Search results for: 'NMR'

Tools for cap positioning on 1.9 mm MAS rotor

Tool for cap removal from 1.9 mm MAS rotor

For use with 3.2 mm Thin Wall MAS rotors (HZ16252)

For use with CRAMPS rotor only

For use with CRAMPS rotor only

For use with CRAMPS rotor only

Tool for sample loading into 7 mm MAS rotor

Tool for sample loading into 4 mm MAS rotor

• Individual 4 mm Si₃N₄ MAS rotor (no caps included)
• For use with 4 mm caps: ZrO₂ drive cap (HZ05951)

Pack of:
• One 7 mm ZrO₂ MAS rotor
• One 7 mm SP1 drive cap with hole
• One 7 mm Kel-F drive cap without hole
• One 7 mm Kel-F drive cap with hole

Pack of:
• One 7 mm ZrO₂ CRAMPS rotor
• Two 7 mm Kel-F drive caps without hole
• One cylindric screw M2x25
• One 7 mm CRAMPS Kel-F spacer

discontinued, please refer to H6304, HZ12360 or HZ05951 for alternative caps

For use with 0.7 mm MAS rotor

For use with 0.7 mm MAS rotor

Tools for cap positioning on 7 mm MAS rotors

Includes :
• Cap Removal Tool
• Filling Tool
• Sample Packer
• Cap Set Tool
• Tool Insert

For use with regular wall 2.5 mm MAS rotors (HZ05165)
Sample Volume: about 8 µL

Tool for cap removal for 3.2 mm Regular and Thin Wall MAS rotor

Pack of:
• One 4 mm ZrO₂ MAS rotor (H6283)
• Two 4 mm Kel-F drive caps (H6304)
• One 4 mm SP1 drive caps (HZ12360)

Pack of
• One 3.2 mm thin wall MAS rotor
• Three SP1 drive caps

For use with 3.2 mm Thin Wall MAS rotors (HZ16252)
• T° Range: (-30 to +70°C)

Has been replaced by HZ16913

For use with:
• 3.2 mm Regular Wall MAS rotors (HZ09244)
• 3.2 mm sapphire rotor (B6939)
• T° Range: (-30 to +70°C)

For use with:
• 3.2 mm Regular Wall rotor (HZ09244)
• 3.2 mm sapphire rotor (B6939)

• For Bruker and Jeol probe
• 10mm Symmetrical Microtube
• Matched with DMSO

For use with 3.2 mm caps for Regular Wall rotor:
• SP1 drive cap (HZ07306)
• ZrO₂ drive cap (HZ12372)

Kit contains:
• Ten silicone soft plugs with silica tubing
• One 3.2mm soft plug depth gauge
• One 3.2mm soft plug removal tool

Pack of:
• One 3.2 mm sapphire rotor (B6939)
• One 3.2 mm SP1 drive cap (HZ07306)
• Two 3.2 mm ZrO₂ drive caps (HZ12372)

Shuttle to hold 5.0 mm tubes for use with SampleJet system

Shuttle to hold 3.0 mm tubes for use with SampleJet system

Shuttle to hold 1.7 mm tubes for use with SampleJet system

Coded caps for use with SampleJet system

Coded caps for SampleJet use

Shuttle to hold 1.0 mm tubes for use with SampleJet system

For use with 3.2 mm caps for Regular Wall rotor:
• SP1 drive cap (HZ07306)
• ZrO₂ drive cap (HZ12372)

• 75 mm long
• Pyrex®
• Sealed at one end

• 203 mm long
• Pyrex®
• Sealed at one end

• 5" long
• Pyrex®
• Sealed at one end

• 203 mm long
• Pyrex®
• Sealed at one end

• 100 mm long
• Pyrex®
• Sealed at one end

• 100 mm long
• Pyrex®
• Sealed at one end
• For Agilent Cold Probe

• 203 mm long
• Pyrex®
• Sealed at one end

• 100 mm long
• Pyrex®
• Both Ends Open

• 100 mm long
• Pyrex®
• Both Ends Open

• 100 mm long
• Pyrex®
• Both Ends Open

• 100 mm long
• Pyrex®
• Both Ends Open
• For Agilent Cold Probe

• 100 mm long
• Pyrex®
• Sealed at one end

• For Precision Tube Only
• Material: PTFE

• For Precision Tube Only
• Material: PTFE

• For Precision Tube Only
• Material: PTFE

• For Precision Tube Only
• Material: PTFE

To secure support rod

For use with Agilent and Jeol Probes

For End Gel Plug

For use with Bruker Probes

For Extraction of End Plug

For all gel chambers

For all gel chambers

Fits gel chamber NE-372-D-5

Fits gel chamber NE-372-C-5.4

For Piston NE-372-C-5.4

Fits gel chamber NE-372-D-6

For Piston NE-372-C-6

For casting 5 mm gels

For casting 5.4 mm gels

For casting 6 mm gels

For stretch from 5 mm to 4.2 mm

For stretch from 5.4 mm to 4.2 mm

For stretch from 6 mm to 4.2 mm

Includes 1 Sample Tube NE-UP5-CGT

Includes:
• Piston Driver
• Cap
• Piston
• Gel Chamber
• Funnel

Includes:
• Piston Driver
• Cap
• Piston
• Gel Chamber
• Funnel

Includes:
• Piston Driver
• Cap
• Piston
• Gel Chamber
• Funnel

#9 Silicon Joint

ISO 29/32 Taper Joint

Tube Only

• Precision EPR tube
• Quick Pressure Valve
• Thin Wall
• 8" long

• System includes Inner Insert and Flat Bottom Outer Tube
• Field Compatibility: Up to 600 MHz

• Precision EPR tube
• Quick Pressure Valve
• Thin Wall
• 8" long

For use with Thin Wall Tubes

• Precision EPR tube
• Omni-Fit tube only
• 8" long
•