeks• Suprasil Precision Tube
• Thin Wall
• 8" long -
L-Citrulline-5-13C,5,5-d2
CCD529P
2 - 4 weeksFor R&D use only. S&P testing is done on the bulk prior to packaging. -
2.5 mm cap remover for Thin Wall rotor
H13836€1,167.103-6 weeksTool for cap removal from 2.5 mm Thin Wall MAS rotor -
2.5 mm cap remover for Regular Wall rotor
HZ05503€581.203-6 weeksTool for cap removal from 2.5 mm Regular Wall MAS rotor -
-
-
-
-
-
-
-
-
-
-
13C, 15N GB1 in 3 mm NMR Tube
CCN100313P
3 - 6 weeks• B-1 Immunoglobulin G Binding Domain (GB1)
• Residues 303-357 of the protein G, with T303Q mutation
• 6.2 kDa
• Labeling: 13C, 15N
• Protein conc.: 1 mM, 50 mM Phosphate, pH 7.0, H2O/D2O: 90/10 -
-
-
13C, 15N, D Ubiquitin in 3 mm NMR Tube
CCND100613P
3 - 6 weeks• Full Length Ubiquitin (Residue 1-76)
• Protein size: 6.8 kDa
• Labeling: 13C, 15N, D
• Protein conc.: 1 mM, 50 mM Phosphate, pH 7.0, H2O/D2O: 90/10 -
-
-
2.5 mm SP1 drive cap for Thin Wall rotor
HZ06693€397.00StockFor use with 2.5 mm Thin Wall MAS rotors (HZ15196) -
2.5 mm SP1 bottom cap for Thin Wall rotor
HZ06694€264.70StockFor use with 2.5 mm Thin Wall MAS rotors (HZ15196) -
-
-
4 mm Thin Wall Suprasil Precision Pressure EPR Tube, 8"
734-PV-7€572.002-4 weeks• Precision NMR tube
• High Pressure
• Thin Wall
• 8" long -
10 mm Thin Wall Suprasil Precision Quick Pressure EPR Tube, 8"
733-3QPV-7
2-4 weeks• Precision EPR tube
• Quick Pressure Valve
• Thin Wall
• 8" long -
Omni-Fit Adapter Set
OFVA-1€20.262-4 weeksPack includes:
• One Omni-Fit Barrel Coupler (OF-50)
• One Pyrex Omni-Fit Vacuum Connector (OF-60) -
3 mm Thin Wall Precision Screw Cap NMR Tube, 7" (600 MHz)
335-TR-7€68.102-4 weeks• Precision NMR tube
• Screw-Cap
• Open Top Screw Cap and Septum included
• Thin Wall
• 7" long
• MHz Rating: 600 Mz -
10 mm Thin Wall Precision Screw Cap NMR Tube, 7" (500 MHz)
513-7TRA-7€76.302-4 weeks• Precision NMR tube
• Screw-Cap
• Open Top Screw Cap and Septum included
• Thin Wall
• 7" long
• MHz Rating: 500 Mz -
Cell-Free Methyl Labeled Leu & Val Amino Acid mixture
CCDN073P
StockOne kit of amino acids mixture allows the use of 2 starter CFPS kits or 1 large scale CFPS kit -
-
-
15 mm PTFE/Silicone Septa, Pack of 12
NE-3215
3 - 4 weeks• For 10 mm Screw Thread Tubes
• Cap not included -
10 mm Thin Wall Suprasil Precision Pressure EPR Tube, 8"
733-3PV-7
2-4 weeks• Precision NMR tube
• High Pressure
• Thin Wall
• 8" long -
13C, 15N, D GB1 in 3 mm NMR Tube
CCND100313P
3 - 6 weeks• B-1 Immunoglobulin G Binding Domain (GB1)
• Residues 303-357 of the protein G, with T303Q mutation
• 6.2 kDa
• Labeling: 13C, 15N, D
• Protein conc.: 1 mM, 50 mM Phosphate, pH 7.0, H2O/D2O: 90/10 -
-
15 mm Open Top Thread Cap, Pack of 12
NE-3015
3 - 4 weeks• For 10 mm Screw Thread Tubes
• Septa not included -
-
-
-
-
-
-
-
-
-
2.5 mm cap set tool for Regular and Thin Wall rotors
HZ16624€68.503-6 weeksTools for cap positioning on 2.5 mm Regular Wall and Thin Wall MAS rotors -
