Search results for: '5 mm NMR'
-
Hexafluoroisopropanol-d2
Ref. Packaging I.E.(%) Price Add to... D052CB 2 x 1 mL 99% D €375.5 D052FD 1 x 5 mL 99% D €771.9 -
1.0 mm Capillary Tube (400 MHz), Pack of 10
WG-1364-1€56.702-4 weeks• 75 mm long
• Pyrex®
• Sealed at one end -
2.0 mm Capillary Tube (400 MHz), Pack of 10
WG-1364-2€66.902-4 weeks• 100 mm long
• Pyrex®
• Sealed at one end -
-
1.0 mm Capillary Tube (400 MHz), Pack of 10
WG-1364-1-203M€29.302-4 weeks• 203 mm long
• Pyrex®
• Sealed at one end -
2.0 mm Capillary Tube (400 MHz), Pack of 10
WG-1364-2-203M€29.302-4 weeks• 203 mm long
• Pyrex®
• Sealed at one end -
1.7 mm Capillary Tube (400 MHz), Pack of 10
WG-1364-1.7€54.002-4 weeks• 100 mm long
• Pyrex®
• Sealed at one end -
3 mm High Throughput NMR Tube, 4" - Pack of 100 with SampleJet caps
WG-3000-4-SJ€273.50Stock• Class B Borosilicate Glass
• 4" long
• Pack of 100 tubes with SampleJet caps -
3 mm High Throughput NMR Tube, 7" - Pack of 100 with SampleJet caps
WG-3000-7-SJ€305.50Stock• Class B Borosilicate Glass
• 7" long
• Pack of 100 tubes with SampleJet caps -
-
-
10 mm PTFE liner, 8"
NE-350-10€50.803 - 4 weeks• Compatible with New Era 10 mm O.D. 7" NMR Tube
• 1 tube liner with PTFE plug -
3.0 mm SampleJet Shuttle
Z105909€2,224.90StockShuttle to hold 3.0 mm tubes for use with SampleJet system -
1.7 mm SampleJet Shuttle
Z106558€276.20StockShuttle to hold 1.7 mm tubes for use with SampleJet system -
1.0 mm SampleJet Shuttle
Z107648€276.20StockShuttle to hold 1.0 mm tubes for use with SampleJet system -
3 mm 15N sensitivity & 13C pulse calibration reference tube
Z10039€219.303-6 weeks90% Formamide in DMSO-d6 -
10 mm 15N sensitivity & 13C pulse calibration reference tube
Z10188€285.903-6 weeks90% Formamide in DMSO-d6 -
-
Tool Kit for 3.2 mm Thin Wall rotor
B136904€831.20StockKit contains:
• 3.2 mm cap remover for Thin Wall rotor
• 3.2 mm filling funnel for Thin Wall rotor
• 3.2 mm cap set tool for Thin Wall rotor
• 3.2 mm packer for Thin Wall rotor -
4 mm Thin Wall Suprasil Precision Pressure EPR Tube, 8"
734-PV-7€572.002-4 weeks• Precision NMR tube
• High Pressure
• Thin Wall
• 8" long -
Cap set tool for 7 mm MAS rotor
H148487€84.102-3 weeksTools for cap positioning on 7 mm MAS rotors -
5 mm Thin Wall Suprasil Precision Low Pressure EPR Tube, 8"
722-LPV-7€421.202-4 weeks• Suprasil Precision Tube
• Thin Wall
• 8" long -
-
10 mm Thin Wall Suprasil Precision Pressure EPR Tube, 8"
733-3PV-7
2-4 weeks• Precision NMR tube
• High Pressure
• Thin Wall
• 8" long -
8 mm Shigemi Advanced microtube set matched with Methanol-d4
MMS-008TB€485.002-4 weeksCompatible with Bruker probes only -
8 mm Shigemi Advanced microtube set matched with Methanol-d4
MMS-008TV€485.002-4 weeksCompatible with Varian probes only -
3.2 mm sapphire DNP rotor + caps
H13861€3,111.30stockPack of:
• One 3.2 mm sapphire rotor (B6939)
