Search results for: '5 mm'
-
-
-
DISCONTINUTED (replaced by HZ16913) - 3.2 mm cap remover for Regular Wall rotor
HZ07410
3-6 weeksHas been replaced by HZ16913 -
-
-
-
-
-
-
-
10 mm Heavy Wall Precision High Pressure NMR Tube, 7" (450 MHz)
513-7PVH-7€414.102-4 weeks• Precision NMR tube
• High Pressure
• Heavy Wall
• 7" long
• MHz Rating: 500 Mz -
10 mm Heavy Wall Precision High Pressure NMR Tube, 8" (450 MHz)
513-7PVH-8
2-4 weeks• Precision NMR tube
• High Pressure
• Heavy Wall
• 8" long
• MHz Rating: 450 Mz -
-
-
-
-
-
-
-
-
-
-
-
3 and 4 mm White Rubber Septa, Precision, Pack of 100
WG-3889-100€115.902-4 weeks• For Precision NMR tube
• Color: White -
-
-
-
-
-
-
-
-
-
3 mm High Throughput NMR Tube, 8" - Pack of 50 with caps
WG-3000-8-50
2-4 weeks• Class B Borosilicate Glass
• 8" long
• Pack of 50 tubes with caps -
-
-
-
-
-
TE102 Low Temperature Aqueous Cell Spectroscopic Quality
WG-808-S-Q€3,510.302-4 weeksFor All TE102 or TE011 -
Spherical NMR Bulb 18 µL, Pack of 10
529-A€94.902-4 weeksFits Wilmad Precision Thin Wall NMR Tubes -
-
Shaped Tubes kit
Z119964€1,605.303-6 weeksKit contains:
• Five Shaped tubes (Z106898)
• One shuttle for shaped tube (Z75327)
• Five caps for shaped tube (Z107144) -
-
Kel-F thread pin
HZ04800€23.303-6 weeksFor use with 4 mm HR-MAS rotor only (HZ05537, HZ05538, HZ07213) Material : PTFE , Sample Vol.: 12 µL, T° Range: (+10 to +50°C) -
PTFE caps for 10 mm Tube, Pack of 25
WG-1264-10€310.502-4 weeks• For Precision Tube Only
• Material: PTFE -
PTFE caps for 3 mm Tube, Pack of 25
WG-1264-3€145.402-4 weeks• For Precision Tube Only
• Material: PTFE -
PTFE caps for 4 mm Tube, Pack of 25
WG-1264-4€145.402-4 weeks• For Precision Tube Only
• Material: PTFE -
150 mL Suprasil Large Volume Dewar Flask
WG-850-B-Q€2,044.102-4 weeksFor Bruker and Jeol instruments -
150 mL Suprasil Nitrogen Dewar Flask
WG-850-Q€2,044.102-4 weeksFor Micro-Now, Radio-Pan and Agilent instruments -
150 mL Suprasil Offset Nitrogen Dewar Flask
WG-853-B-Q€2,102.102-4 weeksFor Bruker and Jeol instruments -
-
-
Precision Thin Wall Quartz Sleeve, 5.5 x 6.0 x 58.6 mm
NE-295-5A€138.504 - 6 weeksFor Bruker Late Model Probes -
Precision Thin Wall Quartz Sleeve, 5.8 x 6.1 x 54.5 mm
NE-295-5B€195.604 - 6 weeksFor Bruker Dual Flow Probes -
-
-
-
-
-
-
50 µL PTFE spacer
H11087€207.303-6 weeksFor use with 4 mm HR-MAS rotor only (HZ07213)
Pack of:
• One 50 µL HR-MAS PTFE insert
• One M2x2 Kel-F thread pin (HZ04800)
• One M2x25 cylindric screw -
12 µL PTFE spacer
H8549€185.303-6 weeksFor use with 4 mm HR-MAS rotor only (HZ05537, HZ05538)
Pack of:
• One 12 µL HR-MAS PTFE insert
• One M2x2 Kel-F MAS thread pin (HZ04800)
• One M2x25 cylindric screw -
12 µL Kel-F spacer
H8548€184.203-6 weeksFor use with 4 mm HR-MAS rotor only (HZ05537, HZ05538)
Pack of:
• One 12 µL HR-MAS Kel-F insert
• One M2x2 Kel-F MAS thread pin (HZ04800)
• One M2x25 cylindric screw -
3 mm High Throughput NMR Tube, 3" - Pack of 100 without caps
WG-3000-3
2-4 weeks• Class B Borosilicate Glass
• 3" long
• Pack of 1000 tubes without caps -
-
-
-
-
-
-
Shigemi Slot Tubes kit
SBMS-K€1,830.002-4 weeksKit contains:
• Five Shigemi Slot Tubes (SBMS)
• One shuttle for Slot Tube (Z137538) -
-
-
Complete Tip-Off Adapter/Valve system
NE-253-5€375.203 - 4 weeksContains:
• 1 Glass Body
• 1 PTFE Plug
‡ 2 PTFE-Clad O-Rings
‡ One Bushing/Heat Shield with O-Rings -
-
-
-
-
W Band Suprasil EPR Tube both ends open, 40 mm, Pack of 10
WG-213ST9S€303.002-4 weeks• For photochemistry studies
• Suprasil®
• Cutoff wavelength: 190 nm -
W Band Suprasil EPR Tube one end sealed, 40 mm, Pack of 10
WG-213ST9S-RB€396.602-4 weeks• For photochemistry studies
• Suprasil®
• Cutoff wavelength: 190 nm -
Q Band Suprasil EPR Tube both ends open, 100 mm, Pack of 10
WG-222T€374.002-4 weeks• For photochemistry studies
• Suprasil®
• Cutoff wavelength: 190 nm -
Q Band Suprasil EPR Tube one end sealed, 100 mm, Pack of 10
WG-222T-RB€425.602-4 weeks• For photochemistry studies
• Suprasil®
• Cutoff wavelength: 190 nm -
Q Band CFQ EPR Tube one end sealed, 100 mm, Pack of 10
WG-221T-RB€318.002-4 weeks• For photochemistry studies
• Cleared Fused QuartzQ
• Cutoff wavelength: 190 nm -
-
-
Tool for HR-MAS spacer
HZ04875€25.503-6 weeksFor use with 4mm HR-MAS rotor only (HZ05537, HZ05538, HZ07213) -
Tool Kit for 50 mL HR-MAS rotor
B2950€40.903-6 weeksFor use with 50 µL HR-MAS rotor only (HZ07213)
Kit contains:
• One extration tool
• One scredriver
• One depth gauge -
96 slots storage rack for Kel-F inserts
B5771€516.003-6 weeks• Ideal for storing, freezing and tracking samples
• Sturdy anodized aluminum construction render this rack autoclavable and resistant to commonly used chemicals -