-
-
ESF 921 Insect Cell Culture Media, All Amino Acid Deficient, modified – low PYE
96-276€195.002 - 4 weeks1 L Bottle -
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
15 mm Solid Top Thread Cap With Rubber Liner, Pack of 12
NE-3115
3 - 4 weeks• For 10 mm Screw Thread Tubes
• Septa included -
-
-
-
-
3 mm Thin Wall Low Pressure / Vacuum NMR Tube, 7" (300 MHz)
307-LPV-7€180.602-4 weeks• Precision NMR tube
• Low Pressure / Vacuum
• Thin Wall
• 7" long
• MHz Rating: 300 Mz -
3 mm High Throughput NMR Tube, 7" - Pack of 50 with caps
WG-3000-7-50€175.202-4 weeks• Class B Borosilicate Glass
• 7" long
• Pack of 50 tubes with caps -
4 mm Thin Wall Suprasil Precision Quick Pressure EPR Tube, 8"
734-QPV-7€587.502-4 weeks• Precision EPR tube
• Quick Pressure Valve
• Thin Wall
• 8" long -
-
-
10 mm Heavy Wall Precision High Pressure NMR Tube, 7" (450 MHz)
513-7PVH-7€414.102-4 weeks• Precision NMR tube
• High Pressure
• Heavy Wall
• 7" long
• MHz Rating: 500 Mz -
10 mm Heavy Wall Precision High Pressure NMR Tube, 8" (450 MHz)
513-7PVH-8
2-4 weeks• Precision NMR tube
• High Pressure
• Heavy Wall
• 8" long
• MHz Rating: 450 Mz -
PTFE caps for 10 mm Tube, Pack of 25
WG-1264-10€310.502-4 weeks• For Precision Tube Only
• Material: PTFE -
PTFE caps for 3 mm Tube, Pack of 25
WG-1264-3€145.402-4 weeks• For Precision Tube Only
• Material: PTFE -
PTFE caps for 4 mm Tube, Pack of 25
WG-1264-4€145.402-4 weeks• For Precision Tube Only
• Material: PTFE -
-
-
2.5 mm SP1 drive cap for Regular Wall rotor (long stem)
HZ12600€144.802-3 weeksFor use with regular wall 2.5 mm MAS rotors (HZ05165)
Sample Volume: about 8 µL -
2'-Deoxyadenosine 5'-Monophosphate, Damp-13C10,15N5
CCN6240P01
2 - 4 weeks• 100 mg
• 98% 13C, 98% 15N -
-
2'-Deoxyguanosine 5'-Monophosphate, Dgmp-13C10,15N5
CCN6250P01
2 - 4 weeks• 100 mg
• 98% 13C, 98% 15N -
2'-Deoxyadenosine 5'-Triphosphate Datp-13C10,15N5
CCN6280P0025
2 - 4 weeks• 25 mg
• 98% 13C, 98% 15N -
-
2'-Deoxyguanosine 5'-Triphosphate Dgtp-13C10,15N5
CCN6290P0025
2 - 4 weeks• 25 mg
• 98% 13C, 98% 15N -
Shigemi Slot Tubes kit
SBMS-K€1,830.002-4 weeksKit contains:
• Five Shigemi Slot Tubes (SBMS)
• One shuttle for Slot Tube (Z137538) -
-
-
-
4 mm Si3N4 MAS rotor
K1911€929.50stock• Individual 4 mm Si3N4 MAS rotor (no caps included)
• For use with 4 mm caps: ZrO2 drive cap (HZ05951) -
4 mm sapphire MAS rotor
H8932€1,078.30stockIndividual 4 mm sapphire rotor (no caps included)
For use with 4 mm caps:
• SP1 drive cap (HZ12360)
• ZrO2 drive cap (HZ05951) -
-
10 mm Thin Wall Precision Low Pressure / Vacuum NMR Tube, 7" (500 MHz)
513-7LPV-7€215.302-4 weeks• Precision NMR tube
• Low Pressure / Vacuum
• Thin Wall
• 7" long
• MHz Rating: 500 Mz -
-
150 mL Suprasil Large Volume Dewar Flask
WG-850-B-Q€2,044.102-4 weeksFor Bruker and Jeol instruments -
150 mL Suprasil Offset Nitrogen Dewar Flask
WG-853-B-Q€2,102.102-4 weeksFor Bruker and Jeol instruments -
1.9 mm ZrO2 MAS rotor + caps