• One 3.2 mm SP1 drive cap (HZ07306)
• Two 3.2 mm ZrO2 drive caps (HZ12372) -
-
10 mm 1H lineshape reference tube (3% Chloroform)
Z10231€361.203-6 weeks3% Chloroform (CHCl3) in Acetone-d6 -
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
3 mm 1H lineshape reference tube (3% Chloroform)
Z10031€249.403-6 weeks3% Chloroform (CHCl3) 0.2% TMS in Acetone-d6 -
-
Combination pH electrode with BNC connector (also known as #5 connector)
6030-02-BNC€1,664.102-4 weeksFor use in 5mm thin walled NMR tubes up to 8 inches in length -
-
3.2 mm ZrO2 drive cap for Regular Wall rotor
HZ12372€1,169.90Delivery time to be confirmedFor use with:
• 3.2 mm Regular Wall rotor (HZ09244)
• 3.2 mm sapphire rotor (B6939) -
1.7 mm Capillary Tube (400 MHz), Pack of 10
WG-1364-1.7-203M€28.602-4 weeks• 203 mm long
• Pyrex®
• Sealed at one end -
-
3.2 mm sample packer for Regular Wall rotor
HZ07607€110.503-6 weeksTool for sample compression into 3.2 mm Regular Wall MAS rotor -
3.2 mm filling tool for Regular Wall rotor
HZ07608€33.103-6 weeksTool for sample loading into 3.2 mm Regular Wall MAS rotor -
10 mm Shigemi microtube set matched with D2O
BMS-010BJ€510.002-4 weeksCompatible with Bruker and Jeol probes -
-
3.2 mm PTFE Insert for Regular Wall rotor
HZ13618€40.903-6 weeksFor use with 3.2 mm Thick Bottom, Regular Wall MAS rotors (HZ09243) -
-
-
-
-
-
-
10 mm Shigemi microtube set matched with Chloroform-d
CMS-010BJ€510.002-4 weeksCompatible with Bruker and Jeol probes -
10 mm Shigemi microtube set matched with DMSO-d6
DMS-010BJ€525.002-4 weeksCompatible with Bruker and Jeol probes -
8 mm Shigemi microtube set matched with D2O
BMS-008BJ€440.002-4 weeksCompatible with Bruker and Jeol probes -
8 mm Shigemi microtube set matched with D2O
BMS-008V€440.002-4 weeksCompatible with Varian probes only -
10 mm Shigemi microtube set matched with D2O
BMS-010V€565.002-4 weeksCompatible with Varian probes only -
4 mm Shigemi microtube set matched with D2O
BMS-004B€175.00StockCompatible with Bruker probes only -
-
4 mm Shigemi microtube set matched with D2O
BMS-004V€175.00StockCompatible with Varian probes only -
3.2 mm SP1 drive cap for Thin Wall rotor
HZ16253€237.70StockFor use with 3.2 mm Thin Wall MAS rotors (HZ16252) -
8 mm PTFE/Silicone Septa, Pack of 12
NE-3208
3 - 4 weeks• For 5 mm Screw Thread Tubes
• Cap not included -
8 mm Solid Top Thread Cap, Pack of 12
NE-3108T
3 - 4 weeks• For 5 mm Screw Thread Tubes
• Septa included -
8 mm Pyrex Thin Wall NMR Tube, 7" (400-500 MHz)
NE-H8-7€60.703 - 4 weeks• Thin Wall
• Class A Borosilicate Glass
• 7" long
• 1 tube with cap
• MHz Rating: 400 - 500 MHz -
8 mm Pyrex Thin Wall NMR Tube, 8" (400-500 MHz)
NE-H8-8€63.903 - 4 weeks• Thin Wall
• Class A Borosilicate Glass
• 8" long
• 1 tube with cap
• MHz Rating: 400 - 500 MHz -
15 mm Pyrex Thin Wall NMR Tube, 7" (200-300 MHz)
NE-L15-7
4 - 6 weeks• Thin Wall
• Class A Borosilicate Glass
• 7" long
• 1 tube with cap
• MHz Rating: 200 - 300 MHz -
16 mm Pyrex Thin Wall NMR Tube, 7" (200-300 MHz)
NE-L16-7
4 - 6 weeks• Thin Wall
• Class A Borosilicate Glass
• 7" long
• 1 tube with cap
• MHz Rating: 200 - 300 MHz -
20 mm Pyrex Thin Wall NMR Tube, 7" (200-300 MHz)
NE-L20-7
4 - 6 weeks• Thin Wall
• Class A Borosilicate Glass
• 7" long
• 1 tube with cap
• MHz Rating: 200 - 300 MHz -
8 mm Pyrex Thin Wall NMR Tube, 7" (100-300 MHz)
NE-L8-7€45.704 - 6 weeks• Thin Wall
• Class A Borosilicate Glass
• 7" long
• 1 tube with cap
• MHz Rating: 100 - 300 MHz -
8 mm Pyrex Thin Wall NMR Tube, 8" (100-300 MHz)
NE-L8-8€48.304 - 6 weeks• Thin Wall
• Class A Borosilicate Glass
• 8" long
• 1 tube with cap
• MHz Rating: 100 - 300 MHz -
8 mm Shigemi microtube set matched with Chloroform-d
CMS-008BJ€440.002-4 weeksCompatible with Bruker and Jeol probes -
8 mm Shigemi microtube set matched with Chloroform-d
CMS-008V€440.002-4 weeksCompatible with Varian probes only -
10 mm Shigemi microtube set matched with Chloroform-d
CMS-010V€565.002-4 weeksCompatible with Varian probes only -
8 mm Shigemi microtube set matched with DMSO-d6
DMS-008BJ€460.002-4 weeksCompatible with Bruker and Jeol probes -
8 mm Shigemi microtube set matched with DMSO-d6
DMS-008V€460.002-4 weeksCompatible with Varian probes only -
10 mm Shigemi microtube set matched with DMSO-d6
DMS-010V€565.002-4 weeksCompatible with Varian probes only -
4 mm Shigemi microtube set matched with Chloroform-d
CMS-004B€175.002-4 weeksCompatible with Bruker probes only -
4 mm Shigemi microtube set matched with Chloroform-d
CMS-004J€175.002-4 weeksCompatible with Jeol probes only -
4 mm Shigemi microtube set matched with Chloroform-d
CMS-004V€175.002-4 weeksCompatible with Varian probes only -
4 mm Shigemi microtube set matched with DMSO-d6
DMS-004B€190.002-4 weeksCompatible with Bruker probes only -
4 mm Shigemi microtube set matched with DMSO-d6
DMS-004J€190.002-4 weeksCompatible with Jeol probes only -
4 mm Shigemi microtube set matched with DMSO-d6
DMS-004V€190.002-4 weeksCompatible with Varian probes only -
2.5 mm Shigemi microtube set matched with D2O
BMS-0025€205.002-4 weeksCompatible with Bruker probes only -
3 mm Shigemi microtube set matched with D2O
BMS-003€175.00StockCompatible with all manufacturers probes -
-
-
-
-
Economy U-Shaped 5 mm Single Tube Washer
WG-1207-J5€223.302-4 weeks• With 24/40 Inner Joint
• For 7" Tubes -
-
-
3 mm High Throughput NMR Tube, 8" - Pack of 50 with caps
WG-3000-8-50
2-4 weeks• Class B Borosilicate Glass
• 8" long
• Pack of 50 tubes with caps -
15 mm Pyrex Medium Wall NMR Tube, 7" (200-300 MHz)
NE-L15-M-7
4 - 6 weeks• Medium Wall
• Class A Borosilicate Glass
• 7" long
• 1 tube with cap
• MHz Rating: 200 - 300 MHz -
-
-
-
-
-
-
-
8 mm Open Top Thread Cap, Pack of 12
NE-3008
3 - 4 weeks• For 5 mm Screw Thread Tubes