H123832€2,463.70stockPack of:
• One 1.9 mm ZrO2 MAS rotor
• Two 1.9 mm SP1 bottom caps (HZ16789)
• Two 1.9 mm SP1 drive caps (H122284) -
3 mm High Throughput NMR Tube, 8" - Pack of 50 with caps
WG-3000-8-50
2-4 weeks• Class B Borosilicate Glass
• 8" long
• Pack of 50 tubes with caps -
-
4 mm ZrO2 MAS rotor + ZrO2 cap
H14356€1,507.60stockPack of:
• One 4 mm ZrO2 MAS rotor (H6283)
• One 4 mm ZrO2 drive cap (HZ05951)
• One 4 mm Kel-F drive cap (H6304) -
-
-
-
4 mm ZrO2 MAS rotor
H6283€505.00stockIndividual 4 mm ZrO2 MAS rotor (no caps included)
For use with 4 mm caps:
• Kel-F drive cap (H6304)
• SP1 drive cap (HZ12360)
• ZrO2 drive cap (HZ05951) -
-
4 mm ZrO2 MAS rotor + Kel-F caps
H14355€713.20stockPack of:
• One 4 mm ZrO2 MAS rotor (H6283)
• Three 4 mm Kel-F drive caps (H6304) -
-
-
-
-
-
-
-
4 mm ZrO2 CRAMPS rotor with PE spacer + caps
H7358€771.403-6 weeksPack of:
• One 4 mm ZrO2 CRAMPS rotor
• Two 4 mm Kel-F drive caps
• One M2x25 cylindric screw
• One 4 mm CRAMPS PE spacer -
4 mm ZrO2 CRAMPS rotor with PTFE spacer + caps
H7360€747.603-6 weeksPack of:
• One 4 mm ZrO2 CRAMPS rotor
• Two 4 mm Kel-F drive caps
• One M2x25 cylindric screw
• One 4 mm CRAMPS PTFE spacer -
-
4 mm ZrO2 MAS rotor + Kel-F & SP1 caps
K1910€781.40stockPack of:
• One 4 mm ZrO2 MAS rotor (H6283)
• Two 4 mm Kel-F drive caps (H6304)
• One 4 mm SP1 drive caps (HZ12360) -
Complete Gel Press System, 6 mm
NE-372-6/4.2
4 - 6 weeksIncludes:
• Piston Driver
• Cap
• Piston
• Gel Chamber
• Funnel -
7 mm ZrO2 MAS rotor + ZrO2 cap
H14358€1,670.00stockPack of:
• One 7 mm ZrO2 rotor
• One 7 mm ZrO2 drive cap -
1 mm NMR capillaries 75 mm with PTFE Protective Sleeve, Pack of 10
NE-262-1-PS€120.103 - 4 weeksFor use with Microtubes -
-
-
-
-
3.2 mm Regular Wall ZrO2 MAS rotor + caps
H12135€1,411.10stockPack of:
• One 3.2 mm Regular Wall ZrO2 MAS rotor (HZ09244)
• Three 3.2 mm SP1 drive caps (HZ07306) -
-
-
-
15N SH3 in 3mm NMR Tube
CN100513P
3 - 6 weeks• SRC Homology 3 domain (SH3)
• Number of residues: 62
• Protein size: 5.6 kDa
• Labeling: 15N
• Protein conc.: 1 mM, 50 mM Phosphate, pH 7.0
• Stable for more than 2 years at 4°C -
15N SH3 in 5mm NMR Tube
CN100515P
3 - 6 weeks• SRC Homology 3 domain (SH3)
• Number of residues: 62
• Protein size: 5.6 kDa
• Labeling: 15N
• Protein conc.: 1 mM, 50 mM Phosphate, pH 7.0
• Stable for more than 2 years at 4°C -
-
-
3 mm High Throughput NMR Tube, 3" - Pack of 100 without caps
WG-3000-3
2-4 weeks• Class B Borosilicate Glass
• 3" long
• Pack of 1000 tubes without caps -
-
4 mm ZrO2 CRAMPS rotor with Kel-F spacer + caps
H7359€796.403-6 weeksPack of:
• One 4 mm ZrO2 CRAMPS rotor
• Two 4 mm Kel-F drive caps
• One M2x25 cylindric screw
• One 4 mm CRAMPS Kel-F spacer -
-
-
50 µL PTFE spacer
H11087€207.303-6 weeksFor use with 4 mm HR-MAS rotor only (HZ07213)
Pack of:
• One 50 µL HR-MAS PTFE insert
• One M2x2 Kel-F thread pin (HZ04800)
• One M2x25 cylindric screw -
-