• Septa not included -
10 mm Heavy Wall Controlled Atmosphere Valve Pyrex NMR Tube (300-500 MHz)
NE-CAV10-H-170€280.502 - 3 weeks -
3.2 mm Kel-F drive cap for Thin Wall rotor
HZ16908€200.70StockFor use with 3.2 mm Thin Wall MAS rotors (HZ16252) -
3 mm Shigemi microtube set matched with Chloroform-d
CMS-003€175.002-4 weeksCompatible with all manufacturers probes -
3 mm Shigemi microtube set matched with DMSO-d6
DMS-003€190.002-4 weeksCompatible with all manufacturers probes -
-
-
3.2 mm SP1 drive cap for Regular Wall rotor
HZ07306€152.30StockFor use with:
• 3.2 mm Regular Wall MAS rotors (HZ09244)
• 3.2 mm sapphire rotor (B6939)
• T° Range: (-30 to +70°C) -
2.5 mm Shigemi microtube set matched with Chloroform-d
CMS-0025€205.002-4 weeksCompatible with Bruker probes only -
2.5 mm Shigemi microtube set matched with DMSO-d6
DMS-0025€205.002-4 weeksCompatible with Bruker probes only -
3.2 mm Regular and Thin Wall rotor cap remover
HZ16913€751.602-3 weeksTool for cap removal for 3.2 mm Regular and Thin Wall MAS rotor -
3.2 mm sapphire rotor
B6939€1,338.80stockFor use with 3.2 mm caps for Regular Wall rotor:
• SP1 drive cap (HZ07306)
• ZrO2 drive cap (HZ12372) -
Set of 10 Kel-F inserts for 4 mm MAS rotor
B4493€253.20StockFor use with 4 mm MAS rotor (H6283)
Each set contains:
• Ten Kel-F inserts
• Ten sealing screws
• Ten plugs
• One set of tools (Fork screwdriver, blunt-ended screwdriver, extraction screw) -
8 mm Shigemi Advanced microtube set matched with D2O
BMS-008TB€460.002-4 weeksCompatible with Bruker probes only -
8 mm Shigemi Advanced microtube set matched with D2O
BMS-008TV€460.002-4 weeksCompatible with Varian probes only -
8 mm Solid Top Thread Cap With Rubber Liner, Pack of 12
NE-3108
3 - 4 weeks• For 5 mm Screw Thread Tubes
• Septa included -
-
8 mm Shigemi Advanced microtube set matched with Chloroform-d
CMS-008TB€460.002-4 weeksCompatible with Bruker probes only -
8 mm Shigemi Advanced microtube set matched with Choroform-d
CMS-008TV€460.002-4 weeksCompatible with Varian probes only -
8 mm Shigemi Advanced microtube set matched with DMSO-d6
DMS-008TB€485.002-4 weeksCompatible with Bruker probes only -
8 mm Shigemi Advanced microtube set matched with DMSO-d6
DMS-008TV€485.002-4 weeksCompatible with Varian probes only -
-
2.5 mm Capillary Tube (400 MHz), Pack of 10
WG-1364-2.5A€78.202-4 weeks• 100 mm long
• Pyrex®
• Sealed at one end
• For Agilent Cold Probe -
3.2 mm cap set tool for Regular and Thin Wall rotors
HZ16621€44.503-6 weeksTools for cap positioning on 3.2 mm Regular Wall and Thin Wall MAS rotors -
-
3.2 mm SP1 bottom cap for Thin Wall rotor
HZ16254€229.403-6 weeksFor use with 3.2 mm Thin Wall MAS rotors (HZ16252)
• T° Range: (-30 to +70°C) -
-
4 mm SP1 cap for High Speed rotor
HZ06427€253.60StockFor use with 4 mm High Speed MAS rotor only. Please refer to item HZ12360 for regular 4mm SP1 cap -
-
4 mm Medium Wall Suprasil Precision Low Pressure EPR Tube, 250 mm
727-LPV-250M€246.402-4 weeks• Suprasil Precision Tube
• Medium Wall
• 250 mm long -
5 mm Thin Wall Suprasil Screw Cap EPR Tube, 7"
722-TR-7€303.102-4 weeks• Precision Quartz EPR tube
• Screw-Cap
• Thin Wall
• 7" long -
-
-
-
10 mm Thin Wall Controlled Atmosphere Valve Pyrex NMR Tube (300-500 MHz)
NE-CAV10-170€222.302 - 3 weeks -
3 mm High Throughput NMR Tube, 3" - Pack of 100 without caps
WG-3000-3
2-4 weeks• Class B Borosilicate Glass
• 3" long
• Pack of 1000 tubes without caps -
-
10 mm Medium Wall Controlled Atmosphere Valve Pyrex NMR Tube (300-500 MHz)
NE-CAV10-M-170€246.902 - 3 weeks -
3 and 4 mm White Rubber Septa, Precision, Pack of 100
WG-3889-100€115.902-4 weeks• For Precision NMR tube
• Color: White -
-
-
-
Complete Gel Press System, 5.4 mm
NE-372-5.4/4.2
4 - 6 weeksIncludes:
• Piston Driver
• Cap
• Piston
• Gel Chamber
• Funnel -
13C, 15N SH3 in 1.3mm Bruker rotor
CCN100521P
3 - 6 weeks• SRC Homology 3 domain (SH3)
• Number of residues: 62
• Protein size: 5.6 kDa
• Labeling: 13C, 15N -
-
13C, 15N, D SH3 in 1.3mm Bruker rotor
CCND100521P
3 - 6 weeks• SRC Homology 3 domain (SH3)
• Number of residues: 62
• Protein size: 5.6 kDa
• Labeling: 13C, 15N, D -
-
-
4 mm Thin Wall Quartz Precision EPR tube, 250 mm
715-PQ-250M€140.102-4 weeksQuartz Precision Tube -
3 mm Thin Wall Suprasil Precision EPR tube, 159 mm
725-PQ-159M€102.502-4 weeksSuprasil® Precision Tube -
10 mm Thin Wall Suprasil Precision EPR tube, 200 mm
733-3PQ-200M€224.302-4 weeksSuprasil® Precision Tube -
4 mm Thin Wall Suprasil Precision EPR tube, 250 mm
735-PQ-250M€231.802-4 weeksSuprasil® Precision Tube -
-
3.2 mm Thick Bottom, Regular Wall ZrO2 MAS rotor + caps + PTFE spacer
HZ13706€1,296.60stockPack of:
• One 3.2mm Thick Bottom, Regular Wall ZrO2 MAS rotor (HZ09243)
• One 3.2mm SP1 drive cap (HZ07306)
• Two 3.2mm Kel-F drive cap (HZ07308)
• One PTFE spacer (HZ13618) -
13C, 15N Ubiquitin in 3.2 mm Bruker rotor
CCND100623P
3 - 6 weeks• Full length Ubiquitin (Residue 1-76)
• Protein size: 6.8 kDa
• Labeling: 13C, 15N -
13C, 15N GB1 in 3.2 mm Bruker rotor
CCN100323P
3 - 6 weeks• B-1 Immunoglobulin G Binding Domain (GB1)
• Residues 303-357 of the protein G, with T303Q mutation
• Size: 6.2 kDa
• Labeling: 13C, 15N -
13C, 15N, D Ubiquitin in 3.2 mm Bruker rotor
CCN100623P
3 - 6 weeks• Full length Ubiquitin (Residue 1-76)
• Protein size: 6.8 kDa
• Labeling: 13C, 15N, D -
13C, 15N, D GB1 in 3.2 mm Bruker rotor
CCND100323P
3 - 6 weeks• B-1 Immunoglobulin G Binding Domain (GB1)
• Residues 303-357 of the protein G, with T303Q mutation
• Size: 6.2 kDa
• Labeling: 13C, 15N, D -
-
-
-
-
-
-
-
-
-
-
-
4 mm Macor drive cap
K1935
discontinued, please refer to H6304, HZ12360 or HZ05951 for alternative capsdiscontinued, please refer to H6304, HZ12360 or HZ05951 for alternative caps -
-
-
-
-
-
-
-