5-Acetylamino-6-Amino-3-Methyluracil-(Ring-13C4,15N2,Amino-15N)
CCN4551P
2 - 4 weeks99% 13C, 98% 15N -
13C, 15N SH3 in 3mm NMR Tube
CCN100513P
3 - 6 weeks• SRC Homology 3 domain (SH3)
• Number of residues: 62
• Protein size: 5.6 k Da
• Labeling: 13C, 15N
• Protein conc.: 1 mM, 50 mM Phosphate, pH 7.0
• Stable for more than 2 years at 4°C -
13C, 15N SH3 in 5mm NMR Tube
CCN100515P
3 - 6 weeks• SRC Homology 3 domain (SH3)
• Number of residues: 62
• Protein size: 5.6 kDa
• Labeling: 13C, 15N
• Protein conc.: 1 mM, 50 mM Phosphate, pH 7.0
• Stable for more than 2 years at 4°C -
-
-
-
-
4 mm ZrO2 MAS rotor, set of 10
H6283-10€4,438.80stockSet of ten 4 mm ZrO2 MAS rotors (no caps included)
For use with 4 mm caps:
• Kel-F drive cap (H6304)
• SP1 drive cap (HZ12360)
• ZrO2 drive cap (HZ05951) -
-
3.2 mm Regular Wall ZrO2 MAS rotor
HZ09244€1,169.90stockIndividual 3.2 mm Regular Wall ZrO2 MAS rotor (no caps included)
For use with 3.2 mm caps for Regular Wall rotor:
• SP1 drive cap (HZ07306)
• Kel-F drive cap (HZ07308) -
7 mm ZrO2 MAS rotor + Kel-F caps
H14357€523.00stockPack of:
• One 7 mm ZrO2 rotor
• Three 7 mm Kel-F drive caps without hole -
12 µL PTFE spacer
H8549€185.303-6 weeksFor use with 4 mm HR-MAS rotor only (HZ05537, HZ05538)
Pack of:
• One 12 µL HR-MAS PTFE insert
• One M2x2 Kel-F MAS thread pin (HZ04800)
• One M2x25 cylindric screw -
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
12 µL Kel-F spacer
H8548€184.203-6 weeksFor use with 4 mm HR-MAS rotor only (HZ05537, HZ05538)
Pack of:
• One 12 µL HR-MAS Kel-F insert
• One M2x2 Kel-F MAS thread pin (HZ04800)
• One M2x25 cylindric screw -
7 mm ZrO2 CRAMPS rotor with Kel-F spacer + caps
K1921CR€723.303-6 weeksPack of:
• One 7 mm ZrO2 CRAMPS rotor
• Two 7 mm Kel-F drive caps without hole
• One cylindric screw M2x25
• One 7 mm CRAMPS Kel-F spacer -
13C, 15N, D SH3 in 3mm NMR Tube
CCND100513P
3 - 6 weeks• SRC Homology 3 domain (SH3)
• Number of residues: 62
• Protein size: 5.6 kDa
• Labeling: 13C, 15N, D
• Protein conc.: 1 mM, 50 mM Phosphate, pH 7.0
• Stable for more than 2 years at 4°C -
13C, 15N, D SH3 in 5mm NMR Tube
CCND100515P
3 - 6 weeks• SRC Homology 3 domain (SH3)
• Number of residues: 62
• Protein size: 5.6 kDa
• Labeling: 13C, 15N, D
• Protein conc.: 1 mM, 50 mM Phosphate, pH 7.0
• Stable for more than 2 years at 4°C -
7 mm ZrO2 MAS rotor + BN3 and Kel-F caps
K1921€819.50stockPack of:
• One 7 mm ZrO2 MAS rotor
• One 7 mm SP1 drive cap with hole
• One 7 mm Kel-F drive cap without hole
• One 7 mm Kel-F drive cap with hole -
1.3 mm ZrO2 MAS rotor + caps
HZ14752€2,593.40stockPack of :
• One 1.3 mm ZrO2 MAS rotor
• Two 1.3 mm SP1 bottom cap (HZ08194)
• Two 1.3 mm SP1 drive caps (HZ14381) -
-
3.2 mm Thick Bottom, Regular Wall ZrO2 MAS rotor
HZ09243€918.90stockIndividual 3.2 mm Thick Bottom, Regular Wall ZrO2 MAS rotor (no caps included)
For use with 3.2 mm caps for Regular Wall rotor:
• SP1 drive cap (HZ07306)
• Kel-F drive cap (HZ07